myisamchk 说明及其参数
Description, check and repair of MyISAM tables.
Used without options all tables on the command will be checked for errors
Usage: myisamchk [OPTIONS] tables[.MYI]
Global options:
-H, --HELP Display this help and exit.
-?, --help Display this help and exit.
-t, --tmpdir=path Path for temporary files. Multiple paths can be
specified, separated by colon (:), they will be used
in a round-robin fashion.
-s, --silent Only print errors. One can use two -s to make
myisamchk very silent.
-v, --verbose Print more information. This can be used with
--description and --check. Use many -v for more verbosity.
-V, --version Print version and exit.
-w, --wait Wait if table is locked.
Check options (check is the default action for myisamchk):
-c, --check Check table for errors.
-e, --extend-check Check the table VERY throughly. Only use this in
extreme cases as myisamchk should normally be able to
find out if the table is ok even without this switch.
-F, --fast Check only tables that haven't been closed properly.
-C, --check-only-changed
Check only tables that have changed since last check.
-f, --force Restart with '-r' if there are any errors in the table.
States will be updated as with '--update-state'.
-i, --information Print statistics information about table that is checked.
-m, --medium-check Faster than extend-check, but only finds 99.99% of
all errors. Should be good enough for most cases.
-U --update-state Mark tables as crashed if you find any errors.
-T, --read-only Don't mark table as checked.
Repair options (When using '-r' or '-o'):
-B, --backup Make a backup of the .MYD file as 'filename-time.BAK'.
--correct-checksum Correct checksum information for table.
-D, --data-file-length=# Max length of data file (when recreating data
file when it's full).
-e, --extend-check Try to recover every possible row from the data file
Normally this will also find a lot of garbage rows;
Don't use this option if you are not totally desperate.
-f, --force Overwrite old temporary files.
-k, --keys-used=# Tell MyISAM to update only some specific keys. # is a
bit mask of which keys to use. This can be used to
get faster inserts.
--max-record-length=#
Skip rows bigger than this if myisamchk can't allocate
memory to hold it.
-r, --recover Can fix almost anything except unique keys that aren't
unique.
-n, --sort-recover Forces recovering with sorting even if the temporary
file would be very big.
-p, --parallel-recover
Uses the same technique as '-r' and '-n', but creates
all the keys in parallel, in different threads.
-o, --safe-recover Uses old recovery method; Slower than '-r' but can
handle a couple of cases where '-r' reports that it
can't fix the data file.
--character-sets-dir=...
Directory where character sets are.
--set-collation=name
Change the collation used by the index.
-q, --quick Faster repair by not modifying the data file.
One can give a second '-q' to force myisamchk to
modify the original datafile in case of duplicate keys.
NOTE: Tables where the data file is currupted can't be
fixed with this option.
-u, --unpack Unpack file packed with myisampack.
Other actions:
-a, --analyze Analyze distribution of keys. Will make some joins in
MySQL faster. You can check the calculated distribution
by using '--description --verbose table_name'.
--stats_method=name Specifies how index statistics collection code should
treat NULLs. Possible values of name are "nulls_unequal"
(default for 4.1/5.0), "nulls_equal" (emulate 4.0), and
"nulls_ignored".
-d, --description Prints some information about table.
-A, --set-auto-increment[=value]
Force auto_increment to start at this or higher value
If no value is given, then sets the next auto_increment
value to the highest used value for the auto key + 1.
-S, --sort-index Sort index blocks. This speeds up 'read-next' in
applications.
-R, --sort-records=#
Sort records according to an index. This makes your
data much more localized and may speed up things
(It may be VERY slow to do a sort the first time!).
-b, --block-search=#
Find a record, a block at given offset belongs to.
Default options are read from the following files in the given order:
/etc/my.cnf /etc/mysql/my.cnf /usr/local/mysql/etc/my.cnf ~/.my.cnf
The following groups are read: myisamchk
The following options may be given as the first argument:
--print-defaults Print the program argument list and exit.
--no-defaults Don't read default options from any option file.
--defaults-file=# Only read default options from the given file #.
--defaults-extra-file=# Read this file after the global files are read.
使用 mysql安装自带的工具myisamchk进行检查错误并修复
myisamchk -c -o (或者--safe-recover) 对应表的MYI文件的绝对路径
很容易就搞定
分享到:
相关推荐
解决MySQL error code 145 Table was marked as crashed and should be repaired的方法
些东西都是从其他地方找来的一些解决MYSQL数据库这个错误的方法,并不一定适用于神迹数据库,仅仅供参考一下,具体的解决方法还是需要摸索。
主要介绍了Mysql中Table ‘XXX’ is marked as crashed and last (automatic?)问题解决方法,需要的朋友可以参考下
智慧环保 环保物联网 水质、大气、土壤等领域的数据共享交换。
一:MySQL中MyISAM表损坏原因总结: 1、 服务器突然断电导致数据文件损坏;强制关机,没有先关闭mysql 服务;mysqld 进程在写表时被...3 、Error: Table ‘…’ is marked as crashed and should be repaired 。 4 、打开
基于Socket 的网络调试助手。帮助调试你的Socket环境是否畅通。
网站运行中mysql的数据表难免会出现类似"is marked as crashed and should be repaired"的错误,我们可以用下面这个命令修复
jlink常见问题的汇总,为初拥jlink调试stm32开发板的朋友使用。
用该软件可以快速的建立TCP的服务端和客户端 进行收发
事情是这样的: 我有个BuyVM的VPS,结果人家机器挂了,然后新开了一个给我,我要求给我导出备份,人家还真抢救出来大部分数据.然后就是一个恢复的过程.Web恢复没有任何难度....warning : Table is marked as crashed
问题描述:最近查看mysql数据库服务器日志,老发现有表损坏的错误日志,比如:120724 7:30:48 [ERROR] /data/soft/mysql/libexec/mysqld: Table ‘./blog/wp_links’ is marked as crashed and last (automatic?...
数据库报错: SQLSTATE[HY000]: General error: 144 Table './db_jiangzi_video/cmf_jiangzi_items' is marked as crashed and last (automatic?) repair failed MySQL数据库表修复 MyISAM
- FIX: Widget inspector's Dimensions field should no longer be grayed out if the widget is partially anchored. - FIX: UIRoot's FixedSizeOnMobiles setting should now recognize BB and WP8 as mobile ...
对ITIL的简单介绍,希望给大家带来帮助。
All of a project's header files should be listed as descentants of the project's source directory without use of UNIX directory shortcuts . (the current directory) or .. (the parent directory). For...
x 执行权限;对目录,是进入该目录 - 表示没有权限 形式 - rw- r-- r-- 其中 第一个是文件类型(-表普通文件,d表目录,l表软链接文件) 第2~4个是属主,生成文件时登录的人,权限最高,用u表示 第5~7个是属组...
1. 将resource目录marked as resourceRepositories 2. 创建一个MySQL数据库,创建表的sql语句在同级目录中 3. 修改db.properties中的用户名和密码和使用的数据库 ```properties #数据库配置文件,然后在...