环境:
OS:Red Hat Linux As 5
DB:11.2.0.1
今天在安装好11gR2软件后准备通过dbca创建数据库,执行dbca的时候包如下错误:
[Oracle@primary ~]$dbca
Oracle Net Services Configuration:
#
# An unexpected error has been detected by HotSpot Virtual Machine:
#
# SIGSEGV (0xb) at pc=0xa44b13a8, pid=2973, tid=3086891216
#
# Java VM: Java HotSpot(TM) Client VM (1.5.0_17-b02 mixed mode)
# Problematic frame:
# C [libnnz11.so+0x3c3a8]
#
# An error report file with more information is saved as hs_err_pid2973.log
#
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
步骤如下:
1.下载p8670579_112010_LINUX.zip,并上传到服务器上的目录/ftp
2.确认是否配置了ORACLE_HOME
[oracle@primary]$ echo $ORACLE_HOME
/u01/app/oracle/product/11.2.0/db_1
3.检查perl的版本,需要5.00503以上的版本
[oracle@primary 8670579]$ perl -v
This is perl, v5.8.8 built for i386-linux-thread-multi
4.Verify the OUI Inventory.
$opatch lsinventory
5.解压缩补丁包
$unzip p8670579_112010_LINUX.zip
6.确保数据库已经停止
$cd /ftp/8670579
$opatch apply
README.txt里的说明如下:
[oracle@primary 8670579]$ more README.txt
=========================================================================
Interim Patch for Base Bug: 8670579
=========================================================================
Date: 25th February 2010
-------------------------------------------------------------------------
Platform Patch for : Linux x86
Product Patched : NETWORK
Product Version # : 11.2.0.1
RAC Rolling Installable : YES
Online Installable : NO
Bugs Fixed by this patch:
-------------------------
8670579 - DBBETA :NETCA/DBCA FAILED WITH HOTSPOT VIRTUAL MACHINE
Patch Preinstall Steps
----------------------
1. For non-recommended patches, you must have the exact symptoms
described in the service request (SR).
2. Confirm the version of Perl installed and configured for the ORACLE_HOME.
Oracle requires that all customers have at least Perl 5.00503 installed
and configured for patching activities inside the ORACLE_HOME. Follow
these steps to check the Perl version for the ORACLE_HOME being patched:
- source the ORACLE_HOME environment
- execute "perl -v"
- verify that the returned version of Perl is 5.00503 or higher
If the Perl configured for the ORACLE_HOME is not at 5.00503 or
higher, follow the directions in this metalink note to update to
a more recent version:
https://metalink.oracle.com/metalink/plsql/ml2_documents.showNOT?p_id=189489.1
3. Verify the OUI Inventory.
OPatch needs access to a valid OUI inventory to apply patches.
Validate the OUI inventory with the following command:
% opatch lsinventory
If the command errors out, contact Oracle Support and work to validate
and verify the inventory setup before proceeding.
4. Review and download the latest version of OPatch.
Oracle recommends that all customers be on the latest version of OPatch.
Please review the following metalink note and follow the instructions
to update to the latest version if needed:
https://metalink.oracle.com/metalink/plsql/ml2_documents.showNOT?p_id=224346.1
5. Confirm executables appear in your system PATH.
The patching process will use the unzip and the opatch executables. After
sourcing the ORACLE_HOME environment, confirm both of these exist before
continuing:
- "which opatch"
- "which unzip"
If either of these executables do not show in the PATH, correct the problem
before proceeding.
6. Create a location for storing the unzipped patch. This location
will be referred to later in the document as <PATCH_TOP>.
7. Unzip the patch zip file into the <PATCH_TOP>.
unzip -d <PATCH_TOP> <ZIP_FILE>
8. Shut down services running from the ORACLE_HOME.
Before applying this patch, do a clean shut down of all services
running from the ORACLE_HOME.
(a) In a non-RAC environment:
Shut down all services that are running from this ORACLE_HOME.
Confirm the return status from each shutdown command to verify
the shutdown is successful and there are no errors.
(b) In a RAC environment:
For each node in the RAC system, shut down the services for
the specific machine that are running from the ORACLE_HOME.
OPatch will be used on each node in the RAC system one at
a time. If this patch is not rolling RAC installable treat
it as a non-RAC environment and shut down all services.
As an example, in the case of a two node RAC system:
1. Stop instances running on node 1.
2. Run 'opatch apply <PATCH_TOP>/8670579' on node 1.
3. When the apply finishes, opatch asks for confirmation
before going on to apply the patch to node 2.
4. Start instances on node 1.
5. Stop instances running on node 2.
6. Ask opatch to continue to applying the patch to node 2.
7. Start instances on node 2.
9. Apply pre-requisite updates.
Patch Installation Steps:
-------------------------
1. Set your current directory to the directory where the patch is located.
% cd <PATCH_TOP>/8670579
2. Apply the patch.
Use the following command to apply the patch to the ORACLE_HOME:
% opatch apply
When OPatch starts, it will validate the patch and make sure there
are no conflicts with the software already installed in the ORACLE_HOME.
OPatch categorizes two types of conflicts:
(a) Conflicts with a patch already applied to the ORACLE_HOME
In this case, please stop the patch installation and contact
Oracle Support Services.
(b) Conflicts with subset patch already applied to the ORACLE_HOME
In this case, please continue the install, as the new patch
contains all the fixes from the existing patch in the ORACLE_HOME.
The subset patch will automatically be rolled back prior to the
installation of the new patch.
Patch Post Install Instructions:
--------------------------------
Patch Deinstallation Instructions:
----------------------------------
1. Make sure to follow the same pre-install steps when deinstalling
a patch. This includes verifying the inventory and shutting down
any services running from the ORACLE_HOME / machine before rolling
the patch back.
2. Change to the directory where the patch was unzipped.
% cd <PATCH_TOP>/8670579
3. Run OPatch to deinstall the patch.
% opatch rollback -id 8670579
注意opatch命令是在$ORACLE_HOME/OPatch/目录下,环境变量PATH中没有包含该目录的话,直接敲入opatch命令是提示找不到改命令的,这时需要将该目录加入到PATH中.
-- The End --
- 大小: 50.8 KB
分享到:
相关推荐
10.6.1使用DBCA配置EM工具 10.6.2使用EMCA创建EM工具 10.6.3 EM工具的日常管理 10.7 CHM集群健康监控 10.7.1 CHM工具介绍 10.7.2 CHM支持的平台及版本 10.7.3 CHM的进程和组件 10.7.4 CHM的基本特性 10.7.5 ...
Linux.x64_11gR2_grid Linux.x64_11gR2_database 1、准备安装环境 2、安装Grid Infrastructure 3、安装Database软件 4、DBCA手动建库 5、验证 1.0、安装操作系统省略 1.1、关闭SELinux、iptables、ntpd,删除或移动...
安装流程:安装VNC—安装JDK—安装Oracle 11g R2—dbca建立数据库
2) 修改host文件或配置DNS解释SCANIP(配置过程如下) 11 3) 配置节点互信(所有节点的基于用户oracle,grid的互信) 12 4) 创建组和用户,加权限 13 5) 用户环境变量配置 13 6) 创建目录,给予目录权限 14 7) 配置...
DBCA创建数据库 安装完成后 备份root.sh 重新编译全部PL/SQL modules 备份spfile文件 RAC集群系统维护命令 启动和关闭集群系统命令 启动集群件和集群数据库 关闭RAC集群数据库和集群件
文档控制 2 目 录 3 一、硬件及软件需求 4 1.1 硬件需求 4 1.2 操作系统环境准备 5 1.3 本地文件系统 5 1.4 存储划分(VMWARE下) 6 二、安装环境准备 15 2.1 网络准备 15 2.2 Oracle database运行环境要求及配置 16...
win10安装Oracle创建数据库实例的时候到85%报出,由于以下错误,Enterprise Manager配置失败,点击确认后显示数据库实例安装成功,但是监听程序TNS一直不能连接本地数据库,用了网上的好多方法都没有解决(win10安装...
2、 设置 ORACLE_BASE 和 ORACLE_HOME 环境变量:.profile 3、 创建挂载点 4、 配置 Shell 限制, 系统需求, 网络参数。 5、 配置 /etc/hosts 6、 配置 rcp 7、 配置裸设备 8、 安装前的检查 第 3 部分:安装软件 1...
第四讲安装11gR2 RAC DB RDBMS HOME数据库软件并DBCA创建数据库 6 Oracle存储结构完全攻略 1:17:00 6 ORACLE_存储网络 6 oracle体系结构1 7 oracle体系结构2 7 Oracle体系结构3 7 Oracle体系结构4 7 Oracle体系...
接上一篇:linux CentOS7最小化安装环境静默安装Oracle11GR2数据库(执行安装_07) 创建ORACLE实例前提,准备下面7项工作 序号 说明 链接 ① 安装操作系统 ...
(2) Oracle 10gR2 RAC数据库公共访问网址建议不使用保留网段的IP地址(如:10.*.*.*、172.16.*.*、192.168.*.*) (3) 每台数据库服务器配置两块千兆网络适配器,一块用于数据库服务器间的私有通信,另一块提供数据库...
Redhat Enterprise linux 5.4 32bit/64bit上安装Oracle10gR2(图文) 解决em/dbca乱码问题 加入oracle随linux自启动
安装好11gR2软件后准备通过dbca创建数据库,执行dbca的时候包如下错误: [Oracle@primary ~]$dbca Oracle Net Services Configuration:...... 需要打的补丁文件p8670579_112010_LINUX.zip;操作步骤可下载压缩文件,有...
1.8使用ssh 把oracle安装文件上传到10gR2_db目录下…….……………...……....7 1.9解压安装文件……………....7 第2章 Linux下安装Oracle数据库…………… .…… ……………………….….....3 2.1 选择安装...