Google Play services com.google.android.gms-7.8.93_(2104405-448)

关于Google Play services的各个分支介绍（MX5一定要安装XXXXXX-448分支） 要想使用google play， google map等google应用，就必须安装Google Play Service，但Google Play Service有太多分支了，最近终于搞明白各个分支代表什么。 版本号最后三位(2104405-XYZ)分别表示Android版本，cpu的arm系列，屏幕密度（DPI）。 下面是具体分支介绍： Notes / What's New Uploader's notes: To figure out the right version of Google Play services for your Android device, go to Settings -> Apps -> Google Play services, and look at the last 3 numbers in the parentheses. You'll see something like -XYZ where: 1.第一位X * X defines Android version: 0 for Android <5.0 // 0表示Android5.0以下版本 4 and 7 for Android >=5.0 // 4和7表示Android5.0及以上 8 for Android TV // 8表示Android电视应用 2.第二位Y * Y defines CPU architecture: 1 for armeabi 3 for armeabi-v7a // 32位版本 4 for arm64-v8a // 64位v8版本，MX5必须是这个 7 for x86 // x86主要是对intel cpu来说的 3.第三位Z * Z defines DPI: 0 for universal 2 for 160 4 for 240 6 for 320 8 for 480 // MX5选这个就行了 Notes: It seems that -7YZ builds became -4YZ with Google Play services 6.5. If you were on -7YZ before, you should now install -4YZ. Looks like -8YZ builds are for Android TV. Examples: -014 for Android <5.0 armeabi CPU 240 DPI device -438 for Android 5.0+ armeabi-v7a CPU 480 DPI device -876 for Android TV x86 CPU 320 DPI device 国内用户可以直接从以下镜像网站下载最新到Google Play Service http://www.apkmirror.com/apk/google-inc/google-play-services/ 目前最新版本是Google Play services 7.8.93 MX5用户可以安装以下分支： Google Play services 7.8.93 (2104405-448) http://www.apkmirror.com/apk/google-inc/google-play-services/google-play-services-7-8-93-2104405-448-android-apk-download/ 另外，安装后好需要禁止系统自带【应用中心】自动安装更新，可以设置面流量更新，但不要设置“静默安装更新包”，否则新版本发布后会自动更新成应用中心的最新版本，而最新版本的后三位可能不是你想要的分支，这时候就会导致弹出提示架构不符等。

立即下载

上传者： ameyume 时间： 2015-07-28

android-cts-verifier-6.0_r12-linux_x86-arm.zi

android cts verifier r12

立即下载

上传者： nuanhua209 时间： 2016-12-09

Google Play 服务_com.google.android.gms_202613002_20.26.13 (000304-319035724)

armv7a构架. 安卓4.1-4.4范围 分辨率540×960像素密度240

立即下载

上传者： u012336596 时间： 2020-07-21

com.google.android.gms19.2.75.zip

google套件，谷歌应用市场，谷歌应用服务组件

立即下载

上传者： langyue919 时间： 2019-10-23

feature_exaction_and_matching.rar

基于Opencv440的特征点检测与匹配代码实现

立即下载

上传者： AAAA202012 时间： 2021-05-20

Android_Google_Map.rar_Google api_android_android google map_and

android google map的开发入门 从搭建环境 申请API Key到几个关键类的使用

立即下载

上传者： weixin_42659196 时间： 2022-09-21

play-services-ads-lite-18.3.0.zip

play-services-ads-lite-18.3.0是2019-11-23为止，最新的安卓admob sdk，用于原生安卓介入 加入工程后： import com.google.android.gms.ads.AdListener; import com.google.android.gms.ads.AdRequest; import com.google.android.gms.ads.InterstitialAd; import com.google.android.gms.ads.MobileAds; import com.google.android.gms.ads.initialization.InitializationStatus; import com.google.android.gms.ads.initialization.OnInitializationCompleteListener; 即可

立即下载

上传者： mjlStrike 时间： 2019-11-23

google_m2repository_gms_v11_3_rc05_wear_2_0_5.zip

google_m2repository_gms_v11_3_rc05_wear_2_0_5.zip,谷歌官方下载，sdk组件

立即下载

上传者： airomeo 时间： 2019-03-08

com.google.android.gms_v22.06.57_downyi.com.apk

com.google.android.gms_v22.06.57_downyi.com.apk

立即下载

上传者： qq_54858411 时间： 2023-07-12

com.google.android.gms:play-gms:play-services:15.0.1

解决： Could not find play-services-basement.aar (com.google.android.gms:play-services-basement:15.0.1). Searched in the following locations: https://jcenter.bintray.com/com/google/android/gms/play-services-basement/15.0.1/play-services-basement-15.0.1.aar 最近google 出现不少问题 1、google 欧洲反垄断罚金 2、android 系统 手机策略变革 部分goolge依赖也编译不了 ,,,,,,,,,,,

立即下载

上传者： chengmenghui_oop 时间： 2018-12-02

Google Play services v6.5.96

软件名称：Google Play services 软件版本：v6.5.96官方全机型7版 软件语言：中文 软件大小：33.0M 软件包名：com.google.android.gms 支持系统：Android 2.2+ 【软件介绍】 7版详情：管他那么多，升了再说 10：armeabi平台 30：mdpi,hdpi,xhdpi,xxhdpi 32：mdpi(480*320) 34：hdpi(800*480) 36：xhdpi(1280*720) 38：xxhdpi(1920*1080) 70：x86平台 Google Play 服务可用于更新 Google 应用程序和 Google Play 提供的应用程序。这项元件可让您存取 Google 设定，并协助应用程序加快离线搜寻速度、提供更为身历其境的地图操作环境，同时提升执行效能。 如果您解除安装 Google Play 服务，可能会使部分应用程序无法正常运作，建议您保留这项元件。 更新： -谷歌增强电子商务标签管理器API -广告API的改进，包括HTTPS支持 -定位API的改进，包括电池优化 -驱动API的改进，包括冲突解决 -Android磨损API的改进 -谷歌适合开发者预览 更新： -地图API Lite模式渲染 -新的位置设置对话框 -广告的SDK的改进 -APP索引API的改进 -驱动API的改进，包括新的查询结果的变化事件API

立即下载

上传者： bbcsport 时间： 2015-01-07

com.google.android.gms.19.5.30.beta.zip

google套件，谷歌应用市场，谷歌应用服务组件

立即下载

上传者： langyue919 时间： 2019-10-23

android4.0_GMS.rar

GMS android4.0_GMS.rar

立即下载

上传者： l0711110207 时间： 2011-11-30

com.google.android.gms_v16.0.89-000300-239467275-16089000_Android-4.1.rar

谷歌GMS Core for android4.4,亲测可以使用。方便大家在Android4.4上使用谷歌开发，现在这资源不好找了。

立即下载

上传者： JMGS0013 时间： 2020-04-03

android-cts-verifier-10_r3-linux_x86-arm.zip

android-cts-verifier-10_r3-linux_x86-arm

立即下载

上传者： weixin_41832551 时间： 2020-05-07

ap6212a0_a33_sc3817r_服务器验证通过_bt已经通了_wifi需要修改配置_需要再次验证_20170626_1549.7z

调通sina33下的AP6212A0版本的BT 大文实验室/大文哥 壹捌陆捌零陆捌捌陆捌贰 wb4916 AT qq.com 完成时间：2017/6/26 11:01 版本：V1.0 本文参照： 《A33 wifi移植说明书.pdf》 还有就是全志R16的parrotv1.1的官方SDK（Android4.4.2） 1、打开AP6212的BT，关闭rtl8723bs的BT： [ 3.141273] Bluetooth: HCI UART driver ver 2.2 [ 3.146210] Bluetooth: HCI H4 protocol initialized [ 3.151563] Bluetooth: HCI BCSP protocol initialized [ 3.157154] usbcore: registered new interface driver btusb [ 3.163282] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 [ 3.169599] Bluetooth: BlueSleep Mode Driver Ver 1.1 [ 3.175402] Bluetooth: get rtl8723bs rtl8723bs_bt_host_wake gpio failed [ 3.953017] Bluetooth: RFCOMM TTY layer initialized [ 3.958456] Bluetooth: RFCOMM socket layer initialized [ 3.964183] Bluetooth: RFCOMM ver 1.11 [ 3.968340] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.968638] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 3.968734] [mmc]: mclk 0xf1c20090 0xc100000b [ 3.989421] Bluetooth: BNEP filters: protocol multicast [ 3.995242] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.001921] L2TP core driver, V2.0 [ 4.005706] PPPoL2TP kernel driver, V2.0 [ 4.010070] L2TP IP encapsulation support (L2TPv3) [ 4.015468] L2TP netlink interface [ 4.019264] L2TP ethernet pseudowire support (L2TPv3) [ 4.023860] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B [ 4.023929] [mmc]: mclk 0xf1c20090 0xc100000b [ 4.040272] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 4.048780] ThumbEE CPU extension supported. [ 4.053550] Registering SWP/SWPB emulation handler [ 4.059269] [rfkill]: rfkill set power 1 [ 4.063652] gpio ap6xxx_bt_regon set val 0, act val 0 正常启动的BT加载： [ 3.207764] Bluetooth: HCI UART driver ver 2.2 [ 3.212725] Bluetooth: HCI H4 protocol initialized [ 3.218045] Bluetooth: HCI BCSP protocol initialized [ 3.223671] usbcore: registered new interface driver btusb [ 3.229766] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 [ 3.236243] Bluetooth: MSM Sleep Mode Driver Ver 1.2 rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r$ ll rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ ./build.sh config Welcome to mkscript setup progress All available chips: 0. sun8iw5p1 Choice: 0 All available platforms: 0. android 1. dragonboard 2. linux Choice: 0 All available kernel: 0. linux-3.4 Choice: 0 All available boards: 0. evb 1. maple 2. redwood 3. y2 4. y3 Choice: 4 rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ cd linux-3.4/ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4$ make ARCH=arm menuconfig [*] Networking support ---> <*> Bluetooth subsystem support ---> Bluetooth device drivers ---> < > Broadcom Bluetooth Low Power Manager Support <*> Realtek Bluesleep driver support 修改为： <*> Broadcom Bluetooth Low Power Manager Support < > An inverter between bt hostwake pin and cpu (NEW) < > Realtek Bluesleep driver support 2、（这个不修改：） R:\wyb\ap6212a0_a33_sc3817r\android\device\softwinner\astar-y3\overlay\frameworks\base\core\res\res\values\config.xml "wlan0" "bt-pan" 3、 R:\wyb\ap6212a0_a33_sc3817r\android\device\softwinner\astar-y3\astar_y3.mk # ap6181/6210/6330 sdio wifi fw and nvram #$(call inherit-product-if-exists, hardware/broadcom/wlan/firmware/ap6181/device-bcm.mk) #$(call inherit-product-if-exists, hardware/broadcom/wlan/firmware/ap6210/device-bcm.mk) $(call inherit-product-if-exists, hardware/broadcom/wlan/firmware/ap6212/device-bcm.mk) #$(call inherit-product-if-exists, hardware/broadcom/wlan/firmware/ap6330/device-bcm.mk) #rtl8723bs bt fw and config #$(call inherit-product, hardware/realtek/bluetooth/rtl8723bs/firmware/rtlbtfw_cfg.mk) # camera config for camera detector #PRODUCT_COPY_FILES += \ # device/softwinner/astar-y3/hawkview/sensor_list_cfg.ini:system/etc/hawkview/sensor_list_cfg.ini #add gms features #PRODUCT_COPY_FILES += \ # frameworks/native/data/etc/android.hardware.faketouch.xml:system/etc/permissions/android.hardware.faketouch.xml \ # frameworks/native/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:system/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \ # frameworks/native/data/etc/android.hardware.usb.host.xml:system/etc/permissions/android.hardware.usb.host.xml # 3G Data Card Packages #PRODUCT_PACKAGES += \ # u3gmonitor \ # chat \ # rild \ # pppd # 3G Data Card Configuration Flie #PRODUCT_COPY_FILES += \ # device/softwinner/polaris-common/rild/ip-down:system/etc/ppp/ip-down \ # device/softwinner/polaris-common/rild/ip-up:system/etc/ppp/ip-up \ # device/softwinner/polaris-common/rild/3g_dongle.cfg:system/etc/3g_dongle.cfg \ # device/softwinner/polaris-common/rild/usb_modeswitch:system/bin/usb_modeswitch \ # device/softwinner/polaris-common/rild/call-pppd:system/xbin/call-pppd \ # device/softwinner/polaris-common/rild/usb_modeswitch.sh:system/xbin/usb_modeswitch.sh \ # device/softwinner/polaris-common/rild/apns-conf_sdk.xml:system/etc/apns-conf.xml \ # device/softwinner/polaris-common/rild/libsoftwinner-ril.so:system/lib/libsoftwinner-ril.so #PRODUCT_COPY_FILES += \ # device/softwinner/polaris-common/rild/init.3gdongle.rc:root/init.sunxi.3gdongle.rc # 3G Data Card usb modeswitch File #PRODUCT_COPY_FILES += \ # $(call find-copy-subdir-files,*,device/softwinner/polaris-common/rild/usb_modeswitch.d,system/etc/usb_modeswitch.d) PRODUCT_PROPERTY_OVERRIDES += \ ro.sw.embeded.telephony = false PRODUCT_PROPERTY_OVERRIDES += \ persist.sys.timezone=Asia/Shanghai \ persist.sys.language=zh \ persist.sys.country=CN PRODUCT_PACKAGES += Bluetooth #PRODUCT_PROPERTY_OVERRIDES += \ # ro.product.8723b_bt.used=true #GPS Feature #PRODUCT_PACKAGES += gps.polaris #BOARD_USES_GPS_TYPE := simulator #PRODUCT_COPY_FILES += frameworks/native/data/etc/android.hardware.location.xml:system/etc/permissions/android.hardware.location.xml # evb logger PRODUCT_COPY_FILES += \ device/softwinner/astar-y3/tools/logger.sh:system/bin/logger.sh PRODUCT_PROPERTY_OVERRIDES += \ persist.sys.usb.config=mass_storage,adb \ ro.adb.secure=0 ro.udisk.lable=Polaris \ ro.font.scale=1.0 \ ro.hwa.force=false \ rw.logger=0 \ ro.sys.bootfast=true \ debug.hwc.showfps=0 \ debug.hwui.render_dirty_regions=false #ro.sys.storage_type = emulated \ #for gms #PRODUCT_PROPERTY_OVERRIDES += \ # ro.sys.mutedrm=true \ # ro.adb.secure=1 PRODUCT_PROPERTY_OVERRIDES += \ ro.sf.lcd_density=213 \ ro.product.firmware=v2.0 $(call inherit-product-if-exists, device/softwinner/astar-y3/modules/modules.mk) DEVICE_PACKAGE_OVERLAYS := device/softwinner/astar-y3/overlay PRODUCT_CHARACTERISTICS := tablet # Overrides PRODUCT_AAPT_CONFIG := xlarge hdpi xhdpi large PRODUCT_AAPT_PREF_CONFIG := xhdpi PRODUCT_BRAND := Allwinner PRODUCT_NAME := astar_y3 PRODUCT_DEVICE := astar-y3 PRODUCT_MODEL := QUAD-CORE A33 y3 PRODUCT_MANUFACTURER := softwinner #include device/softwinner/polaris-common/prebuild/google/products/gms_base.mk 4、 R:\wyb\ap6212a0_a33_sc3817r\android\device\softwinner\astar-y3\BoardConfig.mk # wifi and bt configuration # 1. Wifi Configuration # 1.1 realtek wifi support # 1.1 realtek wifi configuration #BOARD_WIFI_VENDOR := realtek ifeq ($(BOARD_WIFI_VENDOR), realtek) WPA_SUPPLICANT_VERSION := VER_0_8_X BOARD_WPA_SUPPLICANT_DRIVER := NL80211 BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_rtl BOARD_HOSTAPD_DRIVER := NL80211 BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_rtl SW_BOARD_USR_WIFI := rtl8188eu BOARD_WLAN_DEVICE := rtl8188eu #SW_BOARD_USR_WIFI := rtl8723au #BOARD_WLAN_DEVICE := rtl8723au #SW_BOARD_USR_WIFI := rtl8723bs #BOARD_WLAN_DEVICE := rtl8723bs endif # 1.2 broadcom wifi support BOARD_WIFI_VENDOR := broadcom ifeq ($(BOARD_WIFI_VENDOR), broadcom) BOARD_WPA_SUPPLICANT_DRIVER := NL80211 WPA_SUPPLICANT_VERSION := VER_0_8_X BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_bcmdhd BOARD_HOSTAPD_DRIVER := NL80211 BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_bcmdhd BOARD_WLAN_DEVICE := bcmdhd WIFI_DRIVER_FW_PATH_PARAM := "/sys/module/bcmdhd/parameters/firmware_path" #SW_BOARD_USR_WIFI := AP6181 #SW_BOARD_USR_WIFI := AP6210 #WIFI_DRIVER_FW_PATH_STA := "/system/vendor/modules/fw_bcm40181a2.bin" #WIFI_DRIVER_FW_PATH_P2P := "/system/vendor/modules/fw_bcm40181a2_p2p.bin" #WIFI_DRIVER_FW_PATH_AP := "/system/vendor/modules/fw_bcm40181a2_apsta.bin" # 2017/6/21 15:11 wenyuanbo configure ap6212 use ap6210 SW_BOARD_USR_WIFI := AP6212 WIFI_DRIVER_FW_PATH_STA := "/system/vendor/modules/fw_bcm43438a0.bin" WIFI_DRIVER_FW_PATH_P2P := "/system/vendor/modules/fw_bcm43438a0_p2p.bin" WIFI_DRIVER_FW_PATH_AP := "/system/vendor/modules/fw_bcm43438a0_apsta.bin" #SW_BOARD_USR_WIFI := AP6330 #WIFI_DRIVER_FW_PATH_STA := "/system/vendor/modules/fw_bcm40183b2_ag.bin" #WIFI_DRIVER_FW_PATH_P2P := "/system/vendor/modules/fw_bcm40183b2_ag_p2p.bin" #WIFI_DRIVER_FW_PATH_AP := "/system/vendor/modules/fw_bcm40183b2_ag_apsta.bin" endif #1.3 eag wifi config #BOARD_WIFI_VENDOR := eagle ifeq ($(BOARD_WIFI_VENDOR), eagle) WPA_SUPPLICANT_VERSION := VER_0_8_X BOARD_WPA_SUPPLICANT_DRIVER := NL80211 BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_eagle BOARD_HOSTAPD_DRIVER := NL80211 BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_eagle SW_BOARD_USR_WIFI := esp8089 BOARD_WLAN_DEVICE := esp8089 endif # 2. Bluetooth Configuration # make sure BOARD_HAVE_BLUETOOTH is true for every bt vendor BOARD_HAVE_BLUETOOTH := true BOARD_HAVE_BLUETOOTH_BCM := true #SW_BOARD_HAVE_BLUETOOTH_NAME := ap6210 SW_BOARD_HAVE_BLUETOOTH_NAME := ap6212 #SW_BOARD_HAVE_BLUETOOTH_NAME := ap6330 #BOARD_HAVE_BLUETOOTH_RTK := true #BLUETOOTH_HCI_USE_RTK_H5 := true #SW_BOARD_HAVE_BLUETOOTH_NAME := rtl8723bs 5、 R:\wyb\ap6212a0_a33_sc3817r\android\device\softwinner\astar-y3\init.sun8i.rc on early-fs mount_all /fstab.sun8i setprop ro.crypto.fuse_sdcard true insmod /system/vendor/modules/disp.ko insmod /system/vendor/modules/lcd.ko insmod /system/vendor/modules/mali.ko insmod /system/vendor/modules/leds-sunxi.ko insmod /system/vendor/modules/bcmdhd.ko insmod /system/vendor/modules/bcm_btlpm.ko #2G or 3G init.rc # import init.sunxi.3gdongle.rc ## 1. realtek & eagle wifi service ## 1.1 realtek & eagle wifi sta service #service wpa_supplicant /system/bin/wpa_supplicant \ # -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ # -O/data/misc/wifi/sockets \ # -e/data/misc/wifi/entropy.bin -g@android:wpa_wlan0 # # we will start as root and wpa_supplicant will switch to user wifi # # after setting up the capabilities required for WEXT # # user wifi # # group wifi inet keystore # class main # socket wpa_wlan0 dgram 660 wifi wifi # disabled # oneshot # ## 1.2 realtek & eagle wifi sta p2p concurrent service #service p2p_supplicant /system/bin/wpa_supplicant \ # -ip2p0 -Dnl80211 -c/data/misc/wifi/p2p_supplicant.conf \ # -e/data/misc/wifi/entropy.bin -N \ # -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ # -O/data/misc/wifi/sockets \ # -g@android:wpa_wlan0 # class main # socket wpa_wlan0 dgram 660 wifi wifi # disabled # oneshot # 2. broadcom wifi service # 2.1 broadcom wifi station and softap service wpa_supplicant /system/bin/wpa_supplicant \ -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ -I/system/etc/wifi/wpa_supplicant_overlay.conf \ -O/data/misc/wifi/sockets \ -e/data/misc/wifi/entropy.bin -g@android:wpa_wlan0 # we will start as root and wpa_supplicant will switch to user wifi # after setting up the capabilities required for WEXT # user wifi # group wifi inet keystore class main socket wpa_wlan0 dgram 660 wifi wifi disabled oneshot # 2.2 broadcom wifi sta p2p concurrent service service p2p_supplicant /system/bin/wpa_supplicant \ -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \ -I/system/etc/wifi/wpa_supplicant_overlay.conf \ -O/data/misc/wifi/sockets -N \ -ip2p0 -Dnl80211 -c/data/misc/wifi/p2p_supplicant.conf \ -I/system/etc/wifi/p2p_supplicant_overlay.conf \ -puse_p2p_group_interface=1 -e/data/misc/wifi/entropy.bin \ -g@android:wpa_wlan0 # we will start as root and wpa_supplicant will switch to user wifi # after setting up the capabilities required for WEXT # user wifi # group wifi inet keystore class main socket wpa_wlan0 dgram 660 wifi wifi disabled oneshot 6、（不需要修改） R:\wyb\ap6212a0_a33_sc3817r\android\device\softwinner\astar-y3\ueventd.sun8i.rc 7、 R:\wyb\ap6212a0_a33_sc3817r\android\frameworks\base\packages\SettingsProvider\res\values\defaults.xml 1800000 true 8、 R:\wyb\ap6212a0_a33_sc3817r\android\frameworks\base\services\java\com\android\server\BatteryService.java // private static final boolean DEBUG = false; private static final boolean DEBUG = true; private void sendIntentLocked() { // Pack up the values and broadcast them to everyone final Intent intent = new Intent(Intent.ACTION_BATTERY_CHANGED); intent.addFlags(Intent.FLAG_RECEIVER_REGISTERED_ONLY | Intent.FLAG_RECEIVER_REPLACE_PENDING); int icon = getIconLocked(mBatteryProps.batteryLevel); intent.putExtra(BatteryManager.EXTRA_STATUS, mBatteryProps.batteryStatus); intent.putExtra(BatteryManager.EXTRA_HEALTH, mBatteryProps.batteryHealth); intent.putExtra(BatteryManager.EXTRA_PRESENT, mBatteryProps.batteryPresent); //intent.putExtra(BatteryManager.EXTRA_LEVEL, mBatteryProps.batteryLevel); intent.putExtra(BatteryManager.EXTRA_LEVEL, 100); intent.putExtra(BatteryManager.EXTRA_SCALE, BATTERY_SCALE); intent.putExtra(BatteryManager.EXTRA_ICON_SMALL, icon); intent.putExtra(BatteryManager.EXTRA_PLUGGED, mPlugType); //intent.putExtra(BatteryManager.EXTRA_VOLTAGE, mBatteryProps.batteryVoltage); intent.putExtra(BatteryManager.EXTRA_VOLTAGE, 4200); intent.putExtra(BatteryManager.EXTRA_TEMPERATURE, mBatteryProps.batteryTemperature); intent.putExtra(BatteryManager.EXTRA_TECHNOLOGY, mBatteryProps.batteryTechnology); intent.putExtra(BatteryManager.EXTRA_INVALID_CHARGER, mInvalidCharger); if (DEBUG) { Slog.d(TAG, "2016/12/05 10:41 wenyuanbo **** Sending ACTION_BATTERY_CHANGED. level:" + mBatteryProps.batteryLevel + ", scale:" + BATTERY_SCALE + ", status:" + mBatteryProps.batteryStatus + ", health:" + mBatteryProps.batteryHealth + ", present:" + mBatteryProps.batteryPresent + ", voltage: " + mBatteryProps.batteryVoltage + ", temperature: " + mBatteryProps.batteryTemperature + ", technology: " + mBatteryProps.batteryTechnology + ", AC powered:" + mBatteryProps.chargerAcOnline + ", USB powered:" + mBatteryProps.chargerUsbOnline + ", Wireless powered:" + mBatteryProps.chargerWirelessOnline + ", icon:" + icon + ", invalid charger:" + mInvalidCharger); } mHandler.post(new Runnable() { @Override public void run() { ActivityManagerNative.broadcastStickyIntent(intent, null, UserHandle.USER_ALL); } }); } 9、（直接拷贝同目录下的ap6210：） R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\conf\softwinner\ap6212\Android.mk LOCAL_PATH := $(call my-dir) include $(CLEAR_VARS) LOCAL_MODULE := bt_vendor.conf LOCAL_MODULE_CLASS := ETC LOCAL_MODULE_PATH := $(TARGET_OUT)/etc/bluetooth LOCAL_MODULE_TAGS := eng LOCAL_SRC_FILES := $(LOCAL_MODULE) include $(BUILD_PREBUILT) R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\conf\softwinner\ap6212\bt_vendor.conf # UART device port where Bluetooth controller is attached UartPort = /dev/ttyS1 # Firmware patch file location FwPatchFilePath = /system/vendor/modules/ # Firmware Name FwPatchFileName = bcm43438a0.hcd 10、新增：vnd_astar-y3-ap6212.txt，直接拷贝：vnd_astar-y2-ap6210.txt R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\include\vnd_astar-y3-ap6212.txt R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\include\vnd_astar-y2-ap6210.txt BLUETOOTH_UART_DEVICE_PORT = "/dev/ttyS1" FW_PATCHFILE_LOCATION = "/system/vendor/modules/" LPM_IDLE_TIMEOUT_MULTIPLE = 5 UART_TARGET_BAUD_RATE = 1500000 BT_WAKE_VIA_PROC = TRUE #LPM_SLEEP_MODE = FALSE BTVND_DBG = TRUE BTHW_DBG = TRUE VNDUSERIAL_DBG = TRUE UPIO_DBG = TRUE 11、 R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\src\userial_vendor.c //#ifdef USE_AP6210_BT_MODULE #if defined(USE_AP6210_BT_MODULE) || defined(USE_AP6212_BT_MODULE) /* PATCH for AP6210. Will detect CTS(module side) to select transport mode*/ ALOGE("userial vendor open: USE AP6210 BT MODULE."); usleep(100000); close(vnd_userial.fd); if ((vnd_userial.fd = open(vnd_userial.port_name, O_RDWR)) == -1) { ALOGE("userial vendor open: unable to open %s", vnd_userial.port_name); return -1; } #endif //USE_AP6210_BT_MODULE 12、 R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\Android.mk ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6210) LOCAL_CFLAGS += -DUSE_AP6210_BT_MODULE endif ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6212) LOCAL_CFLAGS += -DUSE_AP6212_BT_MODULE endif ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6330) include $(LOCAL_PATH)/conf/softwinner/ap6330/Android.mk endif ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6210) include $(LOCAL_PATH)/conf/softwinner/ap6210/Android.mk endif ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6212) include $(LOCAL_PATH)/conf/softwinner/ap6212/Android.mk endif 13、 R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\libbt\vnd_buildcfg.mk ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6210) SRC := $(call my-dir)/include/$(addprefix vnd_, $(addsuffix -ap6210.txt,$(basename $(TARGET_DEVICE)))) endif ifeq ($(SW_BOARD_HAVE_BLUETOOTH_NAME), ap6212) SRC := $(call my-dir)/include/$(addprefix vnd_, $(addsuffix -ap6212.txt,$(basename $(TARGET_DEVICE)))) endif 14、（这些AP6212的WIFI的bin文件和BT的hcd文件来自全志R16的SDK，当然也可以找正基原厂/代理商索取：） R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\wlan\firmware\ap6212\bcm43438a0.hcd （根据ap6210修改：） R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\wlan\firmware\ap6212\device-bcm.mk # # Copyright (C) 2008 The Android Open Source Project # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # ######################## -include hardware/broadcom/wlan/bcmdhd/config/config-bcm.mk PRODUCT_COPY_FILES += \ hardware/broadcom/wlan/firmware/ap6212/fw_bcm43438a0.bin:system/vendor/modules/fw_bcm43438a0.bin \ hardware/broadcom/wlan/firmware/ap6212/fw_bcm43438a0_apsta.bin:system/vendor/modules/fw_bcm43438a0_apsta.bin \ hardware/broadcom/wlan/firmware/ap6212/fw_bcm43438a0_p2p.bin:system/vendor/modules/fw_bcm43438a0_p2p.bin \ hardware/broadcom/wlan/firmware/ap6212/nvram_ap6212.txt:system/vendor/modules/nvram_ap6212.txt \ hardware/broadcom/wlan/firmware/ap6212/bcm43438a0.hcd:system/vendor/modules/bcm43438a0.hcd #hardware/broadcom/wlan/firmware/ap6212/config.txt:system/vendor/modules/config.txt ######################## R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\wlan\firmware\ap6212\fw_bcm43438a0.bin R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\wlan\firmware\ap6212\fw_bcm43438a0_apsta.bin R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\wlan\firmware\ap6212\fw_bcm43438a0_p2p.bin R:\wyb\ap6212a0_a33_sc3817r\android\hardware\broadcom\wlan\firmware\ap6212\nvram_ap6212.txt 15、（可选修改：） R:\wyb\ap6212a0_a33_sc3817r\android\packages\apps\Camera2\src\com\android\camera\CameraActivity.java private BroadcastReceiver mBatteryInfoReceiver = new BroadcastReceiver() { @Override public void onReceive(Context context, Intent intent) { String action = intent.getAction(); if (Intent.ACTION_BATTERY_CHANGED.equals(action)) { int Level = intent.getIntExtra("level", 0); int Scale = intent.getIntExtra("scale", 100); Log.w(TAG, "2016/11/29 19:54 &&&& wenyuanbo battery Level" + Level); /* *Logic: *1.the battery level is lower then 5%. *2.if in camera, make sure that not in the snapshot progress. *3.if in videocamera, make sure that not in the videorecording progress. *4.everytime starting the camera activity, the battery level is broadcasted, * if meeting the conditions above, give a dialog, press it and finish the activity. *5.if the conditions are not satisfied when started, play for a moment, in the camera acitvity * or video camera activity, the conditiosn are satisfied, also give a dialog for finishing the activity. * *by fuqiang. */ if(Level < 5) { Runnable runnable_close_camera = new Runnable() { @Override public void run() { //close the camera. // CameraActivity.this.finish(); } }; Log.w(TAG, "2016/11/29 18:20 **** wenyuanbo battery Level" + Level); showLocationDialog(); } /* *Logic: *1.the battery level is lhigher then 5% and lower than 15%. *2.if in camera, make sure that not in the snapshot progress. *3.if in videocamera, make sure that not in the videorecording progress. *4.whether in camera or in videocamera, make sure that the flash mode is supported. *5.everytime starting the camera activity, the battery level is broadcasted, * if meeting the conditions above, forbidden the flash(gray icon), give a dialog to notise user. *6.if the conditions are not satisfied when started, play for a moment, in the camera acitvity * or video camera activity, the conditiosn are satisfied, forbidden the flash and give a notice dialog. *7.the dialog is only given once for each camera activity starting. * *by fuqiang. */ else if(Level < 16) { //close the flash mode. /* if (mIsLowBatteryDialogShown == false) { mRotateDialog.showAlertDialog( getString(R.string.warning), getString(R.string.low_battery_15), null, null, getString(R.string.close), null); mIsLowBatteryDialogShown = true; } */ } } } }; 16、（可选：） R:\wyb\ap6212a0_a33_sc3817r\lichee\tools\pack\chips\sun8iw5p1\configs\default\env.cfg bootdelay=3 loglevel=8 17、 R:\wyb\ap6212a0_a33_sc3817r\lichee\tools\pack\chips\sun8iw5p1\configs\y3\sys_config.fex [power_sply] dcdc1_vol = 3000 dcdc2_vol = 1100 dcdc3_vol = 1200 dcdc4_vol = 0 dcdc5_vol = 1500 aldo1_vol = 3300 aldo2_vol = 2500 aldo3_vol = 3000 dldo1_vol = 3300 dldo2_vol = 3300 dldo3_vol = 2800 ;gpio0_vol = 2800 ldoio0_vol = 2800 ;---------------------------------------------------------------------------------- ;uart configuration ;uart_used = uart x enable ;uart_type = 2:2 wire,4:4 wire,8:8 wire, full function ;---------------------------------------------------------------------------------- [uart0] uart_used = 1 uart_port = 0 uart_type = 2 uart_tx = port:PF02<3><1> uart_rx = port:PF04<3><1> [uart1] uart_used = 1 uart_port = 1 uart_type = 4 uart_tx = port:PG06<2><1> uart_rx = port:PG07<2><1> uart_rts = port:PG08<2><1> uart_cts = port:PG09<2><1> [uart2] uart_used = 1 uart_type = 4 uart_tx = port:PB00<2><1> uart_rx = port:PB01<2><1> uart_rts = port:PB02<2><1> uart_cts = port:PB03<2><1> [uart3] uart_used = 0 uart_type = 4 uart_tx = port:PH06<3><1> uart_rx = port:PH07<3><1> uart_rts = port:PH08<3><1> uart_cts = port:PH09<3><1> [uart4] uart_used = 0 uart_port = 4 uart_type = 2 uart_tx = port:PA04<2><1> uart_rx = port:PA05<2><1> uart_rts = port:PA06<2><1> uart_cts = port:PA07<2><1> ;---------------------------------------------------------------------------------- ;capacitor tp configuration ;ctp_twi_id : twi controller ID ;ctp_twi_addr : I2C slave address, 7bit ;ctp_screen_max_x/_y : resolution of touch panel ;ctp_revert_x/_y_flag : whether need to revert x/y ;ctp_exchange_x_y_flag: whether need to exchange the value of x and y ;ctp_int_port : port for tp's interrupt signal ;ctp_wakeup : port for wakeup tp ;---------------------------------------------------------------------------------- [ctp_para] ctp_used = 1 ctp_name = "gt82x" ctp_twi_id = 0 ctp_twi_addr = 0x5d ctp_screen_max_x = 1280 ctp_screen_max_y = 800 ctp_revert_x_flag = 1 ctp_revert_y_flag = 1 ctp_exchange_x_y_flag = 1 ctp_int_port = port:PL04<4> ctp_wakeup = port:PL03<1><1> ctp_power_ldo = ctp_power_ldo_vol = ctp_power_io = ;-------------------------------------------------------------------------------- ; CTP automatic detection configuration ;ctp_detect_used --- Whether startup automatic inspection function. 1:used,0:unused ;Module name postposition 1 said detection, 0 means no detection. ;-------------------------------------------------------------------------------- [ctp_list_para] ctp_det_used = 1 ft5x_ts = 1 gt82x = 1 gslX680 = 1 gslX680new = 0 gt9xx_ts = 1 gt9xxf_ts = 0 tu_ts = 0 gt818_ts = 1 zet622x = 1 aw5306_ts = 1 icn83xx_ts = 0 [lcd0_para] lcd_used = 1 lcd_driver_name = "default_lcd" lcd_if = 3 lcd_x = 1280 lcd_y = 800 lcd_width = 150 lcd_height = 94 lcd_dclk_freq = 71 lcd_pwm_used = 1 lcd_pwm_ch = 0 lcd_pwm_freq = 50000 lcd_pwm_pol = 1 lcd_hbp = 20 lcd_ht = 1418 lcd_hspw = 10 lcd_vbp = 10 lcd_vt = 830 lcd_vspw = 5 lcd_lvds_if = 0 lcd_lvds_colordepth = 1 lcd_lvds_mode = 0 lcd_frm = 1 lcd_gamma_en = 0 lcd_bright_curve_en = 0 lcd_cmap_en = 0 deu_mode = 0 lcdgamma4iep = 22 smart_color = 90 lcd_bl_en = port:PD13<1><0><1> ;ap6xxx_wl_regon = port:PL06<1><0> ;lcd_bl_en = port:PL06<1><0><1> lcd_power = "axp22_dc1sw" lcdd0 = port:PD18<3><0> lcdd1 = port:PD19<3><0> lcdd2 = port:PD20<3><0> lcdd3 = port:PD21<3><0> lcdd4 = port:PD22<3><0> lcdd5 = port:PD23<3><0> lcdd6 = port:PD24<3><0> lcdd7 = port:PD25<3><0> lcdd8 = port:PD26<3><0> lcdd9 = port:PD27<3><0> ;---------------------------------------------------------------------------------- ;pwm config ;---------------------------------------------------------------------------------- [pwm0_para] pwm_used = 0 pwm_positive = port:PH00<2><0> [pwm1_para] pwm_used = 1 pwm_positive = port:PH01<2><0> ;-------------------------------------------------------------------------------- ;wifi configuration ;wifi_sdc_id: 0- SDC0, 1- SDC1, 2- SDC2, 3- SDC3 ;wifi_usbc_id: 0- USB0, 1- USB1, 2- USB2 ;wifi_usbc_type: 1- EHCI(speed 2.0), 2- OHCI(speed 1.0) ;wifi_mod_sel: 0- none, 1- ap6181, 2- ap6210(wifi+bt), ; 3 - rtl8188eu, 4- rtl8723au(wifi+bt), ; 5 - rtl8723bs, 6- esp8089 ;-------------------------------------------------------------------------------- [wifi_para] wifi_used = 1 wifi_sdc_id = 1 wifi_usbc_id = 1 wifi_usbc_type = 1 wifi_mod_sel = 2 wifi_power = "axp22_dldo1" wifi_power_ext1 = "axp22_dldo2" wifi_power_ext2 = "axp22_aldo1" wifi_power_switch = ;wifi_power_switch = port:power0<1><0><0> ; 1 - ap6181 sdio wifi gpio config ;ap6xxx_wl_regon = port:PL06<1><0> ;ap6xxx_wl_host_wake = port:PL07<4><0> ;ap6xxx_lpo_use_apclk = 1 ; 2 - ap6210 sdio wifi gpio config ap6xxx_wl_regon = port:PL06<1><0> ;ap6xxx_wl_regon = port:PD13<1><0> ap6xxx_wl_host_wake = port:PL07<4><0> ap6xxx_bt_regon = port:PL08<1><0> ap6xxx_bt_wake = port:PL10<1><0> ap6xxx_bt_host_wake = port:PL09<4><0> ap6xxx_lpo_use_apclk = 1 ; 3 - rtl8188eu usb wifi gpio conifg ; 4 - rtl8723au usb wifi + bt ; 5 - rtl8723bs sdio wifi + bt ;rtl8723bs_chip_en = port:PL11<1><0> ;rtl8723bs_wl_regon = port:PL06<1><0> ;rtl8723bs_wl_host_wake = port:PL07<4><0> ;rtl8723bs_bt_regon = port:PL08<1><0> ;rtl8723bs_bt_wake = port:PL10<1><0> ;rtl8723bs_bt_host_wake = port:PL09<4><0> ;rtl8723bs_lpo_use_apclk = 0 ; 6 - eagle sdio wifi ;esp_wl_chip_en = port:PL03<1><0> ;esp_wl_rst = port:PL02<1><0> ;-------------------------------------------------------------------------------- ;blue tooth ;bt_used ---- blue tooth used (0- no used, 1- used) ;bt_uard_id ---- uart index ;-------------------------------------------------------------------------------- [bt_para] bt_used = 1 bt_uart_id = 1 power_start = 3 pmu_temp_enable = 0 18、 刷机之后，BT可以用。 传输4.5MB的JPG图片大概需要2分钟。 WIFI： 在设置→WLAN（打开之后）： shell@astar-y3:/ $ shell@astar-y3:/ $ [ 469.609956] init: computing context for service '/system/bin/wpa_supplicant' [ 469.618386] init: starting 'p2p_supplicant' [ 469.625739] init: Created socket '/dev/socket/wpa_wlan0' with mode '660', user '1010', group '1010' [ 469.673379] init: waitpid returned pid 2065, status = 0000ff00 [ 469.679923] init: process 'p2p_supplicant', pid 2065 exited [ 476.197334] sndpcm_unmute,line:1099 [ 451.464755] CPU1: Booted secondary processor [ 478.459403] CPU1: shutdown [ 478.462947] [hotplug]: cpu(0) try to kill cpu(1) [ 478.468478] [hotplug]: cpu1 is killed! . shell@astar-y3:/ $ 分析启动的log： [ 17.526849] gpio ap6xxx_wl_regon set val 1, act val 1 [ 17.632508] [ap6xxx]: sdio wifi power state: on [ 17.637576] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 17.637751] =========== WLAN placed in POWER ON ======== [ 17.654651] [mmc]: sdc1 card_power_on start... [ 17.659576] [mmc]: sdc1 power_supply is null [ 17.664322] [mmc]: sdc1 card_power_on ok [ 17.680039] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 17.690275] [mmc]: mclk 0xf1c2008c 0x8002000e [ 17.772361] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 52, RTO !! [ 17.781309] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 52, RTO !! [ 17.789448] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 17.799714] [mmc]: mclk 0xf1c2008c 0x8002000e [ 17.862032] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 17.872262] [mmc]: mclk 0xf1c2008c 0x8002000e [ 17.933953] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 8, RTO !! [ 17.941997] *******************Try sdio******************* [ 17.948400] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 17.958630] [mmc]: mclk 0xf1c2008c 0x8002000e [ 18.027775] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 18.035416] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 18.043087] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 18.051920] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 18.145287] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B [ 18.155436] [mmc]: mclk 0xf1c2008c 0x8002000e [ 18.215346] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B [ 18.225736] [mmc]: mclk 0xf1c2008c 0x8100000b [ 18.285675] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 18.296021] [mmc]: mclk 0xf1c2008c 0x8140030b [ 18.357915] mmc1: new high speed SDIO card at address 0001 [ 18.364532] bcmsdh_register: Linux Kernel SDIO/MMC Driver [ 18.364575] *******************sdio init ok******************* [ 18.377207] bcm_wlan_get_oob_irq enter. [ 18.381537] gpio [359] map to virq [7] ok [ 18.388851] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4 [ 18.396019] dhdsdio_probe_attach: unsupported chip: 0xa9a6 [ 18.402155] dhdsdio_probe: dhdsdio_probe_attach failed [ 18.407899] bcmsdh_probe: device attach failed [ 18.412981] [ 18.412984] Dongle Host Driver, version 1.88.45.3 (r420671) [ 18.412989] Compiled in drivers/net/wireless/bcmdhd on Jun 26 2017 at 12:06:39 [ 18.428835] dhd_module_init: sdio_register_driver timeout or error [ 18.435928] gpio ap6xxx_wl_regon set val 0, act val 0 [ 18.541549] [ap6xxx]: sdio wifi power state: off [ 18.546679] =========== WLAN placed in POWER OFF ======== [ 18.546915] mmc1: card 0001 removed [ 18.546995] [mmc]: mmc not poweroff notifiy [ 18.547007] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 18.547160] [mmc]: sdc1 card_power_off start... [ 18.547166] [mmc]: sdc1 power_supply is null [ 18.547173] [mmc]: sdc1 card_power_off ok [ 18.631655] init: command 'insmod' r=-1 [ 18.636066] init: command 'insmod' r=-1 [ 18.658010] fs_mgr: swapon failed for /dev/block/zram0 [ 18.663804] init: command 'swapon_all' r=-1 [ 18.668504] init: processing action 0x58e70 (console_init) [ 18.675396] init: width = 1280 [ 18.678788] init: height = 800 [ 18.682224] init: s.st_size = 3145728 [ 18.686308] init: logo match failed!fbsize = 4096000 [ 18.718811] init: command 'console_init' r=0 [ 18.723628] init: processing action 0x55bf0 (fs) [ 18.730640] init: command 'mkdir' r=-2 [ 18.741901] init: command 'insmod' r=0 [ 18.752227] init: command 'insmod' r=0 [ 18.756491] init: command 'insmod' r=-1 [ 18.771211] init: command 'insmod' r=0 [ 18.779731] init: command 'insmod' r=0 [ 18.791739] init: command 'insmod' r=0 [ 18.803941] init: command 'insmod' r=0 [ 18.816178] init: command 'insmod' r=0 19、查找：（dhdsdio_probe_attach: unsupported chip: 0xa9a6） rootroot@rootroot-E400:~$ cd wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd/ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ grep "unsupported chip" . -R ./dhd_sdio.c: DHD_ERROR(("%s: unsupported chip: 0xx\n", ./sbutils.c: SI_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n", 匹配到二进制文件 ./dhd_sdio.o 匹配到二进制文件 ./bcmdhd.o 匹配到二进制文件 ./bcmdhd.ko 匹配到二进制文件 ./sbutils.o rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ 经过确认： R:\wyb\ap6212a0_a33_sc3817r\lichee\linux-3.4\drivers\net\wireless\bcmdhd\dhd_sdio.c static bool dhdsdio_probe_attach(struct dhd_bus *bus, osl_t *osh, void *sdh, void *regsva, uint16 devid) { …… bcmsdh_chipinfo(sdh, bus->sih->chip, bus->sih->chiprev); if (!dhdsdio_chipmatch((uint16)bus->sih->chip)) { DHD_ERROR(("%s: unsupported chip: 0xx\n", __FUNCTION__, bus->sih->chip)); goto fail; } …… } 继续追踪： static bool dhdsdio_chipmatch(uint16 chipid) { if (chipid == BCM4325_CHIP_ID) return TRUE; if (chipid == BCM4329_CHIP_ID) return TRUE; if (chipid == BCM4315_CHIP_ID) return TRUE; if (chipid == BCM4319_CHIP_ID) return TRUE; if (chipid == BCM4336_CHIP_ID) return TRUE; if (chipid == BCM4330_CHIP_ID) return TRUE; if (chipid == BCM43237_CHIP_ID) return TRUE; if (chipid == BCM43362_CHIP_ID) return TRUE; if (chipid == BCM4314_CHIP_ID) return TRUE; if (chipid == BCM43242_CHIP_ID) return TRUE; if (chipid == BCM43340_CHIP_ID) return TRUE; if (chipid == BCM43341_CHIP_ID) return TRUE; if (chipid == BCM43143_CHIP_ID) return TRUE; if (chipid == BCM43342_CHIP_ID) return TRUE; if (chipid == BCM4334_CHIP_ID) return TRUE; if (chipid == BCM43239_CHIP_ID) return TRUE; if (chipid == BCM4324_CHIP_ID) return TRUE; if (chipid == BCM4335_CHIP_ID) return TRUE; if (chipid == BCM4339_CHIP_ID) return TRUE; if (chipid == BCM43349_CHIP_ID) return TRUE; if (chipid == BCM4345_CHIP_ID) return TRUE; if (chipid == BCM4350_CHIP_ID) return TRUE; if (chipid == BCM4354_CHIP_ID) return TRUE; if (chipid == BCM4356_CHIP_ID) return TRUE; if (chipid == BCM4358_CHIP_ID) return TRUE; if (chipid == BCM4371_CHIP_ID) return TRUE; if (chipid == BCM43430_CHIP_ID) return TRUE; if (BCM4349_CHIP(chipid)) return TRUE; return FALSE; } 20、 rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ ll 总用量 40 drwxr-xr-x 7 rootroot rootroot 4096 6月 26 12:02 ./ drwx------ 6 rootroot rootroot 4096 6月 26 14:16 ../ drwxr-xr-x 10 rootroot rootroot 4096 9月 4 2014 brandy/ -rw-rw-r-- 1 rootroot rootroot 116 6月 26 12:02 .buildconfig drwxr-xr-x 15 rootroot rootroot 4096 9月 4 2014 buildroot/ -r-xr-xr-x 1 rootroot rootroot 55 9月 4 2014 build.sh* drwxr-xr-x 28 rootroot rootroot 4096 6月 26 14:30 linux-3.4/ drwxrwxr-x 3 rootroot rootroot 4096 6月 26 12:02 out/ -r--r--r-- 1 rootroot rootroot 232 9月 4 2014 README drwxr-xr-x 7 rootroot rootroot 4096 6月 7 19:33 tools/ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ ./build.sh config Welcome to mkscript setup progress All available chips: 0. sun8iw5p1 Choice: 0 All available platforms: 0. android 1. dragonboard 2. linux Choice: 0 All available kernel: 0. linux-3.4 Choice: 0 All available boards: 0. evb 1. maple 2. redwood 3. y2 4. y3 Choice: 4 rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ ./build.sh INFO: ---------------------------------------- INFO: build lichee ... INFO: chip: sun8iw5p1 INFO: platform: android INFO: kernel: linux-3.4 INFO: board: y3 INFO: output: out/sun8iw5p1/android/y3 INFO: ---------------------------------------- INFO: build buildroot ... external toolchain has been installed INFO: build buildroot OK. INFO: build kernel ... INFO: prepare toolchain ... Building kernel CHK include/linux/version.h CHK include/generated/utsrelease.h make[1]: “include/generated/mach-types.h”是最新的。 CALL scripts/checksyscalls.sh CHK include/generated/compile.h CC arch/arm/mach-sunxi/pm/standby/common.o CC arch/arm/mach-sunxi/pm/standby/standby_clock.o CC arch/arm/mach-sunxi/pm/standby/standby_ir.o CC arch/arm/mach-sunxi/pm/standby/standby_key.o CC arch/arm/mach-sunxi/pm/standby/standby_power.o CC arch/arm/mach-sunxi/pm/standby/standby_twi.o CC arch/arm/mach-sunxi/pm/standby/standby_usb.o AS arch/arm/mach-sunxi/pm/standby/standby_delay.o CC arch/arm/mach-sunxi/pm/standby/./arisc/standby_arisc.o CC arch/arm/mach-sunxi/pm/standby/./arisc/arisc_hwmsgbox.o CHK kernel/config_data.h CC arch/arm/mach-sunxi/pm/standby/./arisc/arisc_hwspinlock.o CC arch/arm/mach-sunxi/pm/standby/./arisc/arisc_message_manager.o CC arch/arm/mach-sunxi/pm/standby/./../pm_debug.o CC arch/arm/mach-sunxi/pm/standby/./../mem_timing.o CC arch/arm/mach-sunxi/pm/standby/./../mem_mmu_pc.o AS arch/arm/mach-sunxi/pm/standby/./../mem_mmu_pc_asm.o CC arch/arm/mach-sunxi/pm/standby/./../mem_serial.o CC arch/arm/mach-sunxi/pm/standby/./../mem_printk.o AS arch/arm/mach-sunxi/pm/standby/./../mem_divlib.o CC arch/arm/mach-sunxi/pm/standby/./../mem_divlibc.o CC arch/arm/mach-sunxi/pm/standby/./../mem_int.o CC arch/arm/mach-sunxi/pm/standby/./../mem_tmr.o CC arch/arm/mach-sunxi/pm/standby/./../mem_tmstmp.o CC arch/arm/mach-sunxi/pm/standby/./../mem_clk.o CC arch/arm/mach-sunxi/pm/standby/./../mem_hwspinlock.o CC arch/arm/mach-sunxi/pm/standby/standby.o rm -rf *.o arch/arm/mach-sunxi/pm/standby/../*.o CC arch/arm/mach-sunxi/pm/standby/super/common.o CC arch/arm/mach-sunxi/pm/standby/super/super_twi.o CC [M] drivers/net/wireless/bcmdhd/dhd_sdio.o AS arch/arm/mach-sunxi/pm/standby/super/super_delay.o CC arch/arm/mach-sunxi/pm/standby/super/super_clock.o CC arch/arm/mach-sunxi/pm/standby/super/super_power.o CC arch/arm/mach-sunxi/pm/standby/super/super_cpus.o AS arch/arm/mach-sunxi/pm/standby/super/resume/resume1.o CC arch/arm/mach-sunxi/pm/standby/super/resume/resume_head.o CC arch/arm/mach-sunxi/pm/standby/super/resume/resume1_c_part.o CC arch/arm/mach-sunxi/pm/standby/../pm_debug.o CC arch/arm/mach-sunxi/pm/standby/../mem_timing.o CC arch/arm/mach-sunxi/pm/standby/../mem_mmu_pc.o AS arch/arm/mach-sunxi/pm/standby/../mem_mmu_pc_asm.o CC arch/arm/mach-sunxi/pm/standby/../mem_cpu.o CC arch/arm/mach-sunxi/pm/standby/../mem_serial.o CC arch/arm/mach-sunxi/pm/standby/../mem_printk.o CC [M] drivers/net/wireless/bcmdhd/dhd_cdc.o CC [M] drivers/net/wireless/bcmdhd/bcmsdh_linux.o CC [M] drivers/net/wireless/bcmdhd/dhd_common.o AS arch/arm/mach-sunxi/pm/standby/../mem_divlib.o CC arch/arm/mach-sunxi/pm/standby/../mem_divlibc.o drivers/net/wireless/bcmdhd/dhd_sdio.c: In function ‘dhdsdio_chipmatch’: drivers/net/wireless/bcmdhd/dhd_sdio.c:6936:16: error: ‘BCM43430_CHIP_ID’ undeclared (first use in this function) drivers/net/wireless/bcmdhd/dhd_sdio.c:6936:16: note: each undeclared identifier is reported only once for each function it appears in CC arch/arm/mach-sunxi/pm/standby/../mem_int.o make[4]: *** [drivers/net/wireless/bcmdhd/dhd_sdio.o] 错误 1 make[4]: *** 正在等待未完成的任务.... CC arch/arm/mach-sunxi/pm/standby/../mem_tmr.o CC arch/arm/mach-sunxi/pm/standby/../mem_tmstmp.o CC arch/arm/mach-sunxi/pm/standby/../mem_hwspinlock.o CC arch/arm/mach-sunxi/pm/standby/../mem_clk.o Source file is open Destination file is created. Source file is open Destination file is open. temp value is 400. 0 soure_file size is 9496. destination_file size is 0x2800. check sum generated is 0x68D92007. Everything is ok. rm -rf *.o arch/arm/mach-sunxi/pm/standby/../*.o CC arch/arm/mach-sunxi/pm/mem_mapping.o CC arch/arm/mach-sunxi/pm/mem_divlibc.o CC arch/arm/mach-sunxi/pm/mem_cpu.o AS arch/arm/mach-sunxi/pm/mem_cpu_asm.o AS arch/arm/mach-sunxi/pm/mem_mmu_pc_asm.o CC arch/arm/mach-sunxi/pm/mem_mmu_pc.o CC arch/arm/mach-sunxi/pm/mem_int.o CC arch/arm/mach-sunxi/pm/mem_clk.o CC arch/arm/mach-sunxi/pm/mem_tmr.o CC arch/arm/mach-sunxi/pm/mem_tmstmp.o CC arch/arm/mach-sunxi/pm/mem_twi.o CC arch/arm/mach-sunxi/pm/mem_gpio.o CC arch/arm/mach-sunxi/pm/mem_sram.o CC arch/arm/mach-sunxi/pm/mem_ccu.o CC arch/arm/mach-sunxi/pm/mem_cci400.o CC arch/arm/mach-sunxi/pm/mem_gtbus.o CC arch/arm/mach-sunxi/pm/pm_debug.o CC arch/arm/mach-sunxi/pm/mem_timing.o CC arch/arm/mach-sunxi/pm/mem_hwspinlock.o CC arch/arm/mach-sunxi/pm/pm.o CC arch/arm/mach-sunxi/pm/extended_standby.o CC arch/arm/mach-sunxi/pm/standby/super/super_power.o CC arch/arm/mach-sunxi/pm/standby/super/super_twi.o CC arch/arm/mach-sunxi/pm/standby/super/super_clock.o AS arch/arm/mach-sunxi/pm/standby.o AS arch/arm/mach-sunxi/pm/mem.o LD arch/arm/mach-sunxi/pm/pm_tmp.o LD arch/arm/mach-sunxi/pm/built-in.o LD arch/arm/mach-sunxi/built-in.o make[3]: *** [drivers/net/wireless/bcmdhd] 错误 2 make[2]: *** [drivers/net/wireless] 错误 2 make[1]: *** [drivers/net] 错误 2 make: *** [drivers] 错误 2 ERROR: build kernel Failed rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ 21、（dhdsdio_probe_attach: unsupported chip: 0xa9a6） R:\wyb\ap6212a0_a33_sc3817r\lichee\linux-3.4\drivers\net\wireless\bcmdhd\include\bcmdevs.h #define BCM4350_CHIP_ID 0x4350 #define BCM43430_CHIP_ID 43430 /* 43430 chipcommon chipid 0xa9a6 */ #define BCM4342_CHIP_ID 4342 可以编译通过了。 （查看属性：） shell@astar-y3:/ $ shell@astar-y3:/ $ cd /system/vendor/modules/ shell@astar-y3:/system/vendor/modules $ ll bcm* -rw-r--r-- root root 26020 2017-06-26 12:46 bcm43438a0.hcd -rw-r--r-- root root 748856 2017-06-26 12:46 bcmdhd.ko shell@astar-y3:/system/vendor/modules $ Microsoft Windows [版本 6.1.7600] 版权所有 (c) 2009 Microsoft Corporation。保留所有权利。 C:\Users\Administrator>cd R:\wyb\ap6212a0_a33_sc3817r\lichee\linux-3.4\drivers\n et\wireless\bcmdhd C:\Users\Administrator>r: R:\wyb\ap6212a0_a33_sc3817r\lichee\linux-3.4\drivers\net\wireless\bcmdhd>adb remount * daemon not running. starting it now on port 5037 * * daemon started successfully * remount succeeded R:\wyb\ap6212a0_a33_sc3817r\lichee\linux-3.4\drivers\net\wireless\bcmdhd> R:\wyb\ap6212a0_a33_sc3817r\lichee\linux-3.4\drivers\net\wireless\bcmdhd>adb push bcmdhd.ko /system/vendor/modules/ 1677 KB/s (748864 bytes in 0.436s) R:\wyb\ap6212a0_a33_sc3817r\lichee\linux-3.4\drivers\net\wireless\bcmdhd> 继续查看属性： shell@astar-y3:/system/vendor/modules $ ll bcm* -rw-r--r-- root root 26020 2017-06-26 12:46 bcm43438a0.hcd -rw-rw-rw- root root 748864 2017-06-26 14:34 bcmdhd.ko shell@astar-y3:/system/vendor/modules $ shell@astar-y3:/system/vendor/modules $ shell@astar-y3:/system/vendor/modules $ chmod 644 bcmdhd.ko Unable to chmod bcmdhd.ko: Operation not permitted 10|shell@astar-y3:/system/vendor/modules $ （必须在su下才能够修改属性：） shell@astar-y3:/system/vendor/modules $ su shell@astar-y3:/system/vendor/modules # chmod 644 bcmdhd.ko shell@astar-y3:/system/vendor/modules # shell@astar-y3:/system/vendor/modules # sync shell@astar-y3:/system/vendor/modules # reboot 22、 [ 0.658241] [wifi]: select wifi: ap6210 !! [ 0.658587] [ap6xxx]: module power name axp22_dldo1 [ 0.658601] [ap6xxx]: module power ext1 name axp22_dldo2 [ 0.658613] [ap6xxx]: module power ext2 name axp22_aldo1 [ 0.658721] [ap6xxx]: get ap6xxx wifi_power_switch failed [ 0.658731] [ap6xxx]: ap6xxx module power set by axp. [ 0.658930] [ap6xxx]: first time [ 0.659285] [ap6xxx]: regulator on. [ 0.661306] [wifi_pm]: wifi gpio init is OK !! （重启之后，WIFI模块要想办法配置为ap6212，现阶段借用的是AP6210！） [ 8.517657] gpio ap6xxx_wl_regon set val 1, act val 1 [ 8.623325] [ap6xxx]: sdio wifi power state: on [ 8.628389] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 8.628566] =========== WLAN placed in POWER ON ======== [ 8.645459] [mmc]: sdc1 card_power_on start... [ 8.650397] [mmc]: sdc1 power_supply is null [ 8.655129] [mmc]: sdc1 card_power_on ok [ 8.680031] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 8.690267] [mmc]: mclk 0xf1c2008c 0x8002000e [ 8.772360] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 52, RTO !! [ 8.781316] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 52, RTO !! [ 8.789448] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 8.799684] [mmc]: mclk 0xf1c2008c 0x8002000e [ 8.861971] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 8.872189] [mmc]: mclk 0xf1c2008c 0x8002000e [ 8.933887] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 8, RTO !! [ 8.941921] *******************Try sdio******************* [ 8.948329] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 8.958545] [mmc]: mclk 0xf1c2008c 0x8002000e [ 9.027690] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 9.035325] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 9.043192] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 9.052046] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 9.145358] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B [ 9.155486] [mmc]: mclk 0xf1c2008c 0x8002000e [ 9.215398] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B [ 9.225785] [mmc]: mclk 0xf1c2008c 0x8100000b [ 9.285721] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 9.296049] [mmc]: mclk 0xf1c2008c 0x8140030b [ 9.357922] mmc1: new high speed SDIO card at address 0001 [ 9.364523] bcmsdh_register: Linux Kernel SDIO/MMC Driver [ 9.364563] *******************sdio init ok******************* [ 9.377203] bcm_wlan_get_oob_irq enter. [ 9.381534] gpio [359] map to virq [7] ok [ 9.388816] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4 [ 9.396740] DHD: dongle ram size is set to 524288(orig 524288) at 0x0 [ 9.404660] dhdsdio_probe: Disable prop_txstatus [ 9.410903] wl_create_event_handler(): thread:wl_event_handler:5d started [ 9.410914] tsk Enter, tsk = 0xddca13d8 [ 9.423788] p2p0: P2P Interface Registered [ 9.428464] dhd_attach(): thread:dhd_watchdog_thread:5e started [ 9.435144] dhd_attach(): thread:dhd_dpc:5f started [ 9.440653] dhd_attach(): thread:dhd_sysioc:60 started [ 9.447276] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33 [ 9.456558] [ 9.456561] Dongle Host Driver, version 1.88.45.3 (r420671) [ 9.456565] Compiled in drivers/net/wireless/bcmdhd on Jun 26 2017 at 14:34:04 [ 9.472427] gpio ap6xxx_wl_regon set val 0, act val 0 [ 9.578054] [ap6xxx]: sdio wifi power state: off [ 9.583186] =========== WLAN placed in RESET ======== （WIFI启动加载正常） shell@astar-y3:/ $ lsmod gt82x 9849 0 - Live 0x00000000 sunxi_schw 12559 0 - Live 0x00000000 (O) cdc_ether 5099 0 - Live 0x00000000 rtl8150 9023 0 - Live 0x00000000 mcs7830 6292 0 - Live 0x00000000 qf9700 7805 0 - Live 0x00000000 asix 17150 0 - Live 0x00000000 usbnet 17700 4 cdc_ether,mcs7830,qf9700,asix, Live 0x00000000 sunxi_keyboard 3021 0 - Live 0x00000000 sw_device 13604 0 - Live 0x00000000 vfe_v4l2 445364 0 - Live 0x00000000 gc2035 12696 0 - Live 0x00000000 gc0308 10702 0 - Live 0x00000000 vfe_subdev 4523 3 vfe_v4l2,gc2035,gc0308, Live 0x00000000 vfe_os 4099 2 vfe_v4l2,vfe_subdev, Live 0x00000000 cci 21594 2 gc2035,gc0308, Live 0x00000000 videobuf_dma_contig 5535 1 vfe_v4l2, Live 0x00000000 videobuf_core 16520 2 vfe_v4l2,videobuf_dma_contig, Live 0x00000000 bcmdhd 556965 0 - Live 0x00000000 leds_sunxi 1351 0 - Live 0x00000000 mali 209914 20 - Live 0x00000000 (O) lcd 38180 0 - Live 0x00000000 disp 993096 8 mali,lcd, Live 0x00000000 nand 280622 0 - Live 0x00000000 (O) shell@astar-y3:/ $ （bcmdhd.ko这个驱动模块加载正常：） （BT没有打开，但是不停地打印BT超时出错，不知道是何解？） shell@astar-y3:/ $ [ 511.880344] [BT_LPM] bluesleep_tx_timer_expire: Tx timer expired [ 511.887326] [BT_LPM] bluesleep_tx_timer_expire: Tx has been idle 23、 由于此时WIFI出于记住上一次的状态的状态（打不开），所以需要重新刷镜像IMG，然后替换：bcmdhd.ko shell@astar-y3:/ $ shell@astar-y3:/ $ lsmod gt82x 9849 0 - Live 0x00000000 sunxi_schw 12559 0 - Live 0x00000000 (O) cdc_ether 5099 0 - Live 0x00000000 rtl8150 9023 0 - Live 0x00000000 mcs7830 6292 0 - Live 0x00000000 qf9700 7805 0 - Live 0x00000000 asix 17150 0 - Live 0x00000000 usbnet 17700 4 cdc_ether,mcs7830,qf9700,asix, Live 0x00000000 sunxi_keyboard 3021 0 - Live 0x00000000 sw_device 13604 0 - Live 0x00000000 vfe_v4l2 445364 0 - Live 0x00000000 gc2035 12696 0 - Live 0x00000000 gc0308 10702 0 - Live 0x00000000 vfe_subdev 4523 3 vfe_v4l2,gc2035,gc0308, Live 0x00000000 vfe_os 4099 2 vfe_v4l2,vfe_subdev, Live 0x00000000 cci 21594 2 gc2035,gc0308, Live 0x00000000 videobuf_dma_contig 5535 1 vfe_v4l2, Live 0x00000000 videobuf_core 16520 2 vfe_v4l2,videobuf_dma_contig, Live 0x00000000 bcmdhd 556965 0 - Live 0x00000000 leds_sunxi 1351 0 - Live 0x00000000 mali 209914 15 - Live 0x00000000 (O) lcd 38180 0 - Live 0x00000000 disp 993096 8 mali,lcd, Live 0x00000000 nand 280622 0 - Live 0x00000000 (O) shell@astar-y3:/ $ shell@astar-y3:/ $ shell@astar-y3:/ $ [ 110.012176] init: computing context for service '/system/bin/wpa_supplicant' [ 110.025400] init: starting 'p2p_supplicant' [ 110.039886] init: Created socket '/dev/socket/wpa_wlan0' with mode '660', user '1010', group '1010' [ 110.119751] dhd_conf_set_fw_name_by_chip: firmware_path=/system/vendor/modules/fw_bcm43438a0.bin [ 110.140144] [ 110.140153] Dongle Host Driver, version 1.88.45.3 (r420671) [ 110.140158] Compiled in drivers/net/wireless/bcmdhd on Jun 26 2017 at 14:34:04 [ 110.173523] wl_android_wifi_on in 1 [ 110.177409] wl_android_wifi_on in 2: g_wifi_on=0 [ 110.200103] gpio ap6xxx_wl_regon set val 1, act val 1 [ 110.280025] [BT_LPM] bluesleep_tx_timer_expire: Tx timer expired [ 110.286694] [BT_LPM] bluesleep_tx_timer_expire: Tx has been idle [ 110.355684] [ap6xxx]: sdio wifi power state: on [ 110.360930] =========== WLAN going back to live ======== [ 110.366925] sdio_reset_comm(): [ 110.370346] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 110.380773] [mmc]: mclk 0xf1c2008c 0x8140030b [ 110.443029] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 110.454758] [mmc]: mclk 0xf1c2008c 0x8140030b [ 110.516097] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 110.530958] [mmc]: mclk 0xf1c2008c 0x80430309 [ 110.592013] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 110.603518] [mmc]: mclk 0xf1c2008c 0x80030009 [ 110.681418] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 110.690726] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 110.700331] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 110.712218] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 110.894520] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 110.904933] [mmc]: mclk 0xf1c2008c 0x80030009 [ 110.964907] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 110.975514] [mmc]: mclk 0xf1c2008c 0x8100000b [ 111.035618] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 111.046398] [mmc]: mclk 0xf1c2008c 0x8140030b [ 111.108547] [ 111.108566] [ 111.108579] dhd_bus_devreset: == WLAN ON == [ 111.116882] dhd_bus_devreset called when dongle is not in reset [ 111.123683] Will call dhd_bus_start instead [ 111.128637] dhd_conf_set_fw_name_by_chip: firmware_path=/system/vendor/modules/fw_bcm43438a0.bin [ 111.140963] dhd_conf_download_config: Ignore config file /system/vendor/modules/config.txt [ 111.151802] Final fw_path=/system/vendor/modules/fw_bcm43438a0.bin [ 111.158689] Final nv_path=/system/vendor/modules/nvram_ap6210.txt [ 111.165542] Final conf_path=/system/vendor/modules/config.txt [ 111.257577] dhdsdio_download_nvram: Open nvram file failed /system/vendor/modules/nvram_ap6210.txt [ 111.268309] _dhdsdio_download_firmware: dongle nvram file download failed [ 111.276022] dhd_bus_start: dhdsdio_probe_download failed. firmware = /system/vendor/modules/fw_bcm43438a0.bin nvram = /system/vendor/modules/nvram_ap6210.txt config = /system/vendor/modules/config.txt [ 111.295979] dhd_bus_devreset: dhd_bus_start fail with -1 [ 111.304154] dhd_dev_reset: dhd_bus_devreset: -1 [ 111.309190] dhd_prot_ioctl : bus is down. we have nothing to do [ 111.330328] dhd_bus_devreset: WLAN OFF DONE [ 111.335225] gpio ap6xxx_wl_regon set val 0, act val 0 [ 111.472499] [ap6xxx]: sdio wifi power state: off [ 111.477661] =========== WLAN placed in RESET ======== [ 111.483304] wl_android_wifi_on: Failed [ 111.487473] wl_android_wifi_off in 1 [ 111.491478] wl_android_wifi_off in 2: g_wifi_on=0 [ 111.496711] wl_android_wifi_off out [ 111.509335] init: waitpid returned pid 1211, status = 0000ff00 [ 111.516072] init: process 'p2p_supplicant', pid 1211 exited shell@astar-y3:/ $ shell@astar-y3:/ $ 24、定位问题：dhd_bus_devreset: dhd_bus_start fail with -1 rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ cd linux-3.4/drivers/net/wireless/bcmdhd/ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ grep "dhd_bus_start fail with" . -R ./dhd_sdio.c: DHD_ERROR(("%s: dhd_bus_start fail with %d\n", 匹配到二进制文件 ./dhd_sdio.o 匹配到二进制文件 ./bcmdhd.o 匹配到二进制文件 ./bcmdhd.ko rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee$ cd linux-3.4/drivers/net/wireless/bcmdhd/ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ grep "dhd_bus_start fail with" . -R ./dhd_sdio.c: DHD_ERROR(("%s: dhd_bus_start fail with %d\n", 匹配到二进制文件 ./dhd_sdio.o 匹配到二进制文件 ./bcmdhd.o 匹配到二进制文件 ./bcmdhd.ko rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ int dhd_bus_devreset(dhd_pub_t *dhdp, uint8 flag) { …… dhd_conf_set_fw_name_by_chip(dhdp, fw_path, firmware_path); if ((bcmerror = dhd_bus_start(dhdp)) != 0) DHD_ERROR(("%s: dhd_bus_start fail with %d\n", __FUNCTION__, bcmerror)); } } return bcmerror; } rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ grep dhd_bus_start . -R ./dhd_sdio.c: if ((ret = dhd_bus_start(bus->dhd)) != 0) { ./dhd_sdio.c: DHD_ERROR(("%s: dhd_bus_start failed\n", __FUNCTION__)); ./dhd_sdio.c: DHD_ERROR(("Will call dhd_bus_start instead\n")); ./dhd_sdio.c: if ((bcmerror = dhd_bus_start(dhdp)) != 0) ./dhd_sdio.c: DHD_ERROR(("%s: dhd_bus_start fail with %d\n", ./dhd_sdio - 副本.c: if ((ret = dhd_bus_start(bus->dhd)) != 0) { ./dhd_sdio - 副本.c: DHD_ERROR(("%s: dhd_bus_start failed\n", __FUNCTION__)); ./dhd_sdio - 副本.c: DHD_ERROR(("Will call dhd_bus_start instead\n")); ./dhd_sdio - 副本.c: if ((bcmerror = dhd_bus_start(dhdp)) != 0) ./dhd_sdio - 副本.c: DHD_ERROR(("%s: dhd_bus_start fail with %d\n", ./dhd_sdio - 副本 (2).c: if ((ret = dhd_bus_start(bus->dhd)) != 0) { ./dhd_sdio - 副本 (2).c: DHD_ERROR(("%s: dhd_bus_start failed\n", __FUNCTION__)); ./dhd_sdio - 副本 (2).c: DHD_ERROR(("Will call dhd_bus_start instead\n")); ./dhd_sdio - 副本 (2).c: if ((bcmerror = dhd_bus_start(dhdp)) != 0) ./dhd_sdio - 副本 (2).c: DHD_ERROR(("%s: dhd_bus_start fail with %d\n", ./dhd.h:extern int dhd_bus_start(dhd_pub_t *dhdp); ./wl_android.c:/* Initialize g_wifi_on to 1 so dhd_bus_start will be called for the first ./dhd_linux.c: if ((ret = dhd_bus_start(&dhd->pub)) != 0) { ./dhd_linux.c: /* dhd_prot_init has been called in dhd_bus_start or wl_android_wifi_on */ ./dhd_linux.c:dhd_bus_start(dhd_pub_t *dhdp) rootroot@rootroot-E400:~/wyb/ap6212a0_a33_sc3817r/lichee/linux-3.4/drivers/net/wireless/bcmdhd$ 定位到这里： int dhd_bus_start(dhd_pub_t *dhdp) { …… /* try to download image and nvram to the dongle */ if ((dhd->pub.busstate == DHD_BUS_DOWN) && (fw_path[0] != '\0') && (nv_path[0] != '\0')) { #ifdef SHOW_NVRAM_TYPE { /* Show nvram type in the kernel log */ int i; for (i = 0; nv_path[i] != '\0'; ++i) { if (nv_path[i] == '.') { ++i; break; } } DHD_ERROR(("%s: nvram_type = [%s]\n", __FUNCTION__, &nv_path[i])); } #endif /* SHOW_NVRAM_TYPE */ /* wake lock moved to dhdsdio_download_firmware */ if (!(dhd_bus_download_firmware(dhd->pub.bus, dhd->pub.osh, fw_path, nv_path, conf_path))) { DHD_ERROR(("%s: dhdsdio_probe_download failed. firmware = %s nvram = %s config = %s\n", __FUNCTION__, fw_path, nv_path, conf_path)); #ifdef DHDTHREAD if (dhd->threads_only) dhd_os_sdunlock(dhdp); #endif /* DHDTHREAD */ // 2017/6/23 18:40 wenyuanbo download ap6212 fail not return error!!!! //return -1; } } …… return 0; } 由于ap6212没有config.txt文件，下载肯定会出错，比对全志R16平台去AP6212的处理，关闭这里： //return -1; 25、 shell@astar-y3:/ $ shell@astar-y3:/ $ [ 110.012176] init: computing context for service '/system/bin/wpa_supplicant' [ 110.025400] init: starting 'p2p_supplicant' [ 110.039886] init: Created socket '/dev/socket/wpa_wlan0' with mode '660', user '1010', group '1010' [ 110.119751] dhd_conf_set_fw_name_by_chip: firmware_path=/system/vendor/modules/fw_bcm43438a0.bin [ 110.140144] [ 110.140153] Dongle Host Driver, version 1.88.45.3 (r420671) [ 110.140158] Compiled in drivers/net/wireless/bcmdhd on Jun 26 2017 at 14:34:04 [ 110.173523] wl_android_wifi_on in 1 [ 110.177409] wl_android_wifi_on in 2: g_wifi_on=0 [ 110.200103] gpio ap6xxx_wl_regon set val 1, act val 1 [ 110.280025] [BT_LPM] bluesleep_tx_timer_expire: Tx timer expired [ 110.286694] [BT_LPM] bluesleep_tx_timer_expire: Tx has been idle [ 110.355684] [ap6xxx]: sdio wifi power state: on [ 110.3

立即下载

上传者： wb4916 时间： 2017-06-26

80-n9912-78_a_android_software_release_plan_-_february_2020.pdf

Android Release Version Mapping • AndroidAndroidTM 8.0 Oreo OreoTM release August 21, 2017 ◦ All devices launching with GMS applications after March 31, 2018 must use Android Oreo • AndroidAndroidTM 8.1 Oreo OreoTM MR1 release December 5, 2017 ◦ GMS approval window closes on December 31, 2018 ◦ GMS Go approval window closes on October 31, 2019 • Android 9.0 Pie release August 6, 2018 ◦ All devices launching with GMS applications after December 31, 2018 must use Android Pie ◦ All devices launching with GMS Go applications after October 31, 2019 must use Android Pie Go edition • Google has provided an GMS certification window extension for Android O Go based devices from February 2019 to October 2019* ◦ GMS approval window closes on January 31, 2020 • Android 10.0 release September 3, 2019 ◦ All devices launching with GMS applications after January 31, 2020 must use Android 10 including Go edition devices.

立即下载

上传者： leehs334 时间： 2020-03-26

GMS-Feature-Matcher-master.zip_GMS 匹配_GMS-Feature-Matcher_gms fe

特征点匹配，Feature point matching Feature point matching

立即下载

上传者： weixin_42652674 时间： 2022-09-15

com.google.android.gms_19.4.20_(100400-271418971)-19420037_minAPI28(nodpi)

Google Play Services，对于一些需要Google Play Services的APP有用，从APKMIrror中搬运过来的

立即下载

上传者： kookochow 时间： 2019-10-11