reboot -n
保存数据后重启
1: 查看reboot命令的帮助信息
[root@DB-Server ~]# reboot --help
usage: reboot [-n] [-w] [-d] [-f] [-h] [-i]
-n: don't sync before halting the system
-w: only write a wtmp reboot record and exit.
-d: don't write a wtmp record.
-f: force halt/reboot, don't call shutdown.
-h: put harddisks in standby mode.
-i: shut down all network interfaces.
[root@DB-Server ~]# man reboot
[root@DB-Server ~]# man reboot
HALT(8) Linux System Administrator鈥檚 Manual HALT(8)
NAME
halt, reboot, poweroff - stop the system.
SYNOPSIS
/sbin/halt [-n] [-w] [-d] [-f] [-i] [-p] [-h]
/sbin/reboot [-n] [-w] [-d] [-f] [-i]
/sbin/poweroff [-n] [-w] [-d] [-f] [-i] [-h]
DESCRIPTION
Halt notes that the system is being brought down in the file /var/log/wtmp, and then either tells the kernel to halt, reboot or poweroff the system.
If halt or reboot is called when the system is not in runlevel 0 or 6, in other words when it鈥檚 running normally, shutdown will be invoked instead (with
the -h or -r flag). For more info see the shutdown(8) manpage.
The rest of this manpage describes the behaviour in runlevels 0 and 6, that is when the systems shutdown scripts are being run.
OPTIONS
-n Don鈥檛 sync before reboot or halt. Note that the kernel and storage drivers may still sync.
-w Don鈥檛 actually reboot or halt but only write the wtmp record (in the /var/log/wtmp file).
-d Don鈥檛 write the wtmp record. The -n flag implies -d.
-f Force halt or reboot, don鈥檛 call shutdown(8).
-i Shut down all network interfaces just before halt or reboot.
-h Put all harddrives on the system in standby mode just before halt or poweroff.
-p When halting the system, do a poweroff. This is the default when halt is called as poweroff.
DIAGNOSTICS
If you鈥檙e not the superuser, you will get the message 鈥榤ust be superuser鈥? Users logged in locally on the console can call halt, reboot, and poweroff
without supplying the root password, due to pam_console (8).
NOTES
Under older sysvinit releases , reboot and halt should never be called directly. From release 2.74 on halt and reboot invoke shutdown(8) if the system is
not in runlevel 0 or 6. This means that if halt or reboot cannot find out the current runlevel (for example, when /var/run/utmp hasn鈥檛 been initialized
correctly) shutdown will be called, which might not be what you want. Use the -f flag if you want to do a hard halt or reboot.
The -h flag puts all harddisks in standby mode just before halt or poweroff. Right now this is only implemented for IDE drives. A side effect of putting
the drive in standby mode is that the write cache on the disk is flushed. This is important for IDE drives, since the kernel doesn鈥檛 flush the write-cache
itself before poweroff.
The halt program uses /proc/ide/hd* to find all IDE disk devices, which means that /proc needs to be mounted when halt or poweroff is called or the -h
switch will do nothing.
AUTHOR
Miquel van Smoorenburg, miquels@cistron.nl
SEE ALSO
shutdown(8), init(8), pam_console(8)
Nov 6, 2001 HALT(8)
(END)
2:强制重新开机,不调用shutdown指令的功能
[root@DB-Server ~]# reboot -f
3:关闭网络设置之后再重新启动系统
[root@DB-Server ~]# reboot -i
Broadcast message from root (pts/1) (Mon Jul 28 11:31:28 2014):
The system is going down for reboot NOW!
4:保存数据后再重新启动系统
[root@DB-Server ~]# reboot -n
Broadcast message from root (pts/1) (Mon Jul 28 11:33:57 2014):
The system is going down for reboot NOW!
5:重新启动时不把数据写入记录文件/var/tmp/wtmp
[root@DB-Server ~]# reboot -d
Broadcast message from root (pts/2) (Mon Jul 28 11:23:26 2014):
The system is going down for reboot NOW!
关机命令:
1、halt 立刻关机
2、poweroff 立刻关机
3、shutdown -h now 立刻关机(root用户使用)
4、shutdown -h 10 10分钟后自动关机
如果是通过shutdown命令设置关机的话,可以用shutdown -c命令取消重启
重启命令:
1、reboot
2、shutdown -r now 立刻重启(root用户使用)
3、shutdown -r 10 过10分钟自动重启(root用户使用)
4、shutdown -r 20:35 在时间为20:35时候重启(root用户使用)
如果是通过shutdown命令设置重启的话,可以用shutdown -c命令取消重启
相关推荐
Linux关机和重启服务器命令详解
Linux批量命令执行工具 可批量对多个Linux主机执行命令 重启后依然可以 方便省力 适合统一化管理Linux服务器 可一次性执行多行命令.
在linux下重启oracle数据库及监听器: Linux重启oracle数据库方法1 用root以ssh登录到linux,打开终端输入以下命令: cd $ORACLE_HOME #进入到oracle的安装目录 dbstart #重启服务器 lsnrctl start #重启监听器 cd $...
Linux中一键重启postgresql的脚本命令
本文假设你的apahce安装目录为/usr/local/apache2,这些方法适合任何情况 apahce启动命令: ...要在重启 Apache 服务器时不中断当前的连接,则应运行: /usr/local/sbin/apachectl graceful 如果apac
在linux 下oracle的几种启动方式,整理来自己网络,上传上来也算给自己做个备份,也给有需要人们.doc
Linux系统自动不停重启并计数的shell脚本
Linux命令之ssserver命令详解
详解 Linux中的关机和重启命令 一 shutdown命令 shutdown [选项] 时间 选项: -c:取消前一次关机命令 -h:关机 -r:重启 二 shutdown实战 [root@localhost tmp]# date Sat Jul 15 09:28:35 CST 2017 [root@...
简单实用的linux系统samba服务器配置操作命令,亲测实际成果
Linux关闭和重启系统一般使用相同的命令可以实现。下面脚本之家小编给大家带来了Linux下服务器重启的脚本命令,感兴趣的朋友一起看看吧
在Linux中通过cron配置任务,每周重启WebSphere服务。该文档只是一个例子,还可以用这种方式达到其他定时任务的执行。PDF中有附件。
如何启动/停止/重启MySQL 一、启动方式 1、使用 service 启动:service mysqld start 2、使用 mysqld 脚本启动:/etc/inint.d/mysqld start 3、使用 safe_mysqld 启动:safe_mysqld& 二、停止 1、使用 service 启动...
Linux下定时任务,命令启停jar包服务
重启命令: 1、reboot 2、shutdown -r now 立刻重启(root用户使用) 3、shutdown -r 10 过10分钟...ps:下面给大家分享linux五个重启命令,具体内容如下所示: 一、Linux 的五个重启命令 1、shutdown 2、poweroff
一、Linux 的五个重启命令 1、shutdown 2、poweroff 3、init 4、reboot 5、halt 二、五个重启命令的具体说明 shutdown reboot 在linux下一些常用的关机/重启命令有shutdown、halt、reboot、及init,...
简单操作,个人理解。希望有所帮助。有时候呢,用着用着服务器就炸了,这时候咩,肯定要用Unix命令重启服务器。基本流程就是按在地上摩擦摩擦,洗地,最后再来一份。
Linux服务器巡检指导 "设备 " " "硬件配置信息 " "机型号 " " "CPU " " "内存 " " "硬盘 " " "系统信息 " "操作系统 " " "IP " " "主机名 " " (一)服务器硬件检查 "检查项 "检查操作 "参考标准 "巡检情况 " " " " ...
...
...