rar文件

VMware_SVGA_II.rar 评分:

vmware workstation 可用的显卡驱动
2014-05-22 上传 大小：42KB
立即下载
zip文件
虚拟机D3D显卡驱动(vmware svga ii.rar) 最新版.zip

新装虚拟机win7系统的，感觉显示卡的、抖动、这些的可以试试这个驱动程序。装完这个驱动程序，一般重启动一次虚拟机，显示就会好很多的，不像原来那样卡了！

立即下载
7z文件
全志R16+GC2035_只有VGA分辨率_增加设备节点了20170928_2016.7z

全志R16平台 parrotv1.1（Android4.4.2） /* * Store information about the video data format. */ static struct sensor_format_struct { __u8 *desc; //__u32 pixelformat; enum v4l2_mbus_pixelcode mbus_code;//linux-3.0 struct regval_list *regs; int regs_size; int bpp; /* Bytes per pixel */ } sensor_formats[] = { //{ // .desc = "YUYV 4:2:2", // .mbus_code = V4L2_MBUS_FMT_YUYV8_2X8,//linux-3.0 // .regs = sensor_fmt_yuv422_yuyv, // .regs_size = ARRAY_SIZE(sensor_fmt_yuv422_yuyv), // .bpp = 2, //}, //{ // .desc = "YVYU 4:2:2", // .mbus_code = V4L2_MBUS_FMT_YVYU8_2X8,//linux-3.0 // .regs = sensor_fmt_yuv422_yvyu, // .regs_size = ARRAY_SIZE(sensor_fmt_yuv422_yvyu), // .bpp = 2, //}, { .desc = "UYVY 4:2:2", .mbus_code = V4L2_MBUS_FMT_UYVY8_2X8,//linux-3.0 .regs = sensor_fmt_yuv422_uyvy, .regs_size = ARRAY_SIZE(sensor_fmt_yuv422_uyvy), .bpp = 2, }, //{ // .desc = "VYUY 4:2:2", // .mbus_code = V4L2_MBUS_FMT_VYUY8_2X8,//linux-3.0 // .regs = sensor_fmt_yuv422_vyuy, // .regs_size = ARRAY_SIZE(sensor_fmt_yuv422_vyuy), // .bpp = 2, //}, //{ // .desc = "Raw RGB Bayer", // .mbus_code = V4L2_MBUS_FMT_SBGGR8_1X8,//linux-3.0 // .regs = sensor_fmt_raw, // .regs_size = ARRAY_SIZE(sensor_fmt_raw), // .bpp = 1 //}, }; #define N_FMTS ARRAY_SIZE(sensor_formats) /* * Then there is the issue of window sizes. Try to capture the info here. */ static struct sensor_win_size sensor_win_sizes[] = { // /* UXGA */ // { // .width = UXGA_WIDTH, // .height = UXGA_HEIGHT, // .hoffset = 0, // .voffset = 0, // .regs = sensor_uxga_regs, // .regs_size = ARRAY_SIZE(sensor_uxga_regs), // .set_size = NULL, // }, //// /* 720p */ //// { //// .width = HD720_WIDTH, //// .height = HD720_HEIGHT, //// .hoffset = 0, //// .voffset = 0, //// .regs = Gc2015_sensor_hd720_regs, //// .regs_size = ARRAY_SIZE(Gc2015_sensor_hd720_regs), //// .set_size = NULL, //// }, // /* SVGA */ // { // .width = SVGA_WIDTH, // .height = SVGA_HEIGHT, // .hoffset = 0, // .voffset = 0, // .regs = sensor_svga_regs, // .regs_size = ARRAY_SIZE(sensor_svga_regs), // .set_size = NULL, // }, // /* VGA */ // { // .width = VGA_WIDTH, // .height = VGA_HEIGHT, // .hoffset = 0, // .voffset = 0, // .regs = sensor_vga_regs, // .regs_size = ARRAY_SIZE(sensor_vga_regs), // .set_size = NULL, // }, /* VGA */ { .width = VGA_WIDTH, .height = VGA_HEIGHT, .hoffset = 0, .voffset = 0, .regs = sensor_default_regs, .regs_size = ARRAY_SIZE(sensor_default_regs), .set_size = NULL, }, };

立即下载
zip文件
svga_bgi.zip_BGI_driver do SVGA16.BGI_svga_svga256.bgi_tc svga16

tc中的图形驱动(svga256.bgi,svga16.bgi)

立即下载
rar文件
svga.rar_Turbo C_Turbo c图形_dos 图形_ms dos_svga

svga图形编程库，适用DOS,borlandc 3.1 turbo c, MS-C.可实现 256色以上编程

立即下载
rar文件
lj.rar_DOS_DOS 界面_Pocket dos window 3_svga16.bgi_价值

DOS仿Window3.2界面编程,经典,没有使用价值,但是可以参考留念

立即下载
zip文件
Windows程序反安装程序.zip_color_mscomctl.ocx_svga_video card_video ram

File Pendukung : - Msvbvm60.dll - Vb6stkit.dll - Mscomctl.ocx Persyaratan : - System : Pentium 166 atau yang lebih tinggi - Sistem Operasi : Windows 95/98/NT/ME/2000/XP - Video Card : SVGA 2MB is 16-bit Color Setting - Resolusi terbaik : 800 x 600 (Best of the best 1024 x 768 ) maaf untuk NT-2000-XP belum pernah saya coba :) - Memori : 16 Mb Ram atau yang lebih tinggi - Ukuran file : 464 Kb - Lisensi: Freeware (Tidak untuk dijual-belikan)

立即下载
zip文件
vmwaresvgaii.zip

虚拟机二代驱动 小文件,功能比较多,需求N和A卡驱动的别下载,适合修复系统驱动专用 仅需一积分

立即下载
7z文件
gc2145_parrotv1.1_r16m_验证完成_20170523_1408没有外层目录.7z

全志R16的android4.4.2平台点亮gc2145（evb30） 版本：V1.1 1、配置ov2640在android层配置的分辨率为vga（预览/拍照/录像） 注意：系统自带的快拍APP就在这里查找分辨率参数发送到camera的HAL层。 这里得分辨率设置为：拍照1600x1200，预览640x480 驱动里面搜索可以设置为：1600x1200, 1280x720（花屏）, 800x600（分辨率不能切换到这里）, 640x480 提取分辨率的小知识： R:\wyb\gc2145_parrotv1.1_r16m\lichee\linux-3.4\drivers\media\video\sunxi-vfe\device\gc2145.c 搜索：_regs[] static struct regval_list sensor_default_regs[] = { （默认分辨率是VGA分辨率：640x480） /* 1600X1200 UXGA capture */ static struct regval_list sensor_uxga_regs[] ={ /* 800X600 SVGA,30fps*/ static struct regval_list sensor_svga_regs[] = //1280*720---init---/// static struct regval_list gc2145_hd720_regs[] = { R:\wyb\gc2145_parrotv1.1_r16m\android\device\softwinner\astar-evb30\configs\camera.cfg ;------------------------------------------------------------------------------- ; 用于camera的配置 ; ; 采用格式: ; key = key_value ; 注意: 每个key需要顶格写; ; key_value紧跟着key后面的等号后面, 位于同一行中; ; key_value限制大小为256字节以内; ; ;------------------------------------------------------------------------------- ;------------------------------------------------------------------------------- ; exif information of "make" and "model" ;------------------------------------------------------------------------------- key_camera_exif_make = MAKE_A31S key_camera_exif_model = MODEL_A31ST ;------------------------------------------------------------------------------- ; 1 for single camera, 2 for double camera ;------------------------------------------------------------------------------- number_of_camera = 1 ;------------------------------------------------------------------------------- ; CAMERA_FACING_BACK ; gc0307 gc2145 ;------------------------------------------------------------------------------- camera_id = 0 ;------------------------------------------------------------------------------- ; 1 for CAMERA_FACING_FRONT ; 0 for CAMERA_FACING_BACK ;------------------------------------------------------------------------------- camera_facing = 0 ;------------------------------------------------------------------------------- ; 1 for camera without isp(using built-in isp of Axx) ; 0 for camera with isp ;------------------------------------------------------------------------------- use_builtin_isp = 0 ;------------------------------------------------------------------------------- ; camera orientation (0, 90, 180, 270) ;------------------------------------------------------------------------------- camera_orientation = 90 ;------------------------------------------------------------------------------- ; driver device name ;------------------------------------------------------------------------------- camera_device = /dev/video0 ;------------------------------------------------------------------------------- ; device id ; for two camera devices with one CSI ;------------------------------------------------------------------------------- device_id = 0 used_preview_size = 1 key_support_preview_size = 640x480 key_default_preview_size = 640x480 used_picture_size = 1 ;key_support_picture_size = 1600x1200, 1280x720, 800x600, 640x480 key_support_picture_size = 1600x1200, 640x480 key_default_picture_size = 640x480 used_flash_mode = 0 key_support_flash_mode = on,off,auto key_default_flash_mode = on used_color_effect=0 key_support_color_effect = none,mono,negative,sepia,aqua key_default_color_effect = none used_frame_rate = 1 key_support_frame_rate = 10 key_default_frame_rate = 10 used_focus_mode = 0 key_support_focus_mode = auto,infinity,macro,fixed,continuous-video,continuous-picture key_default_focus_mode = auto used_scene_mode = 0 key_support_scene_mode = auto,portrait,landscape,night,night-portrait,theatre,beach,snow,sunset,steadyphoto,fireworks,sports,party,candlelight,barcode key_default_scene_mode = auto used_white_balance = 0 key_support_white_balance = auto,incandescent,fluorescent,warm-fluorescent,daylight,cloudy-daylight key_default_white_balance = auto used_exposure_compensation = 1 key_max_exposure_compensation = 3 key_min_exposure_compensation = -3 key_step_exposure_compensation = 1 key_default_exposure_compensation = 0 2、在init.rc（init.sun8i.rc）中加载gc2145.ko这个驱动模块。 R:\wyb\gc2145_parrotv1.1_r16m\android\device\softwinner\astar-evb30\init.sun8i.rc #csi module insmod /system/vendor/modules/videobuf-core.ko insmod /system/vendor/modules/videobuf-dma-contig.ko insmod /system/vendor/modules/cam_detect.ko #insmod /system/vendor/modules/actuator.ko #insmod /system/vendor/modules/ad5820_act.ko insmod /system/vendor/modules/cci.ko insmod /system/vendor/modules/vfe_os.ko insmod /system/vendor/modules/vfe_subdev.ko #insmod /system/vendor/modules/gc0307.ko #insmod /system/vendor/modules/gc0308.ko #insmod /system/vendor/modules/ov2035.ko #insmod /system/vendor/modules/ov2640.ko #insmod /system/vendor/modules/ov5640.ko insmod /system/vendor/modules/gc2145.ko insmod /system/vendor/modules/vfe_v4l2.ko 启动之后实际加载的摄像头的驱动模块： shell@astar-evb30:/ $ shell@astar-evb30:/ $ lsmod gt82x 9849 0 - Live 0x00000000 sunxi_schw 12559 0 - Live 0x00000000 (O) rtl8150 9023 0 - Live 0x00000000 sunxi_keyboard 3021 0 - Live 0x00000000 sw_device 13916 0 - Live 0x00000000 uvcvideo 61212 0 - Live 0x00000000 videobuf2_vmalloc 2600 1 uvcvideo, Live 0x00000000 videobuf2_memops 2366 1 videobuf2_vmalloc, Live 0x00000000 videobuf2_core 18902 1 uvcvideo, Live 0x00000000 vfe_v4l2 445492 1 - Live 0x00000000 gc2145 12782 0 - Live 0x00000000 vfe_subdev 4523 2 vfe_v4l2,gc2145, Live 0x00000000 vfe_os 3951 2 vfe_v4l2,vfe_subdev, Live 0x00000000 cci 21775 2 vfe_v4l2,gc2145, Live 0x00000000 videobuf_dma_contig 5567 1 vfe_v4l2, Live 0x00000000 videobuf_core 16520 2 vfe_v4l2,videobuf_dma_contig, Live 0x00000000 bcm_btlpm 7442 0 - Live 0x00000000 bcmdhd 629907 0 - Live 0x00000000 mali 210546 20 - Live 0x00000000 (O) lcd 41263 0 - Live 0x00000000 disp 992816 8 mali,lcd, Live 0x00000000 nand 282782 0 - Live 0x00000000 (O) shell@astar-evb30:/ $ 3、（可选操作）没有/dev/video1，只有/dev/video0 R:\wyb\gc2145_parrotv1.1_r16m\android\device\softwinner\astar-evb30\ueventd.sun8i.rc /dev/video0 0666 media media #/dev/video1 0666 media media 4、驱动程序：gc2145.c及其V4L2的适配层。 配置gc2145.c的编译选项，只需要修改device目录中的Makefile打开gc2145即可： R:\wyb\gc2145_parrotv1.1_r16m\lichee\linux-3.4\drivers\media\video\sunxi-vfe\device\gc2145.c （请严重注意，全志R16的parrotv1.1/android4.4.2的SDK里面是没有，只有android6.0下有） R:\wyb\gc2145_parrotv1.1_r16m\lichee\linux-3.4\drivers\media\video\sunxi-vfe\device\Makefile obj-m += gc2145.o obj-m += gc2155.o （这两个不用修改：） R:\wyb\test_ov2640_r16\lichee\linux-3.4\drivers\media\video\sunxi-vfe\Kconfig R:\wyb\test_ov2640_r16\lichee\linux-3.4\drivers\media\video\sunxi-vfe\Makefile R:\wyb\gc2145_parrotv1.1_r16m\lichee\linux-3.4\drivers\media\video\sunxi-vfe\sensor_info.c struct sensor_item sensor_list_t[] = { // name i2c_addr sensor type sensor size sensor max pclk （请参照OV2640/GC2155配置） { "gc2145" , 0x78, SENSOR_YUV , PIXEL_NUM_2M , CORE_CLK_RATE_FOR_2M}, { "ov2640" , 0x60, SENSOR_YUV , PIXEL_NUM_2M , CORE_CLK_RATE_FOR_2M}, …… }; 5、 R:\wyb\gc2145_parrotv1.1_r16m\lichee\tools\pack\chips\sun8iw5p1\configs\evb-30\sys_config.fex [power_sply] dcdc1_vol = 3000 dcdc2_vol = 1100 dcdc3_vol = 1200 dcdc4_vol = 0 dcdc5_vol = 1500 aldo2_vol = 2500 aldo3_vol = 3000 dldo3_vol = 3300 eldo1_vol = 2800 eldo2_vol = 1800 eldo3_vol = 1800 ;gldo1_vol = 3300 ldoio0_vol = 2800 ldoio1_vol = 3300 ;-------------------------------------------------------------------------------- ;vip (video input port) configuration ;vip_used: 0:disable 1:enable ;vip_mode: 0:sample one interface to one buffer 1:sample two interface to one buffer ;vip_dev_qty: The quantity of devices linked to capture bus ; ;vip_define_sensor_list: If you want use sensor detect function, please set vip_define_sensor_list = 1, and ; verify that file /system/etc/hawkview/sensor_list_cfg.ini is properly configured! ; ;vip_dev(x)_pos: sensor position, "rear" or "front", if vip_define_sensor_list = 1,vip_dev(x)_pos must be configured! ; ;vip_dev(x)_isp_used 0:not use isp 1:use isp ;vip_dev(x)_fmt: 0:yuv 1:bayer raw rgb ;vip_dev(x)_stby_mode: 0:not shut down power at standby 1:shut down power at standby ;vip_dev(x)_vflip: flip in vertical direction 0:disable 1:enable ;vip_dev(x)_hflip: flip in horizontal direction 0:disable 1:enable ;vip_dev(x)_iovdd: camera module io power handle string, pmu power supply ;vip_dev(x)_iovdd_vol: camera module io power voltage, pmu power supply ;vip_dev(x)_avdd: camera module analog power handle string, pmu power supply ;vip_dev(x)_avdd_vol: camera module analog power voltage, pmu power supply ;vip_dev(x)_dvdd: camera module core power handle string, pmu power supply ;vip_dev(x)_dvdd_vol: camera module core power voltage, pmu power supply ;vip_dev(x)_afvdd: camera module vcm power handle string, pmu power supply ;vip_dev(x)_afvdd_vol: camera module vcm power voltage, pmu power supply ;x indicates the index of the devices which are linked to the same capture bus ;fill voltage in uV, e.g. iovdd = 2.8V, vip_devx_iovdd_vol = 2800000 ;fill handle string as below: ;axp22_eldo3 ;axp22_dldo4 ;axp22_eldo2 ;fill handle string "" when not using any pmu power supply ;-------------------------------------------------------------------------------- [csi0] vip_used = 1 vip_mode = 0 vip_dev_qty = 1 vip_define_sensor_list = 0 vip_csi_pck = port:PE00<2> vip_csi_mck = port:PE01<2> vip_csi_hsync = port:PE02<2> vip_csi_vsync = port:PE03<2> vip_csi_d0 = port:PE04<2> vip_csi_d1 = port:PE05<2> vip_csi_d2 = port:PE06<2> vip_csi_d3 = port:PE07<2> vip_csi_d4 = port:PE08<2> vip_csi_d5 = port:PE09<2> vip_csi_d6 = port:PE10<2> vip_csi_d7 = port:PE11<2> vip_csi_sck = port:PE12<2> vip_csi_sda = port:PE13<2> vip_dev0_mname = "gc2145" vip_dev0_pos = "rear" vip_dev0_lane = 1 vip_dev0_twi_id = 2 vip_dev0_twi_addr = 0x78 vip_dev0_isp_used = 0 vip_dev0_fmt = 0 vip_dev0_stby_mode = 0 vip_dev0_vflip = 0 vip_dev0_hflip = 0 vip_dev0_iovdd = "" vip_dev0_iovdd_vol = 2800000 vip_dev0_avdd = "axp22_ldoio0" vip_dev0_avdd_vol = 2800000 vip_dev0_dvdd = "axp22_ldoio1" vip_dev0_dvdd_vol = 1800000 vip_dev0_afvdd = "" vip_dev0_afvdd_vol = 2800000 vip_dev0_power_en = vip_dev0_reset = port:PE14<1><0> vip_dev0_pwdn = port:PE15<1><1> vip_dev0_flash_en = vip_dev0_flash_mode = vip_dev0_af_pwdn = （可选配置：） ;---------------------------------------------------------------------------------- ;usb configuration ;usb_used: usb controller enable, 0-disable, 1-enable ;usb_port_type: usb mode: 0-device, 1-host, 2-otg ;usb_detect_type: usb hotplug detect mode, 0-none, 1-vbus/id detect, 2-id/dpdm detect ;usb_id_gpio: usb id detect IO ;usb_det_vbus_gpio: usb vbus detect IO, "axp_ctrl" for axp ;usb_drv_vbus_gpio: usb dirve vbus IO ;usb_restrict_gpio: usb current restrict IO ;usb_restric_flag: usb current restrict flag ;---------------------------------------------------------------------------------- [usbc0] usb_used = 1 usb_port_type = 0 power_start = 3 6、开发板上摄像头的I2C挂载在TWI2上面了，逻辑是需要打开的（但是不打开也能够用，很奇怪！）： ;---------------------------------------------------------------------------------- ;i2c configuration ; twi_used = twix enable ;---------------------------------------------------------------------------------- [twi0] twi_used = 1 twi_scl = port:PH02<2> twi_sda = port:PH03<2> [twi1] twi_used = 1 twi_scl = port:PH04<2> twi_sda = port:PH05<2> [twi2] twi_used = 0 twi_scl = port:PE12<3> twi_sda = port:PE13<3> 直接配置摄像头的I2C了： vip_csi_sck = port:PE12<2> vip_csi_sda = port:PE13<2> 不过奇怪的是，摄像头并没有向其它平台那样生成设备节点： shell@astar-evb30:/ $ shell@astar-evb30:/ $ cd /sys/class/i2c-adapter shell@astar-evb30:/sys/class/i2c-adapter $ shell@astar-evb30:/sys/class/i2c-adapter $ shell@astar-evb30:/sys/class/i2c-adapter $ ll lrwxrwxrwx root root 1970-01-01 08:00 i2c-0 -> ../../devices/platform/twi.0/i2c-0 lrwxrwxrwx root root 1970-01-01 08:00 i2c-1 -> ../../devices/platform/twi.1/i2c-1 shell@astar-evb30:/sys/class/i2c-adapter $ 可能是全志R16的驱动程序不太规范吧！没有通过i2c_detect来注册2-003C这个节点。 直接在驱动程序中读取I2C，还是对的。0xF0/0xF1 device ID = 0x2145。 #define V4L2_IDENT_SENSOR 0x2145 /* * The gc2145 sits on i2c with ID 0x78 */ #define I2C_ADDR 0x78 #define SENSOR_NAME "gc2145"

立即下载
rar文件
vmware显卡 VMware SVGA II

vmware显卡 驱动 vmware tools VMware SVGA II

立即下载
其他文档
z77xd3h_mod_nvme_18i.bin

ga-z77x-d3h mod BIOS F18i带nvme模块（主板版本ver1.1)，更新如下： Intel Legacy RAID for SATA 11.6.0.1702 to 13.1.0.2030 Intel UEFI RAID SataDriver 11.6.0.1702 to 13.1.0.2030 Atheros PCIE Ethernet Controller 2.0.2.7 to 2.0.6.6 Atheros PCIE Ethernet Controller 2.1.1.1 to 2.1.1.5 Marvell 88SE91xx Adapter BIOS 1.0.0.0027 to 1.0.1.0025 Intel PCI Accelerated SVGA BIOS 2158 to 2170 Intel Sandy GOPdriver 2.0.1023 to 2.0.1024 Intel Ivy GOPdriver 3.0.1023 to 3.0.1027 CPU MicroCode Pack (with Sandy 6A728 and Ivy 6A919) ME firmware 8.1.30.1350 to 8.1.51.1471 Modified splash logo 2 nvme driver 自己动手制作，并亲自刷机测试，只要主板型号和版本一致的可以放心刷机！这是用来给老的z77主板上最新的pci转nvme盘用的，老机器再折腾一把，可以大幅提高硬盘性能！ 技嘉的主板有双bios，所以不怕刷坏，自己在制作过程中也有刷黑现象，我这块主板最简单的方法是按住reset键不松开，再按电源开机键，直到电脑启动后再自动关机，这时松开reset键，再按电源开机键开机，系统就会提示主bios损坏，进行备份bios刷回覆盖复活。

立即下载
rar文件
VMware SVGA II 虚拟机显卡

VMware SVGA II 虚拟机显卡,VMware SVGA II 虚拟机显卡

立即下载
其他文档
VMX_SVGA.SYS

VMX_SVGA.SYS

立即下载
rar文件
VMwareSVGAII虚拟机的显示驱动集成本驱动

VMwareSVGAII虚拟机的显示驱动集成本驱动，可以给虚拟机安装显卡驱动！

立即下载
rar文件
svga64k.rar_BGI_SVGA64K.BGI_Svga64k_TC2.0

TC2.0下需要显示24位真彩的BGI文件，哈哈哈，还可以

立即下载
rar文件
svga_drm_public.rar_Hold_hold enable

A structure to hold the enable status of experimental sync features.

立即下载
rar文件
vmware svga ii all

vmware svga ii and tools 需要的亲们不要犹豫

立即下载
其他文档
VMware SVGA 3D.iso

vmware的vmware svga 3d驱动，适用于win8早期预览版、win7、vista、部分longhorn

立即下载
7z文件
gc2035_parrotv1.1_验证完成_vga+uxga_hd720p正常_svga_20171011_1725没有外层目录.7z

20161114全志R16配置为前ov5640后UVC的双摄像头 1、 Z:\home\wwt\uvc_r16_project\android\device\softwinner\astar-evb20\configs\camera.cfg 修改： number_of_camera = 1 为： number_of_camera = 2 如果不改这里，兄弟，你在camera这个APP里面是绝对看不到前后摄像头的切换选项的！！！！^_ 修改ov5640的分辨率： used_preview_size = 1 key_support_preview_size = 640x480 key_default_preview_size = 640x480 used_picture_size = 1 key_support_picture_size = 640x480 key_default_picture_size = 640x480 为（根据你驱动里面的摄像头的寄存器配置分辨率而实际修改）： used_preview_size = 1 key_support_preview_size = 2592x1936, 2048x1536, 1600x1200, 1280x960, 1280x960, 1024x768, 1920x1080 ,1280x720, 800x600, 640x480 key_default_preview_size = 640x480 used_picture_size = 1 key_support_picture_size = 2592x1936, 2048x1536, 1600x1200, 1280x960, 1280x960, 1024x768, 1920x1080 ,1280x720, 800x600, 640x480 key_default_picture_size = 640x480 2、 Z:\home\wwt\uvc_r16_project\android\device\softwinner\astar-evb20\astar_evb20.mk #include device/softwinner/polaris-common/prebuild/google/products/gms_minimal.mk 注释掉这里干掉Google Play。可以不改。 3、这里讲UVC配置为模块了，请注意UVC所需要的模块的加载顺序。 Z:\home\wwt\uvc_r16_project\android\device\softwinner\astar-evb20\init.sun8i.rc 默认为： #csi module insmod /system/vendor/modules/videobuf-core.ko insmod /system/vendor/modules/videobuf-dma-contig.ko insmod /system/vendor/modules/cam_detect.ko # insmod /system/vendor/modules/actuator.ko # insmod /system/vendor/modules/ad5820_act.ko insmod /system/vendor/modules/cci.ko insmod /system/vendor/modules/vfe_os.ko insmod /system/vendor/modules/vfe_subdev.ko insmod /system/vendor/modules/gc0307.ko # insmod /system/vendor/modules/ov2035.ko insmod /system/vendor/modules/vfe_v4l2.ko 修改为： #csi module # /dev/video0 ov5640 insmod /system/vendor/modules/videobuf-core.ko insmod /system/vendor/modules/videobuf-dma-contig.ko #insmod /system/vendor/modules/cam_detect.ko insmod /system/vendor/modules/cci.ko insmod /system/vendor/modules/vfe_os.ko insmod /system/vendor/modules/vfe_subdev.ko insmod /system/vendor/modules/ov5640.ko insmod /system/vendor/modules/vfe_v4l2.ko # /dev/video1 uvc insmod /system/vendor/modules/videobuf2-core.ko insmod /system/vendor/modules/videobuf2-memops.ko insmod /system/vendor/modules/videobuf2-vmalloc.ko insmod /system/vendor/modules/uvcvideo.ko 4、 Z:\home\wwt\uvc_r16_project\lichee\tools\pack\chips\sun8iw5p1\configs\default\env.cfg 推荐修改： bootdelay=0 为： bootdelay=3 5、不用修改： Z:\home\wwt\uvc_r16_project\lichee\tools\pack\chips\sun8iw5p1\configs\evb-20\sys_config.fex ;-------------------------------------------------------------------------------- ;vip (video input port) configuration ;vip_used: 0:disable 1:enable ;vip_mode: 0:sample one interface to one buffer 1:sample two interface to one buffer ;vip_dev_qty: The quantity of devices linked to capture bus ; ;vip_define_sensor_list: If you want use sensor detect function, please set vip_define_sensor_list = 1, and ; verify that file /system/etc/hawkview/sensor_list_cfg.ini is properly configured! ; ;vip_dev(x)_pos: sensor position, "rear" or "front", if vip_define_sensor_list = 1,vip_dev(x)_pos must be configured! ; ;vip_dev(x)_isp_used 0:not use isp 1:use isp ;vip_dev(x)_fmt: 0:yuv 1:bayer raw rgb ;vip_dev(x)_stby_mode: 0:not shut down power at standby 1:shut down power at standby ;vip_dev(x)_vflip: flip in vertical direction 0:disable 1:enable ;vip_dev(x)_hflip: flip in horizontal direction 0:disable 1:enable ;vip_dev(x)_iovdd: camera module io power handle string, pmu power supply ;vip_dev(x)_iovdd_vol: camera module io power voltage, pmu power supply ;vip_dev(x)_avdd: camera module analog power handle string, pmu power supply ;vip_dev(x)_avdd_vol: camera module analog power voltage, pmu power supply ;vip_dev(x)_dvdd: camera module core power handle string, pmu power supply ;vip_dev(x)_dvdd_vol: camera module core power voltage, pmu power supply ;vip_dev(x)_afvdd: camera module vcm power handle string, pmu power supply ;vip_dev(x)_afvdd_vol: camera module vcm power voltage, pmu power supply ;x indicates the index of the devices which are linked to the same capture bus ;fill voltage in uV, e.g. iovdd = 2.8V, vip_devx_iovdd_vol = 2800000 ;fill handle string as below: ;axp22_eldo3 ;axp22_dldo4 ;axp22_eldo2 ;fill handle string "" when not using any pmu power supply ;-------------------------------------------------------------------------------- [csi0] vip_used = 1 vip_mode = 0 vip_dev_qty = 2 vip_define_sensor_list = 0 vip_csi_pck = port:PE00<2> vip_csi_mck = port:PE01<2> vip_csi_hsync = port:PE02<2> vip_csi_vsync = port:PE03<2> vip_csi_d0 = port:PE04<2> vip_csi_d1 = port:PE05<2> vip_csi_d2 = port:PE06<2> vip_csi_d3 = port:PE07<2> vip_csi_d4 = port:PE08<2> vip_csi_d5 = port:PE09<2> vip_csi_d6 = port:PE10<2> vip_csi_d7 = port:PE11<2> vip_csi_sck = port:PE12<2> vip_csi_sda = port:PE13<2> vip_dev0_mname = "ov5640" vip_dev0_pos = "rear" vip_dev0_lane = 1 vip_dev0_twi_id = 2 vip_dev0_twi_addr = 0x78 vip_dev0_isp_used = 0 vip_dev0_fmt = 0 vip_dev0_stby_mode = 1 vip_dev0_vflip = 0 vip_dev0_hflip = 0 vip_dev0_iovdd = "axp22_dldo3" vip_dev0_iovdd_vol = 2800000 vip_dev0_avdd = "" vip_dev0_avdd_vol = 2800000 vip_dev0_dvdd = "" vip_dev0_dvdd_vol = 1800000 vip_dev0_afvdd = "" vip_dev0_afvdd_vol = 2800000 vip_dev0_power_en = vip_dev0_reset = port:PE14<1><0> vip_dev0_pwdn = port:PE15<1><1> vip_dev0_flash_en = vip_dev0_flash_mode = vip_dev0_af_pwdn = [usbc1] usb_used = 1 usb_drv_vbus_gpio = port:PD12<1><0><0> usb_restrict_gpio = usb_host_init_state = 1 usb_restric_flag = 0 usb_regulator_io = "nocare" usb_regulator_vol = 0 usb_not_suspend = 0 编译内核之后， rootroot@cm-System-Product-Name:/home/wwt/uvc_r16_project/lichee$ ./build.sh config Welcome to mkscript setup progress All available chips: 0. sun8iw5p1 Choice: 0 All available platforms: 0. android 1. dragonboard 2. linux 3. tina Choice: 0 All available kernel: 0. linux-3.4 Choice: 0 All available boards: 0. bell-one 1. evb 2. evb-20 3. evb-rtl8723bs 4. sc3813r Choice: 2 rootroot@cm-System-Product-Name:/home/wwt/uvc_r16_project/lichee$ ./build.sh 配置USB摄像头为模块（也可以选择*直接编译进内核）： rootroot@cm-System-Product-Name:/home/wwt/uvc_r16_project/lichee$ cd linux-3.4/ rootroot@cm-System-Product-Name:/home/wwt/uvc_r16_project/lichee/linux-3.4$ make ARCH=arm menuconfig Device Drivers ---> <*> Multimedia support ---> [*] Video capture adapters ---> 修改： [ ] V4L USB devices ---> 为： [*] V4L USB devices ---> 修改： < > USB Video Class (UVC) (NEW) 为 USB Video Class (UVC) rootroot@cm-System-Product-Name:/home/wwt/uvc_r16_project/lichee$ cd linux-3.4/ rootroot@cm-System-Product-Name:/home/wwt/uvc_r16_project/lichee/linux-3.4$ cd .. rootroot@cm-System-Product-Name:/home/wwt/uvc_r16_project/lichee$ rootroot@cm-System-Product-Name:/home/wwt/uvc_r16_project/lichee$ ./build.sh rootroot@cm-System-Product-Name:/home/wwt/uvc_r16_project/lichee$ cd ../android/ rootroot@cm-System-Product-Name:/home/wwt/uvc_r16_project/android$ source build/envsetup.sh including device/softwinner/bellone-sc3813r/vendorsetup.sh including device/softwinner/astar-evb20/vendorsetup.sh including device/softwinner/r16-bell-one/vendorsetup.sh including device/softwinner/astar-evb/vendorsetup.sh including device/softwinner/polaris-common/vendorsetup.sh including device/lge/mako/vendorsetup.sh including device/lge/hammerhead/vendorsetup.sh including device/samsung/manta/vendorsetup.sh including device/generic/x86/vendorsetup.sh including device/generic/mips/vendorsetup.sh including device/generic/armv7-a-neon/vendorsetup.sh including device/asus/tilapia/vendorsetup.sh including device/asus/deb/vendorsetup.sh including device/asus/grouper/vendorsetup.sh including device/asus/flo/vendorsetup.sh including sdk/bash_completion/adb.bash rootroot@cm-System-Product-Name:/home/wwt/uvc_r16_project/android$ lunch You're building on Linux Lunch menu... pick a combo: 1. aosp_arm-eng 2. aosp_x86-eng 3. aosp_mips-eng 4. vbox_x86-eng 5. bellone_sc3813r-eng 6. astar_evb20-eng 7. r16_bell_one-eng 8. astar_evb-eng 9. aosp_mako-userdebug 10. aosp_hammerhead-userdebug 11. aosp_manta-userdebug 12. mini_x86-userdebug 13. mini_mips-userdebug 14. mini_armv7a_neon-userdebug 15. aosp_tilapia-userdebug 16. aosp_deb-userdebug 17. aosp_grouper-userdebug 18. aosp_flo-userdebug Which would you like? [aosp_arm-eng] 6 ============================================ PLATFORM_VERSION_CODENAME=REL PLATFORM_VERSION=4.4.2 TARGET_PRODUCT=astar_evb20 TARGET_BUILD_VARIANT=eng TARGET_BUILD_TYPE=release TARGET_BUILD_APPS= TARGET_ARCH=arm TARGET_ARCH_VARIANT=armv7-a-neon TARGET_CPU_VARIANT=cortex-a7 HOST_ARCH=x86 HOST_OS=linux HOST_OS_EXTRA=Linux-3.13.0-24-generic-x86_64-with-Ubuntu-14.04-trusty HOST_BUILD_TYPE=release BUILD_ID=KVT49L OUT_DIR=out ============================================ rootroot@cm-System-Product-Name:/home/wwt/uvc_r16_project/android$ extract-bsp rootroot@cm-System-Product-Name:/home/wwt/uvc_r16_project/android$ make -j12 rootroot@cm-System-Product-Name:/home/wwt/uvc_r16_project/android$ pack 编译好系统之后，刷机之后请注意先让开发板的Android4.4启动完成之后再插入USB摄像头。 全志R16的android4.4启动之后再插入USB摄像头。 这个配置就可以设置 ov5640为后置摄像头：/dev/video0 UVC为前置摄像头：/dev/video1 如果接上USB摄像头再启动，android是被： ov5640为前置摄像头，有设备节点/dev/video1，打开失败。 UVC为后置摄像头：/dev/video0 原因未知。 参考资料： http://blog.csdn.net/u010257920/article/details/49925807 A20 linux(dragonboard)同时使用Parallel CSI Camera及UVC http://blog.csdn.net/guoyihoney/article/details/46966603 A20平台增加camera http://blog.csdn.net/it_fish_man/article/details/17395469 Android usb camera设备添加 http://blog.csdn.net/zmnqazqaz/article/details/49535531 RK3288 uvc摄像头调试 http://blog.csdn.net/edsam49/article/details/8886543 USB Camera在android车机上应用前景及初试小结

立即下载
zip文件
社交直播svga动画资源文件包座驾礼物特效文件下载_svga文件.zip

社交直播svga动画资源文件包座驾礼物特效文件下载_svga文件.zip

立即下载
热门资源标签
上传资源赚钱
Global site tag (gtag.js) - Google Analytics