`
jiagou
  • 浏览: 2588970 次
文章分类
社区版块
存档分类
最新评论

Asterisk config sip.conf

 
阅读更多

Configuration file for Asterisk SIP channels, for both inbound and outbound calls. Starting with Asterisk v1.2.0: The global option "port" in 1.0.X that is used to set which port to bind to has been changed to "bindport" to be more consistent with the other channel drivers and to avoid confusion with the "port" option for users/peers. [tammari] type=friend callerid="Tuomas Tammisalo" <1000> username=tammari host=dynamic secret=******** regcontext=tammari-internal regexten=1005 dtmfmode=rfc2833 insecure=very canreinvite=yes nat=yes qualify=yes context=merus-sipphone pickupgroup=1 callgroup=1 mailbox=1000@default Asterisk as a SIP client In sip.conf under [general] add a register definition: Format: register => user[:secret[:authuser]]@host[:port][/extension] or register => fromuser@fromdomain:secret@host or register => fromuser@fromdomain:secret:authuser@host:port/extension See also: bug 14367 with a documentation fix for 1.6. If you have problems with your network connection going up and down (e.g. an unreliable cable connection) and you keep losing your sip registry, you may want to add registerattempts and registertimeout settings to the general section above the register definitions. Setting registerattempts=0 will force Asterisk to attempt to reregister until it can (the default is 10 tries). registertimeout sets the length of time in seconds between registration attempts (the default is 20 seconds). In case of DynDNS issues, for example with myasterisk.dyndns.org changing its IP, you might want to consider taking a look at ddclient to automate a "sip reload" in the CLI. P.S. Note for sipgate.co.uk users: /extension must be your sipgate number (this is not true; I am using "99" --jrc) - define one to accept this in your extensions.conf. An alternate port does not seem to work with sipgate.co.uk unless it is defined as the bindport in sip.conf without the [:port] syntax. Example: ; Register 2345@mysipprovider.com with authname 2345 at mysipprovider.com at sip provider as 1234 here: register => 2345:password@mysipprovider.com/1234 ; Register 1235@mysipprovider.com with authname 1235 and realm mysipprovider.com at proxyof.mysipprovider.com as s here. ; (as needed by budgetphone.nl): register => 1235@mysipprovider.com:password:1235@proxyof.mysipprovider.com •user is the user id for this SIP server (ex 2345) •authuser is the optional authorization user for the SIP server •secret is the user's password •host is the domain or host name for the SIP server. This SIP server needs a definition in a section of its own in SIP.conf (mysipprovider.com). •port send the register request to this port at host. Defaults to 5060 •/1234 is the Asterisk contact extension. 1234 is put into the contact header in the SIP Register message. The contact extension is used by remote SIP server when it needs to send a call to Asterisk. See the example below. The default context extension is "s". Agreed, it's not very good to have a lot of cleartext passwords in this text file, but that's how it works now. You only need to register if a) you want to be called, and b) you appear to the other side as having a dynamic IP address. Check the success of your own server's registrations at the CLI with "SIP SHOW REGISTRY", whereas you can obtain a list of clients that registered with your server with the help of "SIP SHOW PEERS". You may examine all details of a peer's registration with "SIP SHOW PEER ". Enter "HELP SIP" at the CLI for additional commands. The server definition for outgoing calls looks like this: [mysipprovider-out] type=peer secret=password username=2345 host=sipserver.mysipprovider.com fromuser=2345 fromdomain=fwd.pulver.com canreinvite=no insecure=very qualify=yes nat=yes context=from-mysipprovider ; this section will be defined in extensions.conf In extensions.conf you'd then use a statement like this: exten => _9.,1,Dial(SIP/${EXTEN:1}@mysipprovider-out,30,r) Please note that the ${EXTEN:1} variable here extracts all but the first characters from the current extension (the current match), in this case: 9 + the following digits. Refer to the Asterisk variables Substrings section for more details Here is the section(in extensions.conf) which routes calls from our sip provider to where we decide: [from-mysipprovider] exten => 1234,1,Answer ; 1234 is the contact extension, default contact extension is "s" exten => 1234,2,Dial(SIP/111,25,Ttr) ; incoming calls are redirected to SIP telephone with number 111 exten => 1234,3,Hangup -------------------------------------------------------------------------------- Another example [general] context = (own_context in extensions.conf where recive the call ) realm = real.com bindport=5060 srvlookup=yes disallow=all allow=ulaw allow=gsm language=en trustrpid = yes sendrpid = yes register => fromuser@fromdomain:secret@host register => XXXX@YYYY.com:AAAA@IP [my_provider] type=peer fromuser=XXXX fromdomain=YYYY.com canreinvite=no secret=AAAAA insecure=very host= IP disallow=all allow=gsm allow=ulaw allow=alaw qualify=yes nat=no Outbound call in extensions.conf exten => _X.,1,Dial(SIP/${EXTEN}@my_provider) SIP Configuration - general The [general] section of sip.conf includes the following variables: •allowsubscribe = yes|no : Allow or Ignore Subscribe requests •allow = : Allow codecs in order of preference (Use DISALLOW=ALL first, before allowing other codecs) •disallow = all : Disallow all codecs (global configuration) •Asterisk sip allowexternaldomains = yes|no : Enable/Disable INVITE and REFER to non-local domains. Default yes. (New in v1.2.x). •allowguest = yes|no : Allow or reject guest calls. Default is yes. (this can also be set to 'osp' if asterisk was compiled with OSP support). (New in v1.2.x). •Asterisk sip allowoverlap = yes|no : Enable/disable overlap dialing support. Default yes. •Autocreatepeer = yes|no : If set, anyone will be able to log in as a peer (with no check of credentials; useful for operation with SER). Default no. •Asterisk sip autodomain = yes|no : Enable/disable Asterisk's ability to add local hostnames and local IP address to the domain list. externip or externhost are also taken into the domain list. Default no. (New in v1.2.x). •bindaddr = IP_Address : IP Address to bind to (listen on). Default 0.0.0.0 (all network interfaces). •bindport = Number : UDP Port to bind to (listen on). Used to be port in Asterisk v1.0.x. Default 5060. •callerid = : Caller ID information used when nothing else is available. Defaults to asterisk. (The ability to override the default appears to available in Asterisk 1.0.9. Unsure about other versions.) •canreinvite = update|yes|no|nonat (global setting): For some reason this defaults to yes, so beware... •Asterisk sip checkmwi = Number : Global interval (in seconds) between mailbox checks. Default 10 seconds. (New in v1.2.x) •Asterisk sip compactheaders = yes|no : Indicates Asterisk should send compact (i.e. abbreviated) headers in the SIP messages. Default no. (New in v1.2.x) •context = : This is the default context and is used when a endpoint has no context property. The context in section of an endpoint is used to route calls from that endpoint to the wanted destination. The context body is located in extensions.conf. •defaultexpiry= Number : Default duration (in seconds) of incoming/outgoing registration. Default 120 seconds. •domain = domains : Comma separated list of domains which Asterisk is responsible for. (New in Asterisk 1.2.x) •dtmfmode = inband|info|rfc2833 (global setting). Default rfc2833. Warning: inband very high CPU load. •dumphistory = yes|no : Enable support for dumping of SIP conversation's transaction history to LOG_DEBUG. Default no. (New in v1.2.x) •externip = IP_Address or a hostname : Address that we're going to put in SIP messages if we're behind a NAT. If a hostname is used as the value, then the IP address associated with the hostname is looked up only once during the reading of the sip.conf. If you want support for a hostname associated with a dynamic IP address, use Asterisk sip externhost. •externhost = hostname.tld : (New in Asterisk 1.2.x) •externrefresh = Number : Specify how often (in seconds) a hostname DNS lookup should be performed for the value entered in 'externhost'. Default 10 seconds. (New in Asterisk 1.2.x). •ignoreregexpire = yes|no : Indicates whether to use Contact information about a peer even if the information is stale because it has reached its expiration time. Default no. (New in v1.2.x) •jbenable = yes|no : Enables the use of a jitterbuffer on the receiving side of a SIP channel. (Added in Version 1.4) •jbforce = yes|no : Forces the use of a jitterbuffer on the receive side of a SIP channel. Defaults to "no". (Added in Version 1.4) •jbmaxsize = Number : Max length of the jitterbuffer in milliseconds. (Added in Version 1.4) •jbresyncthreshold = Number : Jump in the frame timestamps over which the jitterbuffer is resynchronized. Useful to improve the quality of the voice, with big jumps in/broken timestamps, usually sent from exotic devices and programs. Defaults to 1000. (Added in Version 1.4) •jbimpl = fixed|adaptive: Jitterbuffer implementation, used on the receiving side of a SIP channel. Two implementations are currently available - "fixed" (with size always equals to jbmaxsize) and "adaptive" (with variable size, actually the new jb of IAX2). Defaults to fixed. (Added in Version 1.4) •jblog = no|yes: Enables jitterbuffer frame logging. Defaults to "no". (Added in Version 1.4) •language = : Default language used by any Playback()/Background(). •limitonpeers = yes|no: If set to yes use only the peer call counter for both incoming and outgoing calls (ref. hints, subscriptions, BLF; added in 1.4) •localnet = NetAddress/Netmask : local network and mask. •fromdomain= : Sets default From: domain in SIP messages when acting as a SIP ua (client) •insecure = very|yes|no|invite|port : Specifies how to handle connections with peers. Default no (authenticate all connections). (invite and port added in v1.2.x). •maxexpirey = Number : Max duration (in seconds) of incoming registration we allow. Default 3600 seconds. •musicclass = one of the classes specified in musiconhold.conf •musdiconhold = same as musicclass •nat = yes|no : Please note that as of Asterisk 1.0.x nat can now have the values: yes|no|never|route. Default no which really means to use rfc3581 techniques. •notifymimetype = mediatype/subtype : Allow overriding of mime type in MWI NOTIFY used in voicemail online messages. Valid MIME types can be found here. Default application/simple-message-summary. (New in v1.2.x). •notifyringing = yes|no : Notify subscription on RINGING state. Default yes. (New in v1.2.x). •outboundproxy = IP_address or DNS SRV name (excluding the _sip._udp prefix) : SRV name, hostname, or IP address of the outbound SIP Proxy. (New in v1.2.x). •outboundproxyport = Number : UDP port number for the Outbound SIP Proxy. (New in v1.2.x). •pedantic = yes|no : Enable slow, pedantic checking of Call-ID:s, multiline SIP headers and URI-encoded headers. Default no. •port = : Default SIP port of peer. (this is not the port for Asterisk to listen. See bindport). •progressinband = never|no|yes : If we should generate in-band ringing always. Default never. •promiscredir= yes|no : Allows support for 302 Redirects; (Note: will redirect them all to the local extension returned in Contact rather than to that extension at the destination). Default no. •qualify = yes|no|milliseconds : Check if client is reachable. If yes, the checks occur every 60 seconds. Default no. •realm = my realm (Change authentication realm from asterisk (default) to your own. Requires Asterisk v1.x) •recordhistory = yes|no. Enable logging of SIP conversation's transaction history. Default no. (New in v1.2.x). •regcontext = context : Default context to use for SIP REGISTER replies from the SIP Registrar. •register => ::[authid]@/ :Register with a SIP provider •registerattempts = Number : Number of SIP REGISTER messages to send to a SIP Registrar before giving up. Default 0 (no limit). (New in v1.2.x). •registertimeout = Number : Number of seconds to wait for a response from a SIP Registrar before classifying the SIP REGISTER has timed out. Default 20 seconds. (New in v1.2.x). •relaxdtmf = yes|no: Default no. •rtautoclear = yes|no|number : Auto-Expire friends created on the fly. If yes the autoexpire will be in 120 seconds. Default yes. (New in v1.2.x). Buggy up to 1.4.19, see bug 12707 •rtcachefriends = yes|no : Cache realtime friends by adding them to the internal list just like friends added from the config file. Default no. (New in v1.2.x). Buggy up to 1.4.19, see bug 12707 •rtsavesysname = yes|no : If set will write the value of asterisk.conf (options) systemname to the sip peer table in the field "regserver". Useful for multi-server systems. (New in v1.?) •rtpholdtimeout = Number : Max number of seconds of inactivity before terminating a call on hold. Default 0 (no limit). (New in v1.2.x). •rtpkeepalive = Number : Number of seconds, when a RTP Keepalive packet will be sent if no other RTP traffic on that connection. Default 0 (no RTP Keepalive). (New in v1.2.x). •rtptimeout = Number : Number of seconds, to wait for RTP traffic before classify the connection as discontinued. Default 0 (no RTP timeout). (New in v1.2.x). •rtupdate = yes|no : Send registry updates to the database when using Realtime support. Default yes. (New in v1.2.x). •sendrpid = yes|no : If a Remote-Party-ID SIP header should be sent. Default no. •sipdebug = yes|no. Default setting for whether SIP debug is enabled upon loading of the sip.conf. Default no. (New in v1.2.x). •srvlookup = yes|no : Enable DNS SRV lookups on calls. Default yes. (Default is no prior to v1.4.14) •tos = : Set IP QoS parameters for outgoing media streams (numeric values are also accepted, like tos=184 ) •trustrpid = yes|no : If Remote-Party-ID SIP header should be trusted. Default no. •useclientcode = yes|no : If yes, then the Call Originator as stated in the CDR will be changed to whatever is specified in a X-ClientCode SIP Header. Default no. (New in v1.2.x) •usereqphone = yes|no : Indicates whether to add a ";user=phone" to the URI. Default no. (New in v1.2.x) •useragent = : Allow the SIP header "User-Agent" to be customized. Default asterisk. •videosupport = yes|no : Turn on support for SIP video (peer specific setting added in SVN Dec 21 2005, bug 5427. Default no. •vmexten = : Dialplan extension to reach mailbox. Default asterisk. (New in v1.2.x) •callevents = yes|no: Set to yes to receive events on AMI when a call is put on/off hold. SIP configurations - peers and clients These variables can be configured for each SIP peer definition: (If not specified, the configuration variable can be used for both type=peer and type=user.) •accountcode = : Users may be associated with an accountcode. See Asterisk billing •allow = : Allow codecs in order of preference (Use DISALLOW=ALL first, before allowing other codecs) •disallow = all : Disallow all codecs for this peer or user definition. •allowguest = yes|no : Allow or reject guest calls (default is yes, this can also be set to 'osp' if asterisk was compiled with OSP support). (New in v1.2.x). •amaflags : Categorization for CDR records. Choices are default, omit, billing, documentation. See Asterisk billing •astdb : Appears to insert a value in the Asterisk database. See example below. •auth = : Value assigned to the Digest username= SIP header. •callerid = : Caller ID information used when nothing else is available. Defaults to asterisk. •busylevel = number : Number of simultaneous calls until user/peer is busy •call-limit = number : Number of simultaneous calls through this user/peer. •callgroup = num1,num2-num3 : Defines call groups for calls to this device. •callingpres = number|descriptive_text : Set Caller-ID presentation on a call. Valid descriptive values are: allowed_not_screened, allowed_passed_screen, allowed_failed_screen, allowed, prohib_not_screened, prohib_passed_screen, prohib_failed_screen, prohib, and unavailable. See SetCallerPres for more information. Default allowed_not_screened. •canreinvite = update|yes|no|nonat : If the client is able to support SIP re-invites. Default yes. •context = : If type=user, the Context for the inbound call from this SIP user definition. If type=peer, the Context in the dialplan for outbound calls from this SIP peer definition. If type=friend the context used for both inbound and outbound calls through the SIP entities definition. If no type=user entry matches an inbound call, then a type=peer or type=friend will match if the hostname or IP address defined in host= matches. •defaultip = Dotted.Quad.IP.Addr : Default IP address of client if host=dynamic is specified. Used if client has not registered at any other IP address. Valid only for type=peer. •directrtpsetup = yes|no: Similar to canreinvite, but right away passes media to the other party like a SIP proxy •dtmfmode = inband|info|rfc2833 : How the client handles DTMF signalling. Default rfc2833. Warning: inband very high CPU load. •fromuser = : Specify user to put in "from" instead of $CALLERID(number) (overrides the callerid) when placing calls _to_ peer (another SIP proxy). Valid only for type=peer. •fromdomain = : Sets default From: domain in SIP messages when placing calls _to_ peer. Valid only when in [general] section or type=peer. •fullcontact = : SIP URI contact for realtime peer. Valid only for realtime peers. •host = dynamic|hostname|IPAddr : How to find the client - IP # or host name. If you want the phone to register itself, use the keyword dynamic instead of Host IP. •incominglimit and outgoinglimit = Number : Limits for number of simultaneous active calls for a SIP client. Valid only for type=peer. •insecure : very|yes|no|invite|port : Specifies how to handle connections with peers. Default no (authenticate all connections). (invite and port added in v1.2.x). •ipaddr : Dotted Quad IP address of the peer. Valid only for realtime peers. •language : A language code defined in indications.conf - defines language for prompts •mailbox = mailbox : Voicemail extension (for message waiting indications). Valid only for type=peer. Edit: also valid for type=friend (verified with 1.4.22.1). •md5secret : MD5-Hash of ":==SIP_realm==:" (can be used instead of secret). Default for authenticating to an Asterisk server when SIP realm is not explicitly declared is ":asterisk:". •musicclass = one of the classes specified in musiconhold.conf •musiconhold = Set class of musiconhold on calls from SIP phone. Calls to the phone require SetMusicOnHold cmd of higher priority (lower numerical value of priority) than Dial cmd in dialplan in order to set this class for the call. Calls have the MusicOnHold class set on a per call basis, not on a per phone basis, and making a call through any extension specifying SetMusicOnHold will override this value for the call. •subscribemwi: Instructs Asterisk to not send NOTIFY messages for message waiting indication (added in v1.4) •name = : Name of the realtime peer. If the peer is an actual phone then this will generally be the extension number of that phone. On some softphones this field corresponds to the "username" field/option in the softphone's settings. Valid only for realtime peers. •nat = yes|no : This variable changes the behaviour of Asterisk for clients behind a firewall. This does not solve the problem if Asterisk is behind the firewall and the client on the outside. Please note that as of Asterisk 1.0.x nat can now have the values: yes|no|never|route. Default no which really means to use rfc3581 techniques. •outboundproxy = IP_address or DNS SRV name (excluding the _sip._udp prefix) : SRV name, hostname, or IP address of the outbound SIP Proxy. Valid only in [general] section and type=peer. (New in v1.2.x). •permit, deny,mask : IP address and network restriction •pickupgroup : Group that can pickup fellow workers' calls using *8 and the Pickup() application on the *8 extension •port : SIP port of the client •progressinband = never|no|yes : If we should generate in-band ringing always. Default never. •promiscredir = yes|no : Allows support for 302 Redirects; (Note: will redirect them all to the local extension returned in Contact rather than to that extension at the destination). Default no. •qualify = yes|no|milliseconds : Check if client is reachable. If yes, the checks occur every 60 seconds. Valid only in [general] section and type=peer. •regexten = •regseconds = seconds : Number of seconds between SIP REGISTER. Valid only for realtime peer entries. •restrictcid : (yes/no) To have the callerid restricted -> sent as ANI; use this to hide the caller ID. This does not seem to work. This variable has been deprecated as of v1.2.x. •rtpkeepalive = seconds : Number of seconds, when a RTP Keepalive packet will be sent if no other RTP traffic on that connection. Default 0 (no RTP Keepalive). Valid only in [general] section and type=peer. •rtptimeout = seconds : Terminate call if x seconds of no RTP activity when we're not on hold. Valid only in [general] section and type=peer. •rtpholdtimeout = seconds : Terminate call if x seconds of no RTP activity when we're on hold (must be larger than rtptimeout). Valid only in [general] section and type=peer. •secret : If Asterisk is acting as a SIP Server, then this SIP client must login with this Password (A shared secret). If Asterisk is acting as a SIP client to a remote SIP server that requires SIP INVITE authentication, then this field is used to authenticate SIP INVITEs that Asterisk sends to the remote SIP server. Asterisk 1.6.2.x: Changed the secret parameter to remotesecret. •sendrpid = yes|no : If a Remote-Party-ID SIP header should be sent. Default no. •setvar = variable=value : Channel variable to be set for all calls from this peer/user. •subscribecontext = : Set a specific context for SIP SUBSCRIBE requests •trustrpid = yes|no : If Remote-Party-ID SIP header should be trusted. Default no. •type = user|peer|friend : Relationship to client - outbound provider or full client? •useclientcode = yes|no : If yes, then the Call Originator as stated in the CDR will be changed to whatever is specified in a X-ClientCode SIP Header. Default no. (New in v1.2.x) •usereqphone = yes|no : Indicates whether to add a ";user=phone" to the URI. Default no. Valid only in [general] and type=peer. •username = : If Asterisk is accepting SIP INVITE requests from a remote SIP client, this field specifies the user name for authentication. (Contrast with fromuser.) Also, for peers that register with Asterisk, this username is used in INVITEs until we have a registration. •vmexten = : Dialplan extension to reach mailbox. Default asterisk. Valid only in [general] or type=peer. Notes •Asterisk does not yet support SIP over TCP. It only supports SIP over UDP. •For Grandstream phones: set dtmfmode=info •Asterisk uses the incoming RTP Stream as a timing source for sending its outgoing Stream. If the incoming stream is interrupted due to silence suppression then musiconhold will be choppy. So in conclusion, you cannot use silence suppression. Make sure ALL SIP phones have disabled silence suppression. There is a solution for the silence suppression problem, see bug 5374 for details. Examples Peer/User Sections Each SIP client that connects to Asterisk needs a definition in SIP.CONF. Here is a few samples: [grandstream1] type=friend ; either "friend" (peer+user), "peer" or "user" context=from-sip username=grandstream1 ; usually matches the section title fromuser=grandstream1 ; overrides the callerid, e.g. required by FWD callerid=John Doe <1234> host=192.168.0.23 ; we have a static but private IP address nat=no ; there is not NAT between phone and Asterisk canreinvite=yes ; allow RTP voice traffic to bypass Asterisk dtmfmode=info ; either RFC2833 or INFO for the BudgeTone mailbox=1234@default ; mailbox 1234 in voicemail context "default" disallow=all ; need to disallow=all before we can use allow= allow=ulaw ; Note: In user sections the order of codecs ; listed with allow= does NOT matter! ;allow=alaw ;allow=g723.1 ; Asterisk only supports g723.1 pass-thru! ;allow=g729 ; Pass-thru only unless g729 license obtained astdb=chan2ext/SIP/grandstream1=1234 ; ensures an astDB entry exists [xlite1] ;Turn off silence suppression in X-Lite ("Transmit Silence"=YES)! ;Note that Xlite sends NAT keep-alive packets, so qualify=yes is not needed type=friend username=xlite1 callerid="Jane Smith" <5678> host=dynamic nat=yes ; X-Lite is behind a NAT router canreinvite=no ; Typically set to NO if behind NAT disallow=all allow=gsm ; GSM consumes far less bandwidth than G711-u (ulaw) allow=ulaw allow=alaw [user1_snomsip] type=friend secret=blah host=dynamic dtmfmode=inband ; Choices are inband, rfc2833, or info defaultip=192.168.0.59 mailbox=1234,2345 ; Mailbox for message waiting indicator disallow=all allow=ulaw ; since we chose 'inband' for dtmf we must use g.711 allow=alaw [user2_pingtel] type=friend username=user2_pingtel secret=blah host=dynamic qualify=1000 ; Consider it down if it's 1 second to reply callgroup=1,3-4 ; we are member of the call groups 1, 3 and 4 pickupgroup=1,3-4 ; we can do call pick-up with *8 for the callgroups 1, 3 and 4 defaultip=192.168.0.60 disallow=all allow=ulaw allow=alaw allow=g729 [user3_cisco] type=friend username=user3_cisco secret=blah nat=yes ; This phone may be natted host=dynamic canreinvite=no ; Cisco poops on reinvite sometimes qualify=200 ; Qualify peer is no more than 200ms away defaultip=192.168.0.4 disallow=all allow=ulaw allow=alaw allow=g729 [user4_cisco1] type=friend username=user4_cisco fromuser=markster ; Specify user to put in "from" instead of callerid secret=blah defaultip=192.168.0.4 ; use either host=dynamic or defaultip=... amaflags=default ; Choices are default, omit, billing, documentation accountcode=markster ; Users may be associated with an accountcode to ease billing disallow=all allow=ulaw allow=alaw allow=g729 allow=g723.1 These definitions are documented in the Digium Asterisk handbook. After you defined these SIP client accounts in SIP.conf you are able to login to the asterisk server from clients and place calls. To receive calls, you need to configure extensions in extensions.conf. Example: exten => 1010,1, Dial(SIP/user3_cisco,10,t) If someone calls extension 1010, the sip client logged in as user3_cisco is dialled in order to receive the call. Notes •the variable ${VXML_URL} can be used to add additional items to the To: header. The value is appended, after a semicolon, to the SIP To: header. Note that previous documentation on this site was incorrect; this variable has nothing to do with pushing pages to a Cisco 7960 phone (something that is currently impossible in the Cisco SIP firmware). •the variable ${ALERT_INFO} can be used to create a new header called Alert-Info: which can be used to create distinctive ringing on the Cisco SIP-enabled phone devices with firmware version 6.0 onward. For Cisco 7940/60, ALERT_INFO can have the value of any of the following built-in ringtones: - Bellcore-BusyVerify - Bellcore-Stutter - Bellcore-MsgWaiting - Bellcore-dr1 - Bellcore-dr2 - Bellcore-dr3 - Bellcore-dr4 - Bellcore-dr5 It is not currently possible to specify a custom ring tone, only a cadence on the default ringtone. You will have to listen quite carefully to tell that the ringing is different. Cisco bug ID CSCec42938 tracks the request for it to work on custom ring tones. Connect to Free World Dialup (no NAT) •John Todd, loligo.com: http://www.loligo.com/asterisk/current/sip.conf [general] disallow=all allow=gsm allow=ulaw allow=alaw context=from-sip maxexpirey=180 defaultexpirey=160 tos=reliability register => :@fwd.pulver.com/CONTACT [fwd.pulver.com] type=friend secret= username= host=fwd.pulver.com insecure=very ; required for incoming FWD calls Now go to Asterisk config extensions.conf to view how to setup [from-sip] and [fwd-out] contexts in extensions.conf Using Asterisk together with SER [general] context=OUTGOING autocreatepeer=yes [Provider] type=friend username=XXXXX secret=XXXXX host=xxxxx.FakeProvider.com So when Asterisk receives a call from SER it will "autocreatepeer" and give access to the OUTGOING context. Using Asterisk together with OpenSER [general] context=OUTGOING autocreatepeer=yes [Provider] type=friend username=__what_so_ever__ secret=__what_so_ever__ host=xyz.FakeProvider.com Asterisk will create peer when receives a call from OpenSER and gives access to the OUTGOING context. To use Asterisk and OpenSER together in realtime, see Realtime Integration Of Asterisk With OpenSER. Controlling sip.conf from outside •Asterisk sip conf from mysql: As with all .conf files the #include statement can be applied to insert another file into sip.conf Version notes This section will document things that may break as you upgrade a version. New features generally don't break old configuration files. •1.2: Channel configuration keyword restrictcid has been deprecated. •1.2.10: The general keyword "port" has changed to "bindport". "port" in channel configurations remains as a reference to the remote server. •1.4.x: Realtime cached friends are buggy up to 1.4.19: bug 12707 See also •How to set up a SIP trunk in the Asterisk PBX - Basic setup How-To/tutorial, SIP trunk and dialplan, to dial out, and in. •Asterisk 1.4 comes with a new adaptive general jitter buffer also for chan_sip. More details here by Russel. •Asterisk sip channels: More documentation on SIP.conf •SIP: Session Initiation Protocol •Asterisk config extensions.conf: Asterisk extensions.conf samples •Asterisk How to connect to FWD: Examples on how to configure Asterisk for Free World Dialup •Asterisk at large: Running a SER proxy in front of Asterisk •Letting SIP clients connect directly without media through asterisk •Asterisk config files •Asterisk SIP chan_sip2: Information about Olle E. Johansson's chan_sip2 project (was partially incorporated into Asterisk 1.4) •Simple sip.conf generator (bash script) View

分享到:
评论

相关推荐

    使用Asterisk作为SIP.2 H.323网关配置

    使用Asterisk作为SIP.2 H.323网关配置需要安装Asterisk、下载并编译OH323.SO模块、配置OH323.CONF文件、配置Trunk线路和路由脚本。通过这些步骤,我们可以使用Asterisk来路由H.323话务到SIP Server。

    asterisk-sip配置说明.

    extensions.conf中使用sip设备的语法是SIP/devicename,devicename名在下一节中说明。 如果用户在Internet上,可以使用SIP/username@domain形式,同时不要忘记打开DNS SRV功能。 如果定义了一个SIP代理,可以使用SIP/...

    使用sip.js 实现网络通话,视频语音等一系列功能

    为了开始使用SIP.js,你需要配置一个SIP服务器,例如asterisk、FreeSWITCH或Kamailio。然后,创建UserAgent实例,设置认证信息、代理服务器地址和其他必要参数。接下来,你可以监听事件并处理相应的通话逻辑,例如...

    asterisk-1.8.10.1.tar.gz

    Asterisk的配置相当灵活,其核心配置文件一般位于/etc/asterisk下,包括extensions.conf(定义拨号计划)、sip.conf(配置SIP用户代理)和iax2.conf(配置IAx2用户代理)等。这些文件允许我们根据需求定制通话流程,...

    Asterisk系统的安装与配置

    在/etc/asterisk/sip.conf文件中,添加以下配置: [general] language=cn/en bindaddr=0.0.0.0 四、配置基本SIP账户 在/etc/asterisk/sip.conf文件中,添加以下配置: [SIPPHONE](!) type=friend host=dynamic ...

    asterisk-16.0.0.jar

    asterisk-16.0.0.jar 呼叫中心的jar包 基于asteriter

    asterisk-1.8.8.0.tar.gz

    在安装和配置过程中,可能需要根据具体的硬件环境、网络条件和业务需求调整配置文件,如`extensions.conf`(呼叫路由)、`sip.conf`(SIP用户代理配置)和`modules.conf`(加载的模块)等。 Asterisk 1.8.8.0是一个...

    asterisk_dialplan学习笔记

    Asterisk的配置文件主要包括sip.conf和extensions.conf两个文件,sip.conf文件中定义了SIP协议的设置和SIP分机的设置,而extensions.conf文件中定义了拨号方式的条目。通过这些配置文件,Asterisk可以实现VoIP和传统...

    asterisk-1.8.32.3.tar.gz

    2. **协议支持**:Asterisk支持多种VoIP协议,如SIP(Session Initiation Protocol)、IAX(Inter-Asterisk eXchange)和H.323,以及传统PSTN(Public Switched Telephone Network)的FXS/FXO接口。 3. **媒体处理*...

    asterisk-11.0.1.tar.gz

    4. **配置**:根据需求编辑配置文件,如extensions.conf(拨号计划)、sip.conf(SIP设置)、iax.conf(IAX设置)等。 5. **启动和服务管理**:启动Asterisk服务,并使用`asterisk -r`进入命令行模式进行管理。 6....

    sip.zip_asterisk_sip ppt

    1. **配置文件**:在Asterisk中,SIP配置主要位于`sip.conf`文件中,包括用户定义、认证信息、传输设置等。 2. **拨号计划**:`extensions.conf`文件定义了呼叫流程,如接听、转移、播放音乐等,SIP呼叫在此处被...

    asterisk 教程

    - `/etc/asterisk/sip.conf`:SIP协议配置。 - `/etc/asterisk/iax.conf`:IAX通道的呼入呼出设置。 - `/etc/asterisk/extensions.conf`:拨号计划配置。 - `/etc/asterisk/logger.conf`:日志调试信息配置。 - `/...

    asterisk-java.CHM

    asterisk-java AGI 通过asterisk ami接口,连接asterisk. api,开发自己的呼叫中心

    Asterisk服务器之间的互联

    在配置过程中,我们需要编辑Asterisk的主要配置文件,包括`sip.conf`和`extensions.conf`。`sip.conf`用于定义SIP用户代理和服务器之间的关系,而`extensions.conf`则定义了呼叫路由规则。 在serverA上,我们首先要...

    asterisk-1.6.2.6-2来电显示的bug修复以及asterisk-1.6.2.6-2 rpm重新打包

    标题中的“asterisk-1.6.2.6-2来电显示的bug修复”涉及到的是 Asterisk 通信软件的一个特定版本及其存在的问题。Asterisk 是一个开源的PBX(Private Branch eXchange)系统,它允许用户创建自己的电话网络,并提供...

    asterisk安装及sip设置和wxCommunicator的配置

    - 要实现 SIP 通话功能,需要编辑 Asterisk 的 SIP 配置文件 `sip.conf`: - 打开 `/etc/asterisk/sip.conf` 文件,设置 SIP 服务器的相关参数,如监听端口、IP 地址等。 - 添加 SIP 用户账户信息,包括用户名、...

    Asterisk 之数据库配置方案 asterisk数据库

    7. Asterisk 的配置文件包括 zapata.conf、zapata-channels.conf、sip.conf 和 extensions.conf 等。 8. 在 Kamailio.cfg 文件中需要配置 switch 语句来管理 Asterisk 的配置。 9. 在 Asterisk 中,需要安装 ...

    asterisk的G729和G723编码配置

    其次,需要在sip.conf或iax.conf文件中全局添加以下内容: disallow=all allow=g729 allow=g723 四、加载G729和G723模块 在Asterisk控制台上,使用以下命令加载G729和G723模块: module load codec_g729.so ...

    Asterisk服务器搭建和配置文档.docx

    sudo vim /etc/asterisk/sip.conf ``` 在文件中添加以下内容: ```plaintext [general] context=default tcpbindaddr=0.0.0.0 tcpenable=yes [1001] type=friend callerid=UserOne secret=1001 host=dynamic ...

    Freepbx中各配置文件的介绍关系作用.doc

    sip.conf是Asterisk处理SIP(Session Initiation Protocol)通信的核心配置文件。在FreePBX中,它通常包含了服务器如何与SIP客户端交互的设置。`[general]` 部分定义了全局参数,如`context`,它指定了SIP用户的...

Global site tag (gtag.js) - Google Analytics