真麻烦,一个机器有4个7T的存储中有二个存储有问题,用fsck修复了三次,都没有反应。使用使用着就提示下面的出错
#dmesg
EXT3-fs error (device sdh1): ext3_journal_start_sb: Detected aborted journal
Remounting filesystem read-only
EXT3-fs error (device sdh1): ext3_lookup: unlinked inode 67584015 in dir #6758401
然后使用着那个挂的分区就变成只读read-only.
后来找到了e2fsck,还是蛮不错的。最少他能修复.
#umount /dev/sdg1
#e2fsck -y /dev/sdg1
e2fsck 1.39 (29-May-2006)
/data: recovering journal
/data contains a file system with errors, check forced.
Pass 1: Checking inodes, blocks, and sizes
Inode 286556161, i_size is 512000, should be 520192. Fix? yes
Inode 286556161, i_blocks is 984, should be 1024. Fix? yes
Pass 2: Checking directory structure
Entry ‘[M-fM-^IM-^QM-eM-^EM-^KM-gM-^NM-^KM-oM-<M-^MM-gM->M-^NM-eM-^FM-^[M-fM-4M-;M-fM-^MM-^IM-hM-^PM-(M-hM->M->M-eM-'M-^FM-eM-.M-^^M-eM-=M-^U].Ace.In.The.Hole.2005.DVDRip.XviD-LAJH.AC3.CD-1.avi’ in /mldonkey1/M-fM-^IM-^QM-eM-^EM-^KM-gM-^NM-^KM-oM-<M-^MM-gM->M-^NM-eM-^FM-^[M-fM-4M-;M-fM-^MM-^IM-hM-^PM-(M-hM->M->M-eM-’M-^FM-eM-.M-^^M-eM-=M-^U (820150293) has deleted/unused inode 820150302. Clear? yes
Problem in HTREE directory inode 286556161: node (122) has bad min hash
Problem in HTREE directory inode 286556161: node (122) referenced twice
Problem in HTREE directory inode 286556161: node (123) referenced twice
Problem in HTREE directory inode 286556161: node (124) referenced twice
Invalid HTREE directory inode 286556161 (/rss/xinhuanet/video/20092). Clear? yes
这样,但1T的文件大约需要1个小时。。。我花了6个小时才检查修复完6T .
象这样的文件系统坏,出现问题,要从二个方面入手,一个是软件,一个是硬件。
1.查看日志,dmesg和tail -f /var/log/messages
2.要看日志检查相关的内容和软硬件
3.还没有结果就google看看有没有人和你一样出现这个问题。看看别人是怎么处理。
4.换硬件。比如RAID卡之类。
分享到:
相关推荐
此文档描述了Detected memory leaks内存泄漏的简单检测方法,通过调用系统函数,在debug模式下运行,可以很快定位出内存泄漏之处;注:此方法并不能适用所有Detected memory leaks情况
压缩包内包含 ecj-4.6.2.jar 和 Util.class两个文件 使用说明: 1. 如果你的IDEA是2017.2.2版本,那么直接把ecj-4.6.2.jar放到你的IDEA安装目录下lib文件夹中替换原文件即可 2. 如果你是其他版本的IDEA,那么用压缩...
SQUASHFS 2.2 - A squashed read-only filesystem for Linux Copyright 2005 Phillip Lougher (phillip@lougher.demon.co.uk) Released under the GPL licence (version 2 or later). Welcome to Squashfs ...
运行UG提示Fatal error detected unable to continue的解决方法
开机提示USB-Device-over-current-status-Detected后关机1.doc
SQUASHFS 1.3r3 - A squashed read-only filesystem for Linux Copyright 2004 Phillip Lougher (phillip@lougher.demon.co.uk) Released under the GPL licence (version 2 or later). Squashfs is currently ...
centos7_XFS_报Corruption of in-memory data detected错误修复
转载至ST link官方链接 官方是免费下载的,因此不应该所需积分下载,这里动态调分设置为不允许 ...如果第二次打开Keil找不到STlink是系统安装的问题,重新安装这个setup安装包然后选择repair即可。
解决报错HEAP CORRUPTION DETECTED heap corruption detected after normal block.zip
码云 eclipse git remote: warning: Large files detected. 非命令方式解决方案。
对于ALLEGRO设计在出验证光绘文件阶段,在CAM350中导入光绘文件时经常有报错"Zero radius arc detected.Assuming linear interpolation",导致无法正常导入光绘文件。解决这个问题我是半猜半蒙,发生过几次这个问题,...
DELL 服务器系统错误解决方法 在 DELL 服务器系统中,可能会出现各种错误信息,影响服务器的稳定运行。以下是常见的错误信息及其解决方法: 1. Alert! iDRAC6 not responding. 解决方法:等待系统重新引导。如果...
USB Device Over Current Status Detected! System will Shut Down After 15 Second!这个应该是华硕主板的通病,一般都是跳线未设置好或USB电源短路造成的,提供一张维修方法,仅供参考。
debug时候出现NO ST-LINK Detected的错误提示,下了很多 ST-LINK驱动都不好用,这款好用,下载后点击ST-LINK_USB_V2_1_Driver文件夹下的stlink_winusb_install.bat进行安装即可
VC运行库安装程序(x86 x64 2005~2013)
2.读入网格时,error:File haswrong dimensions(2) 3.the use of axis boundary conditions is not appropriate for 2D/3D flow problem. 4.error:divergence detected in AMG solver 5.error:temperature ...
13-1、在axes显示图像后,在图像上单击鼠标时,回调函数的定义规则和使用方法 35 14、如何在循环中加入waitbar,并在waitbar上添加‘取消’按钮 36 15、在matlab中对信号进行FFT变换 38 16、动态显示figure中曲线的x...
今天启动项目,测试时,发现一个报错:Duplicate keys detected: ‘892834eb-a50c-488c-83ea-cc23f05e2875’. This may cause an update。具体如下: 问题:使用Element UI的Tree 树形控件出现问题。 上网查了一下...
It not only provides common funtions about serail communications, but also ;; provides USB serial port converter detecting/auto-connecting, when the USB ;; device changing is detected, the CDC serial...
在 Outlook 中,PST 文件可能会因为多种原因而损坏,例如 PST 文件大小限制、文件系统错误导致数据块丢失、使用 chkdsd 后文件损坏等。这种情况下,Outlook 会出现错误,例如“Errors have been detected in the ...