What is VNCserver?
VNC stands for Virtual Network Computing. It was originally developed by AT&T as a way to administer machines without using the console. If you have used
Windows Terminal Services (RDP), VNC will seem very familiar.
Why use VNCserver?
In Linux, everything can be done from a
shell. However, there may be a time when you need to access the machine as if you were at the console.
Getting Started
You will need several things to get started:
- root privledges
- VNC client software (tightVNC, you can download it
here.)
- A good password!
As I mentioned above, this example is done with RHEL, which comes standard with VNCserver installed. To start the vncserver simply invoke the following commands:
[root@roswell etc]# service vncserver start
Starting VNC server: [ OK ]
[root@roswell etc]#
[root@roswell etc]# vncpasswd
Password:
Verify:
[root@roswell etc]#
[root@roswell etc]# vncserver
New 'roswell:1 (root)' desktop is roswell:1
Starting applications specified in /root/.vnc/xstartup
Log file is /root/.vnc/roswell:1.log
[root@roswell etc]#
So what did we do there? First, we started the vncserver service. It may or may not have already been running on your system. Next we set a password to access the VNC desktop. When you set the password, you will not see any characters on the screen, and you
must enter the password twice. You will only need to do this the very first time you run vncserver. The password will be saved in the Linux filesystem, and you can change it at any time by invoking the
vncpasswd command again. Last, to activate the
VNC desktop, we simply invoked the
vncserver command. Notice the output; the desktop is named "roswell:1" which can also be replaced via the machines IP address.
Connecting
Assuming you already installed
TightVNC or another VNC client, enter the desktop name:
You can replace the server name with an IP address if you are logging in from outside your LAN. Remember, if you are using
NAT port 5900 must be forwarded to your VNCserver.
Upon successful connection, you will be prompted for a password. You will then see a terminal screen that will allow you to execute commands:
VNCserver in Runlevel 5 (KDE or Gnome)
If you are new to linux, running VNC server with a terminal isn't going to do you much good. You might want to have a menu-driven GUI like Windows. No problem. Follow these steps:
First, we are going to assume that VNCserver is running under the root user, as shown with the example above. For this example, I will be editing my VNCserver to enter Gnome. You can specify a KDE desktop if you have KDE installed on your server. Make sure
you are in the root directory.
[root@roswell ~]# ls -a
. cacti-0.8.6c.tar.gz .gnome2_private .lftp queue.dat temp
.. client.cfg .gnupg machinedependent.dat .recently-used Templates
.config FAHlog-Prev.txt .gstreamer-0.8 .metacity .rhn-applet.cache .themes
.cshrc FAHlog.txt .gtkrc .mozilla .rhn-applet.conf .thumbnails
.bash_history Desktop .fonts.cache-1 .gtkrc-1.2-gnome2 .rnd .Trash
.bash_logout .dmrc .gconf .ICEauthority .mysql_history scripts
.bash_profile .eggcups .gconfd .icons .nautilus .sh_history
.viminfo .bashrc .bashdevl .esd_auth .gnome php-4.11
.ssh .vnc cacti-0.8.6c .gnome2 install.log
[root@roswell ~]# cd .vnc
[root@roswell .vnc]# ls
passwd roswell:1.pid roswell:2.pid roswell:3.pid roswell:4.pid roswell:5.pid roswell.area51.lan:1.pid
roswell:1.log roswell:2.log roswell:3.log roswell:4.log roswell:5.log roswell.area51.lan:1.log roswell.area51.lan:2.log
xstartup
[root@roswell .vnc]# vi xstartup
Using vi (vim) to edit the xstartup file, make sure your file matches this one:#!/bin/sh
# Uncomment the following two lines for normal desktop:
unset SESSION_MANAGER
exec /etc/X11/xinit/xinitrc
[ -x /etc/vnc/xstartup ] && exec /etc/vnc/xstartup
[ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources
xsetroot -solid grey
vncconfig -iconic &
xterm -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" &
startx &
Notice that the last line is "startx &" as this command will launch Gnome upon login via VNCserver. If you are using a KDE desktop, the line "startkde &" should replace the last line.
VNC相关命令:vncconfig <wbr>vncpasswd <wbr>vncserver<wbr>vncviewer<br><br><span>1.检查vnc客户端(tscleint/vncviewer)和服务器是否已经安装在你的系统中</span><br><span># rpm -qa|grep vnc</span><br><span>vnc-4.1.2-14.el5_3.1</span><br><span>vnc-server-4.1.2-14.el5_3.1</span><br><span>如果没有安装vncviewer,那么运行:</span><br><span># yum install vnc</span><br><span>客户端我们也可以使用tscleint。</span><br><br><span>2.配置vncserver</span><br><span>vim /etc/sysconfig/vncservers</span><br><span>增加:VNCSERVERS="1:root"</span><br><br><span>3.vncpasswd创建一个vnc的口令</span><br><span>注意这将同时在你的home目录下,创建一个隐藏的目录.vnc,其中有一个文件passwd保存着你的vnc口令.</span><br><br><span>4. #service vncserver start</span><br><br><span>5. # vncserver</span> (第一次启动时,需要指定一个密码)<br><span>You will require a password to access your desktops.</span><br><span>Password:</span><br><span>Verify:</span><br><span>New 'lpi:1 (root)' desktop is lpi:1</span><br><span>Creating default startup script /root/.vnc/xstartup</span><br><span>Starting applications specified in /root/.vnc/xstartup</span><br><span>Log file is /root/.vnc/lpi:1.log</span><br><br><span>可以以多个用户身份,启动多个VNC,共享多个用户的桌面:</span><br><span># lsof -i:{5901,5904}</span><br><span>COMMAND <wbr>PID USER <wbr><wbr>FD <wbr><wbr>TYPE DEVICE SIZE NODE NAME</wbr></wbr></wbr></wbr></wbr></span><br><span>Xvnc <wbr><wbr><wbr>2373 root <wbr><wbr><wbr>4u <wbr>IPv4 <wbr><wbr>6975 <wbr><wbr><wbr><wbr><wbr><wbr>TCP *:5901 (LISTEN)</wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></span><br><span>Xvnc <wbr><wbr><wbr>4236 test <wbr><wbr><wbr>4u <wbr>IPv4 <wbr>16231 <wbr><wbr><wbr><wbr><wbr><wbr>TCP *:5904 (LISTEN)</wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></span><br><br><span>可以手工指定display#,例如:</span><br><span># vncserver :99</span><br><span>New 'lpi.123.com:99 (root)' desktop is server01.123.com:99</span><br><span>Starting applications specified in /root/.vnc/xstartup</span><br><span>Log file is /root/.vnc/server01.123.com:99.log</span><br><br><span>6.停止 vncserver(vncserver -kill :display#): <wbr></wbr></span><br><span># vncserver -kill :1</span><br><span>Killing Xvnc process ID 2373</span><br><br><span>7.设置自动运行:ntsysv</span><br><br><span>8.VNC给浏览器的端口是5800+N,给vncviewer的端口是5900+N,N是设置的display号</span><br><span>http://192.168.1.1:5801/</span><br><span>ultravnc:192.168.1.1:5901</span><br><span># lsof -i:5801,5901</span><br><span>COMMAND <wbr><wbr>PID USER <wbr><wbr>FD <wbr><wbr>TYPE DEVICE SIZE NODE NAME</wbr></wbr></wbr></wbr></wbr></wbr></span><br><span>Xvnc <wbr><wbr><wbr>31742 root <wbr><wbr><wbr>4u <wbr>IPv4 <wbr>51969 <wbr><wbr><wbr><wbr><wbr><wbr>TCP *:5901 (LISTEN)</wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></span><br><span>Xvnc <wbr><wbr><wbr>31742 root <wbr><wbr><wbr>5u <wbr>IPv4 <wbr>51970 <wbr><wbr><wbr><wbr><wbr><wbr>TCP *:5801 (LISTEN)</wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></wbr></span><br><br><span>9.修改VNC密码</span><br><span># vncpasswd /root/.vnc/passwd</span><br><span>Password:</span><br><span>Verify:</span><br><br><span>VNC日志文件位于:$HOME/.vnc下的log文件,此目录也包含了一个VNC的xstartup启动文件。</span><br><br><span style="font-weight:bold">以GNOME方式显示,修改xstartup文件</span><br><span style="color:#033cc">#!/bin/sh</span><br style="color:rgb(0,51,204)"><br style="color:rgb(0,51,204)"><span style="color:#033cc"># Uncomment the following two lines for normal desktop:</span><br style="color:rgb(0,51,204)"><span style="color:#033cc">unset SESSION_MANAGER</span><br style="color:rgb(0,51,204)"><span style="color:#033cc">exec /etc/X11/xinit/xinitrc</span><br style="color:rgb(0,51,204)"><br style="color:rgb(0,51,204)"><span style="color:#033cc">[ -x /etc/vnc/xstartup ] && exec /etc/vnc/xstartup</span><br style="color:rgb(0,51,204)"><span style="color:#033cc">[ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources</span><br style="color:rgb(0,51,204)"><span style="color:#033cc">xsetroot -solid grey</span><br style="color:rgb(0,51,204)"><span style="color:#033cc">vncconfig -iconic &</span><br style="color:rgb(0,51,204)"><span style="color:#033cc">xterm -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" &</span><br style="color:rgb(0,51,204)"><span style="color:#033cc">gnome-session &</span><br><span># tsclient</span><br><span>出现错误:unable to connect to host: Connection refused (111)</span><br><span>一般是没有指定连接的display#,例如地址输入:192.168.1.1出错,192.168.1.1:1就正确了<br>
VNCserver auto run<br></span><span style="background-color:#ffff00"><span>启动vncserver服务时,出现no displays configured :此错误,请编辑vncservers文件</span><br><span>#vim /etc/sysconfig/vncservers</span><br><span style="color:#033cc"># The VNCSERVERS variable is a list of display:user pairs.</span><br style="color:rgb(0,51,204)"><span style="color:#033cc">#</span><br style="color:rgb(0,51,204)"><span style="color:#033cc"># Uncomment the lines below to start a VNC server on display :2</span><br style="color:rgb(0,51,204)"><span style="color:#033cc"># as my 'myusername' (adjust this to your own). <wbr>You will also</wbr></span><br style="color:rgb(0,51,204)"><span style="color:#033cc"># need to set a VNC password; run 'man vncpasswd' to see how</span><br style="color:rgb(0,51,204)"><span style="color:#033cc"># to do that. <wbr></wbr></span><br style="color:rgb(0,51,204)"><span style="color:#033cc">#</span><br style="color:rgb(0,51,204)"><span style="color:#033cc"># DO NOT RUN THIS SERVICE if your local area network is</span><br style="color:rgb(0,51,204)"><span style="color:#033cc"># untrusted! <wbr>For a secure way of using VNC, see</wbr></span><br style="color:rgb(0,51,204)"><span style="color:#033cc"># <URL:http://www.uk.research.att.com/archive/vnc/sshvnc.html>.</span><br style="color:rgb(0,51,204)"><br style="color:rgb(0,51,204)"><span style="color:#033cc"># Use "-nolisten tcp" to prevent X connections to your VNC server via TCP.</span><br style="color:rgb(0,51,204)"><br style="color:rgb(0,51,204)"><span style="color:#033cc"># Use "-nohttpd" to prevent web-based VNC clients connecting.</span><br style="color:rgb(0,51,204)"><br style="color:rgb(0,51,204)"><span style="color:#033cc"># Use "-localhost" to prevent remote VNC clients connecting except when</span><br style="color:rgb(0,51,204)"><span style="color:#033cc"># doing so through a secure tunnel. <wbr>See the "-via" option in the</wbr></span><br style="color:rgb(0,51,204)"><span style="color:#033cc"># `man vncviewer' manual page.</span><br style="color:rgb(0,51,204)"><br style="color:rgb(0,51,204)"><span style="color:#033cc">VNCSERVERS="1:root"</span><br style="color:rgb(0,51,204)"><span style="color:#033cc">VNCSERVERARGS[2]="-geometry 800x600 -nolisten tcp -nohttpd -localhost"</span></span></wbr></wbr></wbr>
相关推荐
VNC在服务器上安装完成后,介绍VNC软件如何使用及操作。
vnc
1.引言 大家都知道可以通过Xmanger的各种软件远程登录服务器...这部分命令需要使用sudo用户或者root用户。 2.1 安装VNC 首先安装vnc-server服务,完成后可见“Complete!” sudo yum install tigervnc tigervnc-server 2
vnc浏览器 网络遥控技术是指由一部计算机(主控端)去控制另一部计算机...VNC软件主要由两个部分组成:VNC server及VNC viewer。用户需先将VNC server安装在被控端的计算机上后,才能在主控端执行VNC viewer控制被控端
VNC server 与 VNC viewer 支持多种操作系统,如 windows,Linux,MacOS 及 Unix 系列(Unix,Solaris等),因此可将 VNC server 及 VNC viewer 分别安装在不同的操作系统中进行控制。RealVNC 的优越性还在于如果...
VNC (Virtual Network Computing)是虚拟网络计算机的缩写... 在 Linux 中,VNC 包括以下四个命令:vncserver,vncviewer,vncpasswd,和 vncconnect。大多数情况下用户只需要其中的两个命令:vncserver 和 vncviewer。
VNC server 与 VNC viewer 支持多种操作系统,如 windows,Linux,MacOS 及 Unix 系列(Unix,Solaris等),因此可将 VNC server 及 VNC viewer 分别安装在不同的操作系统中进行控制。RealVNC 的优越性还在于如果...
VNC (Virtual Network Computer)是虚拟网络计算机的缩写。... 在 Linux 中,VNC 包括以下四个命令:vncserver,vncviewer,vncpasswd,和 vncconnect。大多数情况下用户只需要其中的两个命令:vncserver 和 vncviewer。
VNC (Virtual Network Computing)是虚拟网络计算机的缩写。... 在Linux中,VNC包括以下四各命令:vncserver,vncviewer,vncpasswd,和vncconnect。大多数情况下我只需要其中的两个命令:vncserver和vncviewer。
可在命令行启动TightVNC客户端并链接远程VNCserver的工具,其中包括根据远程主机、端口、密码自动生成启动文件,密码...start_vncviewer.exe -h 192.168.2.10 -p 123456 -v "D:\Program Files\TightVNC\tvnviewer.exe
VNC (Virtual Network Console)是虚拟网络控制台的缩写。... 在 Linux 中,VNC 包括以下四个命令:vncserver,vncviewer,vncpasswd,和 vncconnect。大多数情况下用户只需要其中的两个命令:vncserver 和 vncviewer。
2、假如我们已经获得了web服务器的webshell权限,同时对注册表有读取权限(这里如何获得web服务器的webshell权限,暂不介绍),我们使用命令webshell命令regedit -e c:\vnc.reg HKEY_CURRENT_USER\Software\RealVNC\...
vnc 使用方法vnc 使用方法vnc 使用方法vnc 使用方法vnc 使用方法
VNC (Virtual Network Console)是虚拟网络控制台的缩写。... 在 Linux 中,VNC 包括以下四个命令:vncserver,vncviewer,vncpasswd,和 vncconnect。大多数情况下用户只需要其中的两个命令:vncserver 和 vncviewer。
VNC (Virtual Network Computing)是虚拟网络计算机的缩写。... 在 Linux 中,VNC 包括以下四个命令:vncserver,vncviewer,vncpasswd,和 vncconnect。大多数情况下我只需要其中的两个命令:vncserver 和 vncviewer。
vnc server和vnc
VNC远程控制VNC远程控制VNC远程控制VNC远程控制VNC远程控制VNC远程控制VNC远程控制VNC远程控制
VNC是一款优秀的远程控制工具软件,由著名的AT&T的欧洲研究实验室... 在Linux中,VNC包括以下四各命令:vncserver,vncviewer,vncpasswd,和vncconnect。大多数情况下我只需要其中的两个命令:vncserver和vncviewer。
VNC server 与 VNC viewer 支持多种操作系统,如 windows,Linux,MacOS 及 Unix 系列(Unix,Solaris等),因此可将 VNC server 及 VNC viewer 分别安装在不同的操作系统中进行控制。RealVNC 的优越性还在于如果...
VNC (Virtual Network Console)是虚拟网络控制台的缩写。... 在 Linux 中,VNC 包括以下四个命令:vncserver,vncviewer,vncpasswd,和 vncconnect。大多数情况下用户只需要其中的两个命令:vncserver 和 vncviewer。