Fault 1: The device has no signal
Failure Analysis: This phenomenon co2 monitor by damaged probes. reason:
(1) The probe is dropped or accidentally bumped;
2. The elastic or soft contact part of the probe wire is damaged;
Fault 2: The probe has a red light source, but no signal is fed back to the barium detector screen.
Fault analysis: This kind of development is mostly due to the damage to the component of the wire connecting a machine. The reasons are mostly:
1. The red light source of the probe is weak light, which is used for the aging of the light-emitting diode of the probe;
2. The signal is unstable, repeated plugging and unplugging of the connecting wire or poor contact of the socket, and the diameter of the socket increases, resulting in poor contact between the socket and the socket.
Fault 3: The cuff blood pressure is faulty, the cuff blood pressure pump works repeatedly, but the number of blood pressure is not displayed.
Failure analysis: The main reasons are air bag or trachea leakage, trachea and cannula joint gaskets are broken or lost, air pump leakage, air pump solenoid valve damage, blood pressure data is different from other monitor measurement results, often with the fixed position of the air bag, the size of the air bag and the upper extremity. location related.
Fault 4: Invasive blood pressure not displayed
Failure analysis: the wiring is correct; the sensor is connected correctly; the connecting pipe is damaged;
Fault 5: The connection is made correctly, but the waveform and data are not displayed on the screen.
Fault analysis:
1. The connecting hose is blocked
2. The interface of the gasification bottle is blocked
3. There is a crack in the connecting pipe;
4. The vaporizer bottle is stuck in the correct position
相关推荐
官方离线安装包,测试可用。使用rpm -ivh [rpm完整包名] 进行安装
understand segmentation faults and core dumps, and figure out why your program crashes or throws exceptions. The book also explains how to use features like catchpoints, convenience variables, and ...
官方离线安装包,测试可用。使用rpm -ivh [rpm完整包名] 进行安装
官方离线安装包,测试可用。使用rpm -ivh [rpm完整包名] 进行安装
官方离线安装包,测试可用。使用rpm -ivh [rpm完整包名] 进行安装
官方离线安装包,亲测可用。使用rpm -ivh [rpm完整包名] 进行安装
官方离线安装包,亲测可用。使用rpm -ivh [rpm完整包名] 进行安装
永磁同步电机节能
underwater vehicle (AUV) with rudders faults and ocean current disturbance. The adaptive dynamic programming (ADP) method is adopted to transform the fault-tolerant tracking control problem into an ...
Differences and common attributes of i486 and 80386/80387. Differences in register structures. Differences in memory management. i486 reset. i486 real mode. i486 protected mode. i486 virtual ...
Due to the limitation of our knowledge, we could not provide more details in relationship between existing faults and potential faults now. But our research moves forward in fault location analysis ...
Condition Monitoring and Faults Diagnosis of Induction Motors Electrical Signature Analysis
Grid-connected distributed generation sources interfaced with voltage source inverters (VSIs) need to be disconnected the grid under: 1) excessive dc-link voltage 2) ...different types of grid faults.
Explores and identifies the main issues, concepts, principles and evolution of software testing, including software quality engineering and testing concepts, test data generation, test deployment ...
address the threats to dependability and security (faults, errors, failures), their attributes, and the means for their achievement (fault prevention, fault tolerance, fault removal, fault forecasting...
through digital certificates to ensure integrity of sender and receiver. Security testing terminologies 1. Unit Testing: Testing is the strategy to detect faults in the System. Unit testing means ...
Fast computation of the kurtogram for the detection of transient faults
As a consequence, the grid converters should be able to exhibit advanced functions like: dynamic control of active and reactive current injection during faults, and grid services support.This book ...
UDDI and ebXML Standard Formats ....................................................................................... 52 Java EE Application Assembly andDeployment .....................................
By understanding the parameters of the problem and their impact on compiler design, the authors hope to convey both the depth of the problems and the breadth of possible solutions. Their goal is to ...