<?xml version="1.0"?>
<!--
Licensed to the Apache Software Foundation (ASF) under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The ASF licenses this file to You under the Apache License, Version 2.0
(the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<!-- Example Server Configuration File -->
<!-- Note that component elements are nested corresponding to their
parent-child relationships with each other -->
<!-- A "Server" is a singleton element that represents the entire JVM,
which may contain one or more "Service" instances. The Server
listens for a shutdown command on the indicated port.
Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<Server port="8005" shutdown="SHUTDOWN">
<!-- Comment these entries out to disable JMX MBeans support used for the
administration web application -->
<Listener className="org.apache.catalina.core.AprLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
<Listener className="org.apache.catalina.storeconfig.StoreConfigLifecycleListener"/>
<!-- Global JNDI resources -->
<GlobalNamingResources>
<!-- Test entry for demonstration purposes -->
<Environment name="simpleValue" type="java.lang.Integer" value="30"/>
<!-- Editable user database that can also be used by
UserDatabaseRealm to authenticate users -->
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
</GlobalNamingResources>
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" (and therefore the web applications visible
within that Container). Normally, that Container is an "Engine",
but this is not required.
Note: A "Service" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<!-- Define the Tomcat Stand-Alone Service -->
<Service name="Catalina">
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Each Connector passes requests on to the
associated "Container" (normally an Engine) for processing.
By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
You can also enable an SSL HTTP/1.1 Connector on port 8443 by
following the instructions below and uncommenting the second Connector
entry. SSL support requires the following steps (see the SSL Config
HOWTO in the Tomcat 5 documentation bundle for more detailed
instructions):
* If your JDK version 1.3 or prior, download and install JSSE 1.0.2 or
later, and put the JAR files into "$JAVA_HOME/jre/lib/ext".
* Execute:
%JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
$JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
with a password value of "changeit" for both the certificate and
the keystore itself.
By default, DNS lookups are enabled when a web application calls
request.getRemoteHost(). This can have an adverse impact on
performance, so you can disable it by setting the
"enableLookups" attribute to "false". When DNS lookups are disabled,
request.getRemoteHost() will return the String version of the
IP address of the remote client.
-->
<!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
<Connector
port="80" maxHttpHeaderSize="8192"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true" />
<!-- Note : To disable connection timeouts, set connectionTimeout value
to 0 -->
<!-- Note : To use gzip compression you could set the following properties :
compression="on"
compressionMinSize="2048"
noCompressionUserAgents="gozilla, traviata"
compressableMimeType="text/html,text/xml"
-->
<!-- Define a SSL HTTP/1.1 Connector on port 8443 -->
<!--
<Connector port="8443" maxHttpHeaderSize="8192"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" disableUploadTimeout="true"
acceptCount="100" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS" />
-->
<!-- Define an AJP 1.3 Connector on port 8009 -->
<Connector port="8009"
enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />
<!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
<!-- See proxy documentation for more information about using this. -->
<!--
<Connector port="8082"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" acceptCount="100" connectionTimeout="20000"
proxyPort="80" disableUploadTimeout="true" />
-->
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host). -->
<!-- You should set jvmRoute to support load-balancing via AJP ie :
<Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1">
-->
<!-- Define the top level container in our container hierarchy -->
<Engine name="Catalina" defaultHost="localhost">
<!-- The request dumper valve dumps useful debugging information about
the request headers and cookies that were received, and the response
headers and cookies that were sent, for all requests received by
this instance of Tomcat. If you care only about requests to a
particular virtual host, or a particular application, nest this
element inside the corresponding <Host> or <Context> entry instead.
For a similar mechanism that is portable to all Servlet 2.4
containers, check out the "RequestDumperFilter" Filter in the
example application (the source for this filter may be found in
"$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
Request dumping is disabled by default. Uncomment the following
element to enable it. -->
<!--
<Valve className="org.apache.catalina.valves.RequestDumperValve"/>
-->
<!-- Because this Realm is here, an instance will be shared globally -->
<!-- This Realm uses the UserDatabase configured in the global JNDI
resources under the key "UserDatabase". Any edits
that are performed against this UserDatabase are immediately
available for use by the Realm. -->
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>
<!-- Comment out the old realm but leave here for now in case we
need to go back quickly -->
<!--
<Realm className="org.apache.catalina.realm.MemoryRealm" />
-->
<!-- Replace the above Realm with one of the following to get a Realm
stored in a database and accessed via JDBC -->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="org.gjt.mm.mysql.Driver"
connectionURL="jdbc:mysql://localhost/authority"
connectionName="test" connectionPassword="test"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="oracle.jdbc.driver.OracleDriver"
connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
connectionName="scott" connectionPassword="tiger"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="sun.jdbc.odbc.JdbcOdbcDriver"
connectionURL="jdbc:odbc:CATALINA"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!-- Define the default virtual host
Note: XML Schema validation will not work with Xerces 2.2.
-->
<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">
<!-- Defines a cluster for this node,
By defining this element, means that every manager will be changed.
So when running a cluster, only make sure that you have webapps in there
that need to be clustered and remove the other ones.
A cluster has the following parameters:
className = the fully qualified name of the cluster class
name = a descriptive name for your cluster, can be anything
mcastAddr = the multicast address, has to be the same for all the nodes
mcastPort = the multicast port, has to be the same for all the nodes
mcastBindAddr = bind the multicast socket to a specific address
mcastTTL = the multicast TTL if you want to limit your broadcast
mcastSoTimeout = the multicast readtimeout
mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat
mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received
tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes
tcpListenAddress = the listen address (bind address) for TCP cluster request on this host,
in case of multiple ethernet cards.
auto means that address becomes
InetAddress.getLocalHost().getHostAddress()
tcpListenPort = the tcp listen port
tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS
has a wakup bug in java.nio. Set to 0 for no timeout
printToScreen = true means that managers will also print to std.out
expireSessionsOnShutdown = true means that
useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called.
false means to replicate the session after each request.
false means that replication would work for the following piece of code: (only for SimpleTcpReplicationManager)
<%
HashMap map = (HashMap)session.getAttribute("map");
map.put("key","value");
%>
replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'.
* Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication.
* Synchronous means that the thread that executes the request, is also the
thread the replicates the data to the other nodes, and will not return until all
nodes have received the information.
* Asynchronous means that there is a specific 'sender' thread for each cluster node,
so the request thread will queue the replication request into a "smart" queue,
and then return to the client.
The "smart" queue is a queue where when a session is added to the queue, and the same session
already exists in the queue from a previous request, that session will be replaced
in the queue instead of replicating two requests. This almost never happens, unless there is a
large network delay.
-->
<!--
When configuring for clustering, you also add in a valve to catch all the requests
coming in, at the end of the request, the session may or may not be replicated.
A session is replicated if and only if all the conditions are met:
1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND
2. a session exists (has been created)
3. the request is not trapped by the "filter" attribute
The filter attribute is to filter out requests that could not modify the session,
hence we don't replicate the session after the end of this request.
The filter is negative, ie, anything you put in the filter, you mean to filter out,
ie, no replication will be done on requests that match one of the filters.
The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to.
filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI
ending with .gif and .js are intercepted.
The deployer element can be used to deploy apps cluster wide.
Currently the deployment only deploys/undeploys to working members in the cluster
so no WARs are copied upons startup of a broken node.
The deployer watches a directory (watchDir) for WAR files when watchEnabled="true"
When a new war file is added the war gets deployed to the local instance,
and then deployed to the other instances in the cluster.
When a war file is deleted from the watchDir the war is undeployed locally
and cluster wide
-->
<!--
<Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster"
managerClassName="org.apache.catalina.cluster.session.DeltaManager"
expireSessionsOnShutdown="false"
useDirtyFlag="true"
notifyListenersOnReplication="true">
<Membership
className="org.apache.catalina.cluster.mcast.McastService"
mcastAddr="228.0.0.4"
mcastPort="45564"
mcastFrequency="500"
mcastDropTime="3000"/>
<Receiver
className="org.apache.catalina.cluster.tcp.ReplicationListener"
tcpListenAddress="auto"
tcpListenPort="4001"
tcpSelectorTimeout="100"
tcpThreadCount="6"/>
<Sender
className="org.apache.catalina.cluster.tcp.ReplicationTransmitter"
replicationMode="pooled"
ackTimeout="15000"/>
<Valve className="org.apache.catalina.cluster.tcp.ReplicationValve"
filter=".*\.gif;.*\.js;.*\.jpg;.*\.htm;.*\.html;.*\.txt;"/>
<Deployer className="org.apache.catalina.cluster.deploy.FarmWarDeployer"
tempDir="/tmp/war-temp/"
deployDir="/tmp/war-deploy/"
watchDir="/tmp/war-listen/"
watchEnabled="false"/>
</Cluster>
-->
<!-- Normally, users must authenticate themselves to each web app
individually. Uncomment the following entry if you would like
a user to be authenticated the first time they encounter a
resource protected by a security constraint, and then have that
user identity maintained across *all* web applications contained
in this virtual host. -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn" />
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
-->
<!--
<Valve className="org.apache.catalina.valves.AccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
This access log implementation is optimized for maximum performance,
but is hardcoded to support only the "common" and "combined" patterns.
-->
<!--
<Valve className="org.apache.catalina.valves.FastCommonAccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<Context path="" docBase="E:\Tomcat 5.5\webapps\3gmall" workDir="E:\Tomcat 5.5\work\Catalina\localhost\3gmall"/>
</Host>
<Host name="www.123.com" debug="0">
<Context path="" docBase="E:\Tomcat 5.5\webapps\3gmall" debug="0"></Context>
</Host>
<Host name="www.456.com" debug="0">
<Context path="" docBase="E:\Tomcat 5.5\webapps\3ghaoma" debug="0"></Context>
</Host>
</Engine>
</Service>
</Server>
分享到:
相关推荐
为tomcat服务器配置https,tomcat需要设置的server.xml与web.xml配置。可以帮助小白为tomcat服务器配置https协议(域名)。
tomcat server.xml配置;1:支持虚目录,如上传的文件放置到tomcat webapp置为的目录 2:配置https 3:配置多域名
server.xml主要用来控制tomcat的运行,jboss的web容器其实是对tomcat的封装,一般在jboss\server\default\deploy\jbossweb-tomcat.sar目录下。
tomcat配置多域名访问同一个服务下的多目录server。文件在一个tomcat中部署多个web应用。
现在很多的公司的网站都是用tomcat作为应用服务区的,可是对于初学者,8080端口号是如何去掉的,这些网站是如何和域名绑定到一起的呢?一个tomcat是如何绑定多域名?并且这些域名是如何对应不同的项目呢?而且我的...
tomcat5.5.X域名转向和连接池配置的server.xml文件,用于项目的部署,绝对使用,不用再暴走baidu和google
Tomcat配置文件server.xml进行多域名多服务的相关配置,以实际生产环境为例进行配置操作。适合一台服务器运行多个项目的小伙伴进行参考配置
TOMCAT多站点配置 1 打开tomcat/conf/server.xml,在里面找到<Engine name="Catalina" defaultHost="localhost">..... 2 在<Engine name="Catalina" defaultHost="localhost"></Engine>中间加入内容: ............
这就需要在tomcat里配置多域名,添加多个虚拟主机。 主要在server.xml里面设置: 在<Engine></Engine>里面添加两个<Host></Host>标签,内容如下: <Host name=www.123.com appBase=/usr/local/tomcat/webapps/123 ...
tomcat配置只能域名访问禁止ip访问 直接替换tomcat里面的server.xml 文件,但是里面的ip要更换你自己的ip
https ssl Tomcat中实现https安全连接与SSL配置https ssl Tomcat中实现https安全连接与SSL配置https ssl Tomcat中实现https安全连接与SSL配置https ssl Tomcat中实现https安全连接与SSL配置
一个Tomcat上部署多个项目 通过配置实现 不同的域名 不同端口 访问不同内容https://blog.csdn.net/qq_36068521/article/details/103583226
打开Tomcat根目录下的/conf/server.xml,找到如下配置段,修改如下: maxThreads="150" scheme="https" secure="true" clientAuth="true" sslProtocol="TLS" keystoreFile="C:/tmp/tomcat.keystore" ...
APACHE 2.2.9+TOMCAT6.0.18配置负载均衡 目标: 使用 apache 和 tomcat 配置一个可以应用的 web 网站,要达到以下要求: 1、 Apache 做为 HttpServer ,后面连接多个 tomcat 应用实例,并进行负载均衡。 2、 为系统...
2、进行步骤1中的配置,多端口就完成了,保存并启动tomcat。 使用8080端口访问的效果图: 3、使用9090端口访问的效果图: 这样,就实现了不同的端口号访问到同一个应用程序了。如果还想在其他端口进行监听,就把...
修改或增加WEB-INF\classes\mailserver.xml文件中的data节点的内容,可以修改或增加域名。mailserver.xml文件的data节点数据格式如下: <data domain="21cn....
tomcat采用默认安装,要想tamcat直接绑定多个域名,这里我们需要修改配置文件:C:\Program Files\Apache Software Foundation\Tomcat 5.5\conf\server.xml server.xml 的修改方式如下: (一)多域名绑定 1.如果你要绑定...
打开tomcat的解压之后的目录可以看到如下的目录结构: 1.Tomcat的bin目录: bin目录主要是用来存放tomcat的命令,主要有两大类,一类是以.sh结尾的(linux命令),另一...server.xml可以设置端口号、设置域名或IP、
2.2.2.1 将cacerts文件复制到TOMCAT的conf目录下修改server.xml connectionTimeout="20000" redirectPort="443" /> enableLookups="true" disableUploadTimeout="true" acceptCount="100" maxThreads="200" ...
数字证书生成doc命令 1.1生成服务端证书 开始-运行-CMD-在dos窗口执行下执行命令: keytool -genkey -v -alias tomcat -keyalg RSA -keystore C:/self-file/server/... 2.1 配置Tomcat 目录下的/conf/server.xml