FastDFS安装使用实战二(配置篇)
Keywords:FastDFS、分布式文件系统、Ubuntu
Author:soartju
转载请注明出处:http://soartju.iteye.com/blog/803524
FastDFS的配置文件在%FastDFS%/conf目录下,其中包括
Client.conf 客户端上传配置文件
Storage.conf 文件存储服务器配置文件
Tracker.conf 负责均衡调度服务器配置文件
http.conf http服务器配置文件
配置文件需要根据服务器环境的不同,进行不同的配置,具体可以参考FastDFS官方的安装配置文档http://code.google.com/p/fastdfs/wiki/Setup,以及FastDFS原理介绍文档http://code.google.com/p/fastdfs/wiki/Overview
在本例中,Tracker Server,Storage Server都安装在一台服务器上,IP:10.0.2.15
1、配置及启动Tracker Server
A、修改%FastDFS%/conf/tracker.conf文件,修改如下
#可以自己指定目录位置,但目录必须存在,用于存储日志及storage server等信息,否则tracker server无法启动
base_path=/home/yuqing/fastdfs -> base_path=/home/soar/fastdfs_tracker
#改成你想要的http端口,将来http下载文件的端口就是他了
http.server_port=8080 -> http.server_port=8090
#http支持
##include http.conf -> #include http.conf
#默认4GB,如果空间不足,建议调小,否则会报no free space的异常,无法正常启动
reserved_storage_space = 4GB -> reserved_storage_space = 1GB
#tracker server对storage server供服务的端口,使用默认的即可,也可以自定义
port=22122
B、将http.conf文件拷贝到/etc/fdfs目录下,执行
sudo cp %FastDFS%/conf/http.conf /etc/fdfs/
注:为了支持http,必须将这个文件拷贝到此目录,否则无法启动,报param http.XXX not exist or is empty类似的错误
C、进入/usr/local/bin/目录,启动tracker服务器,执行
sudo fdfs_trackerd %FastDFS%/conf/tracker.conf
D、进入/home/soar/fastdfs_tracker/logs/trackerd.log查看tracker的启动日志,如果看到类似
[2010-11-04 16:21:25] INFO - FastDFS v2.02, base_path=/home/soar/fastdfs_tracker, connect_timeout=30s, network_timeout=60s, port=22122, bind_addr=, max_connections=256, work_threads=4, store_lookup=2, store_group=, store_server=0, store_path=0, reserved_storage_space=4MB, download_server=0, allow_ip_count=-1, sync_log_buff_interval=10s, check_active_interval=120s, thread_stack_size=64 KB, storage_ip_changed_auto_adjust=1, storage_sync_file_max_delay=86400s, storage_sync_file_max_time=300s
[2010-11-04 16:21:25] INFO - HTTP supported: server_port=8090, default_content_type=application/octet-stream, anti_steal_token=0, token_ttl=0s, anti_steal_secret_key length=0, token_check_fail content_type=, token_check_fail buff length=0, check_active_interval=30, check_active_type=tcp, check_active_uri=/status.html
恭喜你,tracker server已经启动成功!
2、配置及启动Storage Server
A、修改%FastDFS%/conf/storage.conf文件,修改如下:
#可以自定义,但必须存在此目录,用于存储storage相关的log、group内的相关信息
base_path=/home/yuqing/fastdfs -> /home/soar/fastdfs_storge
#文件的存储位置,在一台storage server上可以指定多个存储位置
store_path0=/home/yuqing/fastdfs -> store_path0=/home/soar/fastdfs_storge
#必须指定
group_name=group1
#修改成tracker server的IP和端口信息
tracker_server=192.168.209.121:22122 -> tracker_server=10.0.2.15:22122
#http支持
##include http.conf ->#include http.conf
B、进入/usr/local/bin/目录,启动storage服务器,执行
sudo fdfs_storaged %FastDFS%/conf/storage.conf
C、进入/home/soar/fastdfs_tracker/logs/storage.log查看storage服务器启动日志,如果看到类似
[2010-11-04 16:37:16] INFO - FastDFS v2.02, base_path=/home/soar/fastdfs_storge, store_path_count=1, subdir_count_per_path=256, group_name=group1, connect_timeout=30s, network_timeout=60s, port=23000, bind_addr=, client_bind=1, max_connections=256, work_threads=4, disk_rw_separated=1, disk_reader_threads=1, disk_writer_threads=1, buff_size=256KB, heart_beat_interval=30s, stat_report_interval=60s, tracker_server_count=1, sync_wait_msec=200ms, sync_interval=0ms, sync_start_time=00:00, sync_end_time=23:59, write_mark_file_freq=500, allow_ip_count=-1, file_distribute_path_mode=0, file_distribute_rotate_count=100, fsync_after_written_bytes=0, sync_log_buff_interval=10s, sync_binlog_buff_interval=60s, sync_stat_file_interval=300s, thread_stack_size=512 KB, upload_priority=10, if_alias_prefix=, check_file_duplicate=0, FDHT group count=0, FDHT server count=0, FDHT key_namespace=, FDHT keep_alive=0, HTTP server port=8888, domain name=
[2010-11-04 16:37:16] INFO - HTTP supported: server_port=8888, http_trunk_size=262144, default_content_type=application/octet-stream, anti_steal_token=0, token_ttl=0s, anti_steal_secret_key length=0, token_check_fail content_type=, token_check_fail buff length=0
[2010-11-04 16:37:16] INFO - file: storage_param_getter.c, line: 48, storage_ip_changed_auto_adjust=1
[2010-11-04 16:37:19] INFO - file: tracker_client_thread.c, line: 274, successfully connect to tracker server 10.0.2.15:22122, as a tracker client, my ip is 10.0.2.15
恭喜你,storage server已经启动成功!
相关博文
FastDFS安装使用实战一(安装篇)
FastDFS安装使用实战三(使用篇)
分享到:
相关推荐
FastDFS安装和配置过程
fastdfs 安装及使用,里面包含了fastdfs安装需要的软件,以及java-api工程,和使用实例
对于文章【高可用架构篇:【5】FastDFS集群的安装、配置、使用】需要使用的文件包
Redhat下Fastdfs安装配置及nginx模块安装配置文档.pdf
FastDFS和Linux下安装使用FastDFS 安装Nginx 分布式文件系统
NULL 博文链接:https://josh-persistence.iteye.com/blog/2067574
FastDFS+Nginx 安装及配置。FastDFS 是一个开源的轻量级分布式文件系统,纯 C 实现,支持 Linux、FreeBSD 等 UNIX 系统,FastDFS 可以看做是基于文件的 key value pair 存储系统,包含两个角色,分别为跟踪 服务器...
FastDFS分布式存储介绍
fastdfs的安装手册说明+配置文件+fastdfs安装包+nginx安装包,压缩包内是自己结合网上资料整理的fastdfs的全套配置及说明,已成功安装并运行
FastDFS分布式存储实战
FastDFS 安装,配置及API和使用说明。
fastdfs基本原理讲解,以及如何在linux下安装测试,对于集群的安装部署不涉及,docker安装不涉及,可参看博客内容
fastDFS 安装文件 fastDFS 安装文件fastDFS 安装文件 fastDFS 安装文件fastDFS 安装文件 fastDFS 安装文件
fastdfs 安装配置所需的安装包 FastDFS_v5.02.tar.gz fastdfs-nginx-module_v1.15.tar.gz nginx-1.4.7.tar.gz ngx_cache_purge-2.1.tar.gz pcre-8.34.tar.gz zlib-1.2.8.tar.gz 安装方法:...
fastdfs安装所有需要的程序,包括fastdfs安装包, niginx fastdfs-nginx-module libfastcommon
FastDFS分布式存储实战.pdf
FastDFS安装,包括tracker和storage安装、Nginx安装,还有FastDFS命令方式测试相关的内容
FastDFS Ngnix安装及配置,图文并茂,描述清晰,自测通过,
FastDFS集群的安装、配置、使用
fastDFS单机版安装教程+安装使用包,fastDFS单机版安装教程+安装使用包