http://www.delorie.com/djgpp/zip-picker.cgi
C:\> mkdir djgpp
C:\> cd djgpp
C:\DJGPP> unzip32 d:\tmp\djdev203.zip
C:\DJGPP> unzip32 d:\tmp\faq230b.zip
C:\DJGPP> unzip32 d:\tmp\rhid15ab.zip
C:\DJGPP> unzip32 d:\tmp\bnu219b.zip
C:\DJGPP> unzip32 d:\tmp\gcc452b.zip
C:\DJGPP> unzip32 d:\tmp\gdb611b.zip
C:\DJGPP> unzip32 d:\tmp\gpp452b.zip
C:\DJGPP> unzip32 d:\tmp\mak3791b.zip
C:\DJGPP> unzip32 d:\tmp\txi412b.zip
When properly installed, you should have a c:\djgpp\bin directory, and in it should be at least gcc.exe, as.exe, and stubify.exe. If all the files are in c:\djgpp with no subdirectories, or you see directories like c:\djgpp\djdev203\, you need to delete everything and try a different unzip program.
Make sure you use the djgpp's unzip32, or some other unzip that doesn't support long file names. If you install with WinNT long file names, C++ programs won't compile. Another option is to use pkunzip instead (see the MS-DOS install instructions) or read the FAQ about the NameNumericTail registry key.
Right-click My Computer, select Properties. Select the Advanced tab, then the Environment Variables button. Edit the Path (or PATH, whichever exists) system variable to include C:\DJGPP\BIN at the front. (If you are not an administrator, add it to the PATH variable in the User Variables section, or add a new PATH user environment variable which contains only C:\DJGPP\BIN) Add a new variable DJGPP set to C:\DJGPP\DJGPP.ENV (system variable if possible, user variable if not an administrator) .
You'll need to close and reopen your MS-DOS windows for these changes to take effect.
Rather than edit your autoexec files and/or global environment, you may wish to create a djgpp shortcut instead. To do this, create a c:\djgpp\djgpp.bat that has lines like this:
@echo off
set PATH=c:\djgpp\bin;%PATH%
set DJGPP=c:\djgpp\djgpp.env
chdir c:\djgpp\mystuff (or any other directory)
command
分享到:
相关推荐
gcc-linaro-7.5.0-2019.12-x86_64_arm-linux-gnueabihf.tar.tar是由 Linaro 公司基于GCC推出的的ARM交叉编译工具。可用于交叉编译32-bit Armv7 Cortex-A, hard-float, little-endian目标中的裸机程序、u-boot、Linux...
gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu.tar.tar是由 Linaro 公司基于GCC推出的的ARM交叉编译工具。可用于交叉编译64-bit Armv8 Cortex-A, little-endian目标中的裸机程序、u-boot、Linux kernel、...
x86_64-8.1.0-release-posix-seh-rt_v6-rev0 离线安装包,国外的网址太难下载了,半天也下载不来,需要的朋友可以这里下载,里面有安装说明和环境变量配置,亲测有用!
gcc-linaro-6.2.1-2016.11-x86_64_arm-linux-gnueabihf是由 Linaro 公司基于GCC推出的的ARM交叉编译工具。可用于交叉编译32-bit Armv7 Cortex-A, hard-float, little-endian目标中的裸机程序、u-boot、Linux kernel...
gcc-linaro-7.5.0-2019.12-x86_64_aarch64-linux-gnu.tar.tar是由 Linaro 公司基于GCC推出的的ARM交叉编译工具。 可用于交叉编译64-bit Armv8 Cortex-A, little-endian目标中的裸机程序、u-boot、Linux kernel、...
mips-gcc交叉编译工具压缩包gcc-4.3-ls232.tar.gz 适用于CPU设计实战4.3节的内容
gcc-linaro-6.3.1-2017.05-x86_64_arm-linux-gnueabihf.tar.xz是由 Linaro 公司基于GCC推出的的ARM交叉编译工具。可用于交叉编译32-bit Armv7 Cortex-A, hard-float, little-endian目标中的裸机程序、u-boot、Linux ...
gcc-linaro-4.9.4-2017.01-x86_64_arm-linux-gnueabihf 是由 Linaro 公司基于GCC推出的的ARM交叉编译工具。可用于交叉编译32-bit Armv7 Cortex-A, hard-float, little-endian目标中的裸机程序、u-boot、Linux kernel...
gcc-linaro-7.4.1-2019.02-x86_64_arm-linux-gnueabihf是由 Linaro 公司基于GCC推出的的ARM交叉编译工具。可用于交叉编译32-bit Armv7 Cortex-A, hard-float, little-endian目标中的裸机程序、u-boot、Linux kernel...
gcc-linaro-7.4.1-2019.02-x86_64_aarch64-linux-gnu是由 Linaro 公司基于GCC推出的的ARM交叉编译工具。可用于交叉编译64-bit Armv8 Cortex-A, little-endian hard-float, little-endian目标中的裸机程序、u-boot、...
gcc-linaro-7.4.1-2019.02-x86_64_arm-linux-gnueabihf是由 Linaro 公司基于GCC推出的的ARM交叉编译工具。可用于交叉编译32-bit Armv7 Cortex-A, hard-float, little-endian目标中的裸机程序、u-boot、Linux kernel...
warning: gcc-c++-4.4.7-3.el6.x86_64.rpm: Header V3 RSA/SHA1 Signature, key ID c105b9de: NOKEY error: Failed dependencies: gcc = 4.4.7-3.el6 is needed by gcc-c++-4.4.7-3.el6.x86_64 libstdc++ = 4.4.7-...
gcc-4.8.5-44.el7.x86_64.rpm gcc-c++-4.8.5-44.el7.x86_64.rpm gcc-gfortran-4.8.5-44.el7.x86_64.rpm libgfortran-4.8.5-44.el7.x86_64.rpm libquadmath-4.8.5-44.el7.x86_64.rpm libquadmath-devel-4.8.5-44.el7....
交叉编译工具:gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux.tar.bz2 解压命令:tar jxvf gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux.tar.bz2
AARCH64 交叉编译工具链 gcc-linaro-11.2.1-2021.10-x86_64_aarch64-linux-gnu.tar.xz
MinGW-W64 GCC-8.1.0 windows 下gcc编译版本,压缩包里包括四个版本,分别是 x86_64-posix-sjlj x86_64-posix-seh x86_64-win32-sjlj x86_64-win32-seh posix和win32是os接口类型 sjlj, seh是异常处理方案, 如果不...
交叉编译工具gcc-linaro-4.9.4-2017.01-x86_64_arm-linux-gnueabihf,官网下载,可用
gcc-linaro-7.4.1-2019.02-x86_64_arm-eabi_02(共2个压缩分卷)是由 Linaro 公司基于GCC推出的的ARM交叉编译工具。可用于交叉编译32-bit Armv7 Cortex-A, soft-float, little-endian目标中的裸机程序、u-boot、Linux ...
gcc-linaro-7.4.1-2019.02-x86_64_arm-linux-gnueabihf.tar.xz 工具,我这个免费下载,鄙视那些要币的人!下载后先解压rar,解压就就是gcc-linaro-7.4.1-2019.02-x86_64_arm-linux-gnueabihf.tar.xz了! 我本来想...