.Net Micro Framework研究—带I2C总线的模拟器

I2C以前没有怎么接触过，所以做它的模拟功能，只能靠着感觉走，有不妥之处，还望方家指正。做出了spi相关的模拟功能，做I2C相对也就不难了，只不过用户操作I2C总线读写数据的时候要稍微麻烦一点。

测试程序运行界面：

模拟器中的I2C总线的相关代码如下：

public class I2CComponent : I2cDevice

{

public byte[] bytData = new byte[8];

protected override void DeviceRead(byte[] data)

{

try

{

for (int i = 0; i < data.Length; i++)

{

if (i < bytData.Length) data[i] = bytData[i];

}

}

catch { }

base.DeviceRead(data);

}

protected override void DeviceWrite(byte[] data)

{

try

{

for (int i = 0; i < data.Length; i++)

{

if (i < bytData.Length) bytData[i] = data[i];

}

}

catch { }

base.DeviceWrite(data);

}

protected override void DeviceBeginTransaction()

{

base.DeviceBeginTransaction();

}

protected override void DeviceEndTransaction()

{

base.DeviceEndTransaction();

}

}

测试代码如下（还是在原来程序的基础上进行扩充）：

static SPI _spi;

public static void Main()

{

OutputPort[] output = new OutputPort[8];

InputPort[] input = new InputPort[8];

//叶帆模拟器GPIO的pin定义

Cpu.Pin[] pin_I = new Cpu.Pin[8] { (Cpu.Pin)10, (Cpu.Pin)11, (Cpu.Pin)12, (Cpu.Pin)13, (Cpu.Pin)14,(Cpu.Pin)15, (Cpu.Pin)16, (Cpu.Pin)17 };

Cpu.Pin[] pin_Q = new Cpu.Pin[8] { (Cpu.Pin)20, (Cpu.Pin)21, (Cpu.Pin)22, (Cpu.Pin)23, (Cpu.Pin)24, (Cpu.Pin)25, (Cpu.Pin)26, (Cpu.Pin)27 };

//SPI的pin定义

_spi=new SPI(new SPI.Configuration((Cpu.Pin)30, true, 0, 0, false, false, 4000, SPI.SPI_module.SPI1));

//I2C定义 模拟器I2C地址为100 时钟速度不要设置太小否则会有问题

I2CDevice I2CBus = new I2CDevice(new I2CDevice.Configuration(100, 200));

for (int i = 0; i < 8; i++)

{

input[i] = new InputPort(pin_I[i], false, Port.ResistorMode.PullDown);

output[i] = new OutputPort(pin_Q[i], false);

}

int intNum = 0;

while (true)

{

output[intNum].Write(!output[intNum].Read());

Debug.Print("I : "+input[0].Read().ToString() + " " + input[1].Read().ToString() + " " + input[2].Read().ToString() + " " + input[3].Read().ToString() + " " + input[4].Read().ToString()+ " " + input[5].Read().ToString() + " " + input[6].Read().ToString() + " " + input[7].Read().ToString());

Debug.Print("AD: "+ReadWriteAD((Int16)intNum).ToString() + " " + intNum.ToString());

//---------------------------------------

//I2C读写

byte[] bytRData = new byte[8];

byte[] bytWData = new byte[3];

bytWData[0] = (byte)intNum;

bytWData[1] = (byte)(intNum * 2);

bytWData[2] = (byte)(intNum * 3);

I2CDevice.I2CTransaction[] i2c = new I2CDevice.I2CTransaction[2];

i2c[0]=I2CBus.CreateReadTransaction(bytRData);

i2c[1] = I2CBus.CreateWriteTransaction(bytWData);

I2CBus.Execute(i2c, 100); //执行

Debug.Print("I2C : " + bytRData[0].ToString() + " " + bytRData[1].ToString() + " " + bytRData[2].ToString() + " " + bytRData[3].ToString() + " " + bytRData[4].ToString() + " " + bytRData[5].ToString() + " " + bytRData[6].ToString() + " " + bytRData[7].ToString());

//---------------------------------------

if (++intNum > 7) intNum = 0;

Thread.Sleep(800);

}

}

public static Int16 ReadWriteAD(Int16 value)

{

byte[] bout = new byte[2];

byte[] bin = new byte[2];

bout[0] = (byte)(value >> 8);

bout[1] = (byte)(value & 0xff);

_spi.WriteRead(bout, bin);

Int16 aw0=(Int16)((bin[0] << 8) + bin[1]);

return aw0;

}

}

好了，模拟器的工作暂时告一个段落，有时间把该模拟器完善一下，给感兴趣的网友共享，这样就不用购买硬件就可以测试一些有意思的代码和功能了（一个测试板卡要好几百美元呢!）。