- 浏览: 403638 次
- 性别:
- 来自: 北京
文章分类
最新评论
-
冯大圆__渐成胡子渣:
写得很详细,想请求一下,bundler install的时候设 ...
Rails Assets Pipeline -
DaSunWarman:
...
#!/usr/bin/env 脚本解释程序的作用 -
alexag:
...
javascript立即执行函数与函数声明和函数表达式 -
houxm:
你也可以使用更简单的方式(只要在元素上添加 data-togg ...
bootstrap 小tip -
jaycongwen:
帮我看看啊,我刚学wen@wen-desktop:~$ cd ...
cannot load such file -- openssl
Nginx 使用 Unix 下常用的 './configure && make && make install' 过程来编译安装。
configure 脚本确定系统所具有一些特性,特别是 nginx 用来处理连接的方法。然后,它创建 Makefile 文件。
configure 支持下面的选项:
--prefix=<path> - Nginx安装路径。如果没有指定,默认为 /usr/local/nginx。
--sbin-path=<path> - Nginx可执行文件安装路径。只能安装时指定,如果没有指定,默认为<prefix>/sbin/nginx。
--conf-path=<path> - 在没有给定-c选项下默认的nginx.conf的路径。如果没有指定,默认为<prefix>/conf/nginx.conf。
--pid-path=<path> - 在nginx.conf中没有指定pid指令的情况下,默认的nginx.pid的路径。如果没有指定,默认为 <prefix>/logs/nginx.pid。
--lock-path=<path> - nginx.lock文件的路径。
--error-log-path=<path> - 在nginx.conf中没有指定error_log指令的情况下,默认的错误日志的路径。如果没有指定,默认为 <prefix>/logs/error.log。
--http-log-path=<path> - 在nginx.conf中没有指定access_log指令的情况下,默认的访问日志的路径。如果没有指定,默认为 <prefix>/logs/access.log。
--user=<user> - 在nginx.conf中没有指定user指令的情况下,默认的nginx使用的用户。如果没有指定,默认为 nobody。
--group=<group> - 在nginx.conf中没有指定user指令的情况下,默认的nginx使用的组。如果没有指定,默认为 nobody。
--builddir=DIR - 指定编译的目录
--with-rtsig_module - 启用 rtsig 模块
--with-select_module --without-select_module - Whether or not to enable the select module. This module is enabled by default if a more suitable method such as kqueue, epoll, rtsig or /dev/poll is not discovered by configure.
//允许或不允许开启SELECT模式,如果 configure 没有找到更合适的模式,比如:kqueue(sun os),epoll (linux kenel 2.6+), rtsig(实时信号)或者/dev/poll(一种类似select的模式,底层实现与SELECT基本相 同,都是采用轮训方法) SELECT模式将是默认安装模式
--with-poll_module --without-poll_module - Whether or not to enable the poll module. This module is enabled by default if a more suitable method such as kqueue, epoll, rtsig or /dev/poll is not discovered by configure.
--with-http_ssl_module - Enable ngx_http_ssl_module. Enables SSL support and the ability to handle HTTPS requests. Requires OpenSSL. On Debian, this is libssl-dev.
//开启HTTP SSL模块,使NGINX可以支持HTTPS请求。这个模块需要已经安装了OPENSSL,在DEBIAN上是libssl
--with-http_realip_module - 启用 ngx_http_realip_module
--with-http_addition_module - 启用 ngx_http_addition_module
--with-http_sub_module - 启用 ngx_http_sub_module
--with-http_dav_module - 启用 ngx_http_dav_module
--with-http_flv_module - 启用 ngx_http_flv_module
--with-http_stub_status_module - 启用 "server status" 页
--without-http_charset_module - 禁用 ngx_http_charset_module
--without-http_gzip_module - 禁用 ngx_http_gzip_module. 如果启用,需要 zlib 。
--without-http_ssi_module - 禁用 ngx_http_ssi_module
--without-http_userid_module - 禁用 ngx_http_userid_module
--without-http_access_module - 禁用 ngx_http_access_module
--without-http_auth_basic_module - 禁用 ngx_http_auth_basic_module
--without-http_autoindex_module - 禁用 ngx_http_autoindex_module
--without-http_geo_module - 禁用 ngx_http_geo_module
--without-http_map_module - 禁用 ngx_http_map_module
--without-http_referer_module - 禁用 ngx_http_referer_module
--without-http_rewrite_module - 禁用 ngx_http_rewrite_module. 如果启用需要 PCRE 。
--without-http_proxy_module - 禁用 ngx_http_proxy_module
--without-http_fastcgi_module - 禁用 ngx_http_fastcgi_module
--without-http_memcached_module - 禁用 ngx_http_memcached_module
--without-http_limit_zone_module - 禁用 ngx_http_limit_zone_module
--without-http_empty_gif_module - 禁用 ngx_http_empty_gif_module
--without-http_browser_module - 禁用 ngx_http_browser_module
--without-http_upstream_ip_hash_module - 禁用 ngx_http_upstream_ip_hash_module
--with-http_perl_module - 启用 ngx_http_perl_module
--with-perl_modules_path=PATH - 指定 perl 模块的路径
--with-perl=PATH - 指定 perl 执行文件的路径
--http-log-path=PATH - Set path to the http access log
--http-client-body-temp-path=PATH - Set path to the http client request body temporary files
--http-proxy-temp-path=PATH - Set path to the http proxy temporary files
--http-fastcgi-temp-path=PATH - Set path to the http fastcgi temporary files
--without-http - 禁用 HTTP server
--with-mail - 启用 IMAP4/POP3/SMTP 代理模块
--with-mail_ssl_module - 启用 ngx_mail_ssl_module
--with-cc=PATH - 指定 C 编译器的路径
--with-cpp=PATH - 指定 C 预处理器的路径
--with-cc-opt=OPTIONS - Additional parameters which will be added to the variable CFLAGS. With the use of the system library PCRE in FreeBSD, it is necessary to indicate --with-cc-opt="-I /usr/local/include". If we are using select() and it is necessary to increase the number of file descriptors, then this also can be assigned here: --with-cc-opt="-D FD_SETSIZE=2048".
--with-ld-opt=OPTIONS - Additional parameters passed to the linker. With the use of the system library PCRE in FreeBSD, it is necessary to indicate --with-ld-opt="-L /usr/local/lib".
--with-cpu-opt=CPU - 为特定的 CPU 编译,有效的值包括:pentium, pentiumpro, pentium3, pentium4, athlon, opteron, amd64, sparc32, sparc64, ppc64
--without-pcre - 禁止 PCRE 库的使用。同时也会禁止 HTTP rewrite 模块。在 "location" 配置指令中的正则表达式也需要 PCRE 。
--with-pcre=DIR - 指定 PCRE 库的源代码的路径。
--with-pcre-opt=OPTIONS - Set additional options for PCRE building.
--with-md5=DIR - Set path to md5 library sources.
--with-md5-opt=OPTIONS - Set additional options for md5 building.
--with-md5-asm - Use md5 assembler sources.
--with-sha1=DIR - Set path to sha1 library sources.
--with-sha1-opt=OPTIONS - Set additional options for sha1 building.
--with-sha1-asm - Use sha1 assembler sources.
--with-zlib=DIR - Set path to zlib library sources.
--with-zlib-opt=OPTIONS - Set additional options for zlib building.
--with-zlib-asm=CPU - Use zlib assembler sources optimized for specified CPU, valid values are: pentium, pentiumpro
--with-openssl=DIR - Set path to OpenSSL library sources
--with-openssl-opt=OPTIONS - Set additional options for OpenSSL building
--with-debug - 启用调试日志
--add-module=PATH - Add in a third-party module found in directory PATH
在不同版本间,选项可能会有些许变化,请总是使用 ./configure --help 命令来检查一下当前的选项列表。
configure 脚本确定系统所具有一些特性,特别是 nginx 用来处理连接的方法。然后,它创建 Makefile 文件。
configure 支持下面的选项:
--prefix=<path> - Nginx安装路径。如果没有指定,默认为 /usr/local/nginx。
--sbin-path=<path> - Nginx可执行文件安装路径。只能安装时指定,如果没有指定,默认为<prefix>/sbin/nginx。
--conf-path=<path> - 在没有给定-c选项下默认的nginx.conf的路径。如果没有指定,默认为<prefix>/conf/nginx.conf。
--pid-path=<path> - 在nginx.conf中没有指定pid指令的情况下,默认的nginx.pid的路径。如果没有指定,默认为 <prefix>/logs/nginx.pid。
--lock-path=<path> - nginx.lock文件的路径。
--error-log-path=<path> - 在nginx.conf中没有指定error_log指令的情况下,默认的错误日志的路径。如果没有指定,默认为 <prefix>/logs/error.log。
--http-log-path=<path> - 在nginx.conf中没有指定access_log指令的情况下,默认的访问日志的路径。如果没有指定,默认为 <prefix>/logs/access.log。
--user=<user> - 在nginx.conf中没有指定user指令的情况下,默认的nginx使用的用户。如果没有指定,默认为 nobody。
--group=<group> - 在nginx.conf中没有指定user指令的情况下,默认的nginx使用的组。如果没有指定,默认为 nobody。
--builddir=DIR - 指定编译的目录
--with-rtsig_module - 启用 rtsig 模块
--with-select_module --without-select_module - Whether or not to enable the select module. This module is enabled by default if a more suitable method such as kqueue, epoll, rtsig or /dev/poll is not discovered by configure.
//允许或不允许开启SELECT模式,如果 configure 没有找到更合适的模式,比如:kqueue(sun os),epoll (linux kenel 2.6+), rtsig(实时信号)或者/dev/poll(一种类似select的模式,底层实现与SELECT基本相 同,都是采用轮训方法) SELECT模式将是默认安装模式
--with-poll_module --without-poll_module - Whether or not to enable the poll module. This module is enabled by default if a more suitable method such as kqueue, epoll, rtsig or /dev/poll is not discovered by configure.
--with-http_ssl_module - Enable ngx_http_ssl_module. Enables SSL support and the ability to handle HTTPS requests. Requires OpenSSL. On Debian, this is libssl-dev.
//开启HTTP SSL模块,使NGINX可以支持HTTPS请求。这个模块需要已经安装了OPENSSL,在DEBIAN上是libssl
--with-http_realip_module - 启用 ngx_http_realip_module
--with-http_addition_module - 启用 ngx_http_addition_module
--with-http_sub_module - 启用 ngx_http_sub_module
--with-http_dav_module - 启用 ngx_http_dav_module
--with-http_flv_module - 启用 ngx_http_flv_module
--with-http_stub_status_module - 启用 "server status" 页
--without-http_charset_module - 禁用 ngx_http_charset_module
--without-http_gzip_module - 禁用 ngx_http_gzip_module. 如果启用,需要 zlib 。
--without-http_ssi_module - 禁用 ngx_http_ssi_module
--without-http_userid_module - 禁用 ngx_http_userid_module
--without-http_access_module - 禁用 ngx_http_access_module
--without-http_auth_basic_module - 禁用 ngx_http_auth_basic_module
--without-http_autoindex_module - 禁用 ngx_http_autoindex_module
--without-http_geo_module - 禁用 ngx_http_geo_module
--without-http_map_module - 禁用 ngx_http_map_module
--without-http_referer_module - 禁用 ngx_http_referer_module
--without-http_rewrite_module - 禁用 ngx_http_rewrite_module. 如果启用需要 PCRE 。
--without-http_proxy_module - 禁用 ngx_http_proxy_module
--without-http_fastcgi_module - 禁用 ngx_http_fastcgi_module
--without-http_memcached_module - 禁用 ngx_http_memcached_module
--without-http_limit_zone_module - 禁用 ngx_http_limit_zone_module
--without-http_empty_gif_module - 禁用 ngx_http_empty_gif_module
--without-http_browser_module - 禁用 ngx_http_browser_module
--without-http_upstream_ip_hash_module - 禁用 ngx_http_upstream_ip_hash_module
--with-http_perl_module - 启用 ngx_http_perl_module
--with-perl_modules_path=PATH - 指定 perl 模块的路径
--with-perl=PATH - 指定 perl 执行文件的路径
--http-log-path=PATH - Set path to the http access log
--http-client-body-temp-path=PATH - Set path to the http client request body temporary files
--http-proxy-temp-path=PATH - Set path to the http proxy temporary files
--http-fastcgi-temp-path=PATH - Set path to the http fastcgi temporary files
--without-http - 禁用 HTTP server
--with-mail - 启用 IMAP4/POP3/SMTP 代理模块
--with-mail_ssl_module - 启用 ngx_mail_ssl_module
--with-cc=PATH - 指定 C 编译器的路径
--with-cpp=PATH - 指定 C 预处理器的路径
--with-cc-opt=OPTIONS - Additional parameters which will be added to the variable CFLAGS. With the use of the system library PCRE in FreeBSD, it is necessary to indicate --with-cc-opt="-I /usr/local/include". If we are using select() and it is necessary to increase the number of file descriptors, then this also can be assigned here: --with-cc-opt="-D FD_SETSIZE=2048".
--with-ld-opt=OPTIONS - Additional parameters passed to the linker. With the use of the system library PCRE in FreeBSD, it is necessary to indicate --with-ld-opt="-L /usr/local/lib".
--with-cpu-opt=CPU - 为特定的 CPU 编译,有效的值包括:pentium, pentiumpro, pentium3, pentium4, athlon, opteron, amd64, sparc32, sparc64, ppc64
--without-pcre - 禁止 PCRE 库的使用。同时也会禁止 HTTP rewrite 模块。在 "location" 配置指令中的正则表达式也需要 PCRE 。
--with-pcre=DIR - 指定 PCRE 库的源代码的路径。
--with-pcre-opt=OPTIONS - Set additional options for PCRE building.
--with-md5=DIR - Set path to md5 library sources.
--with-md5-opt=OPTIONS - Set additional options for md5 building.
--with-md5-asm - Use md5 assembler sources.
--with-sha1=DIR - Set path to sha1 library sources.
--with-sha1-opt=OPTIONS - Set additional options for sha1 building.
--with-sha1-asm - Use sha1 assembler sources.
--with-zlib=DIR - Set path to zlib library sources.
--with-zlib-opt=OPTIONS - Set additional options for zlib building.
--with-zlib-asm=CPU - Use zlib assembler sources optimized for specified CPU, valid values are: pentium, pentiumpro
--with-openssl=DIR - Set path to OpenSSL library sources
--with-openssl-opt=OPTIONS - Set additional options for OpenSSL building
--with-debug - 启用调试日志
--add-module=PATH - Add in a third-party module found in directory PATH
在不同版本间,选项可能会有些许变化,请总是使用 ./configure --help 命令来检查一下当前的选项列表。
发表评论
-
#!/usr/bin/env 脚本解释程序的作用
2014-02-08 14:59 25655#!/usr/bin/env 在linux的一些bash的脚本 ... -
vim 分屏方法
2012-02-25 01:21 1775使用分屏命令: :new 创建空白分屏 :split 对当 ... -
用sudo提高脚本程序的权限
2011-09-18 23:45 3201用sudo提高脚本程序的权限 一,为什么要用sudo? ... -
ubuntu开启SSH服务
2011-09-16 11:09 1378SSH分客户端openssh-client和openssh-s ... -
Ubuntu Linux系统下apt-get命令详解
2011-09-16 02:28 1062整理了Ubuntu Linux操作系统下apt-get命令的详 ... -
Unable to lock the administration directory (/var/lib/dpkg/), is another process
2011-09-16 02:17 6151通过终端安装程序sudo apt-get install ** ... -
linux sh,bin文件的安装方法
2011-09-11 13:00 2138记下在Ubuntu下安装*.sh和*.bin的简单方法。 * ... -
nginx高并发配置
2011-08-23 21:38 1410nginx配置及说明: worker_processes 8 ... -
linux shell 简单介绍
2011-08-21 20:55 1520Linux 系统结构: 硬件->Kernel(驱动程序 ... -
RPM APT YUM
2011-08-05 02:04 2484RPM 是 Red Hat Package Manager ... -
unix shebang 符号
2011-11-22 22:09 1605在计算机科学中,Shebang(也称为Hashbang)是一个 ... -
ubuntu安装nginx+passenger
2011-07-13 00:07 22091、安装passenger gem install passe ... -
/etc/profile 和/etc/environment
2011-07-06 01:07 2008先将export LANG=zh_CN加入/etc/profi ... -
第一次使用ubuntu11.0.4
2011-07-05 00:51 1252因为是第一次使用ubuntu11.0.4,所以对 ... -
linux 下memcached安装配置
2011-06-29 17:58 1421最近在研究怎么让Discuz!去应用Memcache去做一些事 ... -
linux 家目录下的.bashrc 与.profile文件的区别
2011-06-29 17:45 3384今天在干活时因为经常要重启nginx服务器,命令实在是冗长麻烦 ... -
添加非root用户为sudo用户
2011-04-13 14:33 2952第一种方法: 添加sudo ... -
Linux下cron的使用
2011-04-07 23:16 939cron是一个linux下的定时 ... -
关于初次使用ubuntu的相关记录
2011-03-19 01:29 955初次接触ubuntu的时候啥也不知道,所以总是什么都是一塌糊涂 ...
相关推荐
1 : wget下载: ...4 : 进行configure配置:cd nginx-1.6.2 && ./configure --prefix=/usr/local/nginx 查看是否报错 5 : 编译安装 make && make install 6 : 启动Nginx: 。。。。。。
Nginx编译参数:./configure –help–help 显示本提示信息–prefix=PATH 设定安装目录–sbin-path=PATH 设定程序文件目录–conf-path=PATH 设定配置文件(nginx.conf)目录–error-log-path=PATH 设定错误日志目录–...
1.下载依赖软件 pcre:perl正则表达式的兼容工具 ...yum install -y pcre-devel openssl-devel ...参数配置:./configure –prefix=/application/nginx-1.18 –user=www –group=www –with-http_opens
一、Linux下安装配置nginx 第一次安装nginx,中间出现的问题一步步解决。 用到的工具secureCRT,连接并登录服务器。 1.1 rz命令,会弹出会话框,选择要上传的nginx压缩包。 #rz 1.2 解压 [root@vw010001135067 ~...
其将源代码以类BSD许可证的形式发布,因它的稳定性、丰富的功能集、示例配置文件和低系统资源的消耗而闻名。 CentOS 7 条件 教程中的步骤需要root用户权限。 一、添加Nginx到YUM源 添加CentOS 7 Nginx yum资源库,...
./configure --prefix=/usr/local/nginx --with-http_ssl_module 以上命令将nginx安装到usr/local/nginx目录下,并启动ssl功能。事先确保服务器已安装open-ssl包,如没安装可用如下命令在线安装: yum
最近项目中涉及到旧老项目迁移,需要在nginx上做些配置,所以简单学习了下,好记性不如烂笔头,先记下来。 rewrite 首先查看下nginx是否支持rewrite: ./nginx -V 不支持说明安装nginx时候缺少pcre,需要重新安装...
NGINX版本:nginx version: nginx/1.9.8 PHP版本:PHP 7.0.0 (cli) (built: Dec 1 2015 17:53:27) ( NTS ) mysql版本:mysqld Ver 5.7.10 phpmyadmin版本:4.5.2-all-languages 部署完phpmyadmin,访问主页报错: ...
本机Nginx安装时的配置参数 ./configure \ --prefix=/usr/local/nginx \ --pid-path=/usr/local/nginx/logs/nginx.pid \ --lock-path=/var/lock/nginx.lock \ --error-log-path=/var/log/nginx/error.log \ --...
-prefix=/usr/local/nginx –with-pcre=/home/soft/pcre-8.30 –with-openssl=/home/soft/openssl-1.0.2g –add-module=../nginx_tcp_proxy_module-master 如果安装中出现: configure: error: zlib library not ...
说明:软件安装的基础目录路径:/usr/local 所以下载软件的时候切换到此目录下下载直接解压即可 1.安装gcc gcc-c++依赖包 yum install -y gcc gcc-c++ 2.下载编译安装PCRE库 ..../configure make && make install 3
本文会介绍一些 Nginx 与 Libressl 一起使用实践...$ ./configure --prefix=/usr LDFLAGS=-lrt && make check && sudo make install 新安装的 LibreSSL 可替代openssl以相同的方式运行,但要注意:正如 sabotage-linux
本文介绍其配置方式。 安装模块 若要启用 ngx_brotli 模块,需要在编译 Nginx 时,加入相应模块: # get source git clone https://github.com/google/ngx_brotli.git cd ngx_brotli git submodule update --init ...
下面为大家介绍google-perftools的安装,并配置Nginx和MySQL支持google-perftools。 首先,介绍如何优化Nginx: 1,首先下载并安装google-perftools: 注意,如果是64位系统: 那么你需要做:1)先安装libunwind或者2)在...
eAccelerator 配置参数详解: http://www.oaxueyuan.com/eaccelerator-configuration-parameters-explain.html 下面是文字版,如果您无法上网,可以参考下面资料: 在Windows环境下编译、配置 eAccelerator 加速...